Just curious...

Junior370z · 05-17-2009, 12:25 PM

Has anyone seen 1/4 times with the Z with exhaust set up and intake yet? With a stock time of about 13.4, you think it would break 12s with those simple mods?

NotmyGTR · 05-17-2009, 01:08 PM

Havent seen anything yet. Dont think it will be that much of a change. In order for response to be affected, gotta do headers,downpipes,exhaust. Still, you have to take into consideration driver ability.............Some guys just simpley cant launch.

Junior370z · 05-17-2009, 02:58 PM

So having the intake and exhaust won't take off 1/2 a second? Hmm... Interesting...

NotmyGTR · 05-17-2009, 03:50 PM

Have to change everything in the intake/exhaust to change the car. Larger volume intakes give you the ability to increase air flow in. Simply swapping intakes and exhaust doesnt "open up" air flow restrictions. Changing everything on the exhaust from headers back will increase flow, decreasing backpressure, then allowing quicker response.

The whole half a second thing.....once again that will depend on the driver. Even bone stock your average Joe wont pull the 13.4 that the car is capable of. By no means am I saying you are an average Joe behind the wheel, so please dont take it that way. Best way to find out I guess is to clock your own 1/4 time, swap out all of your air flow parts, run the 1/4 again.

There are more than a few parts out there from different manufacturers that will give you different results as well. Berk for instance has there HFC's that seem to be popular with a few on this site. I personally ordered these from overseas: http://www.mines-wave.com Just click on the Fairlady tab and scroll down to the straight pipes. Absolutely no restriction with these.

Junior370z · 05-17-2009, 05:23 PM

I already have my stillen intake and exhaust. I agree on Berk HFCs being the choice for most. I personally will purchase the stillen HFC. I don't think I'll buy headers though. I don't want to alter too much on the Z until the warranty expires or soon expire (wife will kill me LOL!) Hopefully with those simple mods will make some difference. Thanks for your thoughts on the matter!

NotmyGTR · 05-17-2009, 09:29 PM

You will see some change, but it wont be full potential of changing the headers as well. The entire system is the breathability. Even if you change the cats and exhaust, the exhale of your engine is still restricted with the stock headers. You will see and feel a difference Im sure, but still not the complete difference until you open all restrictions in the exhaust side.

I feel you on the wife thing, I hear about it everyday. She is used to me spending rediculous amounts for the Japanese market products, vice what can be purchased here in the U.S. My trick is just to take her shopping so she can spend a couple hundred here and there.......and she will leave me alone for a mod or two.

Junior370z · 05-17-2009, 10:00 PM

True that! The extra $$ and special dinner I gave her for mothers day hasn't worked yet though LOL! She knows what I'm up too!

m4a1mustang · 05-17-2009, 10:03 PM

I'm starting to learn the whole part for a part business. If I want my HFCs, I've got to buy her a handbag first.

NotmyGTR · 05-17-2009, 10:17 PM

Mine just broke the news to me about a new Lous Vuitton handbag she wants.......of course she broke that to me while I was looking at a complete twin sports turbo kit. My wife is Japanese, guess it dosnt matter where you come from, they all want the same things in trade for letting us buy parts.

m4a1mustang · 05-17-2009, 10:20 PM

Quote:

Originally Posted by NotmyGTR

Mine just broke the news to me about a new Lous Vuitton handbag she wants.......of course she broke that to me while I was looking at a complete twin sports turbo kit. My wife is Japanese, guess it dosnt matter where you come from, they all want the same things in trade for letting us buy parts.

Yeah, I showed my gf the TT kit and learned that I am not allowed to buy it until she has a ring on her finger of equal or greater value. So yeah, my TT kit is going to cost me like $20k... but that's alright.

NotmyGTR · 05-17-2009, 10:23 PM

Quote:

Originally Posted by m4a1mustang

Yeah, I showed my gf the TT kit and learned that I am not allowed to buy it until she has a ring on her finger of equal or greater value. So yeah, my TT kit is going to cost me like $20k... but that's alright.

Damn, thats the kit......cams.......pistons......crank.......gotta love it. The price we pay.

Where at in Va are you? Im moving to Va Beach in 3 months. Whats it like?

Junior370z · 05-17-2009, 10:28 PM

Quote:

Originally Posted by m4a1mustang

Yeah, I showed my gf the TT kit and learned that I am not allowed to buy it until she has a ring on her finger of equal or greater value. So yeah, my TT kit is going to cost me like $20k... but that's alright.

I guess the "love" toward them hold no "value" these days LOL!

m4a1mustang · 05-17-2009, 10:30 PM

Quote:

Originally Posted by NotmyGTR

Damn, thats the kit......cams.......pistons......crank.......gotta love it. The price we pay.

Were at in Va are you? Im moving to Va Beach in 3 months. Whats it like?

I'm up in Northern VA, close to D.C.

VA Beach is pretty nice if you're a car guy. They aren't as strict down there as they are up here, plus you've got the beach and F/A-18s flying low all day long.

05-17-2009, 12:25 PM	#1 (permalink)
Junior370z A True Z Fanatic Join Date: Apr 2009 Location: Las Vegas Age: 50 Posts: 1,024 Drives: over the speed limit Rep Power: 293	Just curious... Has anyone seen 1/4 times with the Z with exhaust set up and intake yet? With a stock time of about 13.4, you think it would break 12s with those simple mods? __________________ DON'T DO IT! ( Click to show/hide ) Stillen CBECAI-U/D PulleyGround KitSwaysSetrab Oil CoolerIchiba Rear Camber KitAgility CoiloverBerk HFCTechnosquare TuneGT-R ButtonVenaci MeshSP Performance Cross Drilled/Slotted RotorsSPC Toe BoltsBomex LipMud flapsAero Jacket Type III WingSold

05-17-2009, 01:08 PM	#2 (permalink)
NotmyGTR Base Member Join Date: May 2009 Location: TX Posts: 177 Drives: 09 370Z/Pearl 6speed Rep Power: 16	Waiting myself Havent seen anything yet. Dont think it will be that much of a change. In order for response to be affected, gotta do headers,downpipes,exhaust. Still, you have to take into consideration driver ability.............Some guys just simpley cant launch. __________________ 1996 Skyline GT-R LM fully tuned by Mines/2006 Nissan Titan 5.6 SE Texas Edition/2009 370 Base w Sport Pkg

05-17-2009, 02:58 PM	#3 (permalink)
Junior370z A True Z Fanatic Join Date: Apr 2009 Location: Las Vegas Age: 50 Posts: 1,024 Drives: over the speed limit Rep Power: 293	So having the intake and exhaust won't take off 1/2 a second? Hmm... Interesting... __________________ DON'T DO IT! ( Click to show/hide ) Stillen CBECAI-U/D PulleyGround KitSwaysSetrab Oil CoolerIchiba Rear Camber KitAgility CoiloverBerk HFCTechnosquare TuneGT-R ButtonVenaci MeshSP Performance Cross Drilled/Slotted RotorsSPC Toe BoltsBomex LipMud flapsAero Jacket Type III WingSold

05-17-2009, 03:50 PM	#4 (permalink)
NotmyGTR Base Member Join Date: May 2009 Location: TX Posts: 177 Drives: 09 370Z/Pearl 6speed Rep Power: 16	more than that Have to change everything in the intake/exhaust to change the car. Larger volume intakes give you the ability to increase air flow in. Simply swapping intakes and exhaust doesnt "open up" air flow restrictions. Changing everything on the exhaust from headers back will increase flow, decreasing backpressure, then allowing quicker response. The whole half a second thing.....once again that will depend on the driver. Even bone stock your average Joe wont pull the 13.4 that the car is capable of. By no means am I saying you are an average Joe behind the wheel, so please dont take it that way. Best way to find out I guess is to clock your own 1/4 time, swap out all of your air flow parts, run the 1/4 again. There are more than a few parts out there from different manufacturers that will give you different results as well. Berk for instance has there HFC's that seem to be popular with a few on this site. I personally ordered these from overseas: http://www.mines-wave.com Just click on the Fairlady tab and scroll down to the straight pipes. Absolutely no restriction with these. __________________ 1996 Skyline GT-R LM fully tuned by Mines/2006 Nissan Titan 5.6 SE Texas Edition/2009 370 Base w Sport Pkg Last edited by NotmyGTR; 05-17-2009 at 09:24 PM.

05-17-2009, 05:23 PM	#5 (permalink)
Junior370z A True Z Fanatic Join Date: Apr 2009 Location: Las Vegas Age: 50 Posts: 1,024 Drives: over the speed limit Rep Power: 293	I already have my stillen intake and exhaust. I agree on Berk HFCs being the choice for most. I personally will purchase the stillen HFC. I don't think I'll buy headers though. I don't want to alter too much on the Z until the warranty expires or soon expire (wife will kill me LOL!) Hopefully with those simple mods will make some difference. Thanks for your thoughts on the matter! __________________ DON'T DO IT! ( Click to show/hide ) Stillen CBECAI-U/D PulleyGround KitSwaysSetrab Oil CoolerIchiba Rear Camber KitAgility CoiloverBerk HFCTechnosquare TuneGT-R ButtonVenaci MeshSP Performance Cross Drilled/Slotted RotorsSPC Toe BoltsBomex LipMud flapsAero Jacket Type III WingSold

05-17-2009, 09:29 PM	#6 (permalink)
NotmyGTR Base Member Join Date: May 2009 Location: TX Posts: 177 Drives: 09 370Z/Pearl 6speed Rep Power: 16	slight You will see some change, but it wont be full potential of changing the headers as well. The entire system is the breathability. Even if you change the cats and exhaust, the exhale of your engine is still restricted with the stock headers. You will see and feel a difference Im sure, but still not the complete difference until you open all restrictions in the exhaust side. I feel you on the wife thing, I hear about it everyday. She is used to me spending rediculous amounts for the Japanese market products, vice what can be purchased here in the U.S. My trick is just to take her shopping so she can spend a couple hundred here and there.......and she will leave me alone for a mod or two. __________________ 1996 Skyline GT-R LM fully tuned by Mines/2006 Nissan Titan 5.6 SE Texas Edition/2009 370 Base w Sport Pkg

05-17-2009, 10:00 PM	#7 (permalink)
Junior370z A True Z Fanatic Join Date: Apr 2009 Location: Las Vegas Age: 50 Posts: 1,024 Drives: over the speed limit Rep Power: 293	True that! The extra $$ and special dinner I gave her for mothers day hasn't worked yet though LOL! She knows what I'm up too! __________________ DON'T DO IT! ( Click to show/hide ) Stillen CBECAI-U/D PulleyGround KitSwaysSetrab Oil CoolerIchiba Rear Camber KitAgility CoiloverBerk HFCTechnosquare TuneGT-R ButtonVenaci MeshSP Performance Cross Drilled/Slotted RotorsSPC Toe BoltsBomex LipMud flapsAero Jacket Type III WingSold

05-17-2009, 10:03 PM	#8 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	I'm starting to learn the whole part for a part business. If I want my HFCs, I've got to buy her a handbag first. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

05-17-2009, 10:17 PM	#9 (permalink)
NotmyGTR Base Member Join Date: May 2009 Location: TX Posts: 177 Drives: 09 370Z/Pearl 6speed Rep Power: 16	Me too Me too Mine just broke the news to me about a new Lous Vuitton handbag she wants.......of course she broke that to me while I was looking at a complete twin sports turbo kit. My wife is Japanese, guess it dosnt matter where you come from, they all want the same things in trade for letting us buy parts. __________________ 1996 Skyline GT-R LM fully tuned by Mines/2006 Nissan Titan 5.6 SE Texas Edition/2009 370 Base w Sport Pkg

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
For the curious -- My Oil Analysis @ 1000mi	ZzzZz	Engine & Drivetrain	7	04-24-2009 08:09 PM
Curious: who would buy a new RX7?	imag	Nissan 370Z General Discussions	40	04-18-2009 03:49 AM
just curious	bossman	The Lounge (Off Topic)	3	01-18-2009 04:54 AM