Password:JDM wants your feedback! What parts would you like to see us make?

kenchan · 01-03-2012, 12:22 PM

hey any of you guys that bought the knob have issues with the decorative stripe having tiny burrs?

mine was pretty edgy and required me to file.

i hope come spring, i dont un-cover my car to find a rust ring in the middle of the knob.

onzedge · 01-03-2012, 12:33 PM

Quote:

Originally Posted by kenchan

hey any of you guys that bought the knob have issues with the decorative stripe having tiny burrs?

mine was pretty edgy and required me to file.

i hope come spring, i dont un-cover my car to find a rust ring in the middle of the knob.

So, I installed mine before Christmas but today was the first time I actually drove it further than the garage-driveway-garage. Mine feels fine, but cold. I also noticed that the rattle/buzz I was getting at high RPMs (that I was attributing to my short shifter) is gone -- at least for now. Maybe it has something to do with me removing the stock knob and re-stalling the JDM one using rubber o-rings. The knob feels great once it is warmed up.

kenchan · 01-03-2012, 12:38 PM

Quote:

Originally Posted by onzedge

So, I installed mine before Christmas but today was the first time I actually drove it further than the garage-driveway-garage. Mine feels fine, but cold. I also noticed that the rattle/buzz I was getting at high RPMs (that I was attributing to my short shifter) is gone -- at least for now. Maybe it has something to do with me removing the stock knob and re-stalling the JDM one using rubber o-rings. The knob feels great once it is warmed up.

sounds good, mr.onzedge.

i think the weight and size is good too.

it was 12F this am...

i wonder how many people's hands froze to the knob.

kenchan · 01-03-2012, 12:42 PM

mr.onzedge- do you know if stainless is treated after it's cut to prevent corrosion?

Alchemy · 01-03-2012, 12:43 PM

Yeah, my knob has zero imperfections. Def a bit cold in the morn, onzedge.

onzedge · 01-03-2012, 12:44 PM

Quote:

Originally Posted by kenchan

mr.onzedge- do you know if stainless is treated after it's cut to prevent corrosion?

I do not think that stainless steel needs to be treated, but I am a layman and only know enough about machining to make me dangerous. I would ask the PWJDM guys.

12F today? Shrinkage weather.

GaleForce · 01-03-2012, 12:45 PM

Quote:

Originally Posted by kenchan

sounds good, mr.onzedge.

i think the weight and size is good too.

it was 12F this am...

i wonder how many people's hands froze to the knob.

Basically the same temp here (-13°C without the windchill) Although just looking outside you would think its a beautiful spring day until you open the garage door and that winter wind smacks you square in the face back to reality.

Alchemy · 01-03-2012, 12:47 PM

Quote:

Originally Posted by onzedge

I do not think that stainless steel needs to be treated, but I am a layman and only know enough about machining to make me dangerous. I would ask the PWJDM guys.

12F today? Shrinkage weather.

Lol @ shrinkage weather

GaleForce · 01-03-2012, 12:47 PM

Quote:

Originally Posted by kenchan

mr.onzedge- do you know if stainless is treated after it's cut to prevent corrosion?

Here is some reading for those who might be interested in Stainless Steel Stainless steel - Wikipedia, the free encyclopedia

kenchan · 01-03-2012, 12:49 PM

Quote:

Originally Posted by Alchemy

Yeah, my knob has zero imperfections. Def a bit cold in the morn, onzedge.

jk

Quote:

Originally Posted by onzedge

I do not think that stainless steel needs to be treated, but I am a layman and only know enough about machining to make me dangerous. I would ask the PWJDM guys.

12F today? Shrinkage weather.

yah i dont think so either as exhaust flanges are welded and stuff and i dont recall seeing process to be treated. but not sure which T-stainless used.

shrinkage indeed.

Quote:

Originally Posted by GaleForce

Basically the same temp here (-13°C without the windchill) Although just looking outside you would think its a beautiful spring day until you open the garage door and that winter wind smacks you square in the face back to reality.

hahahaha, yah, beautiful warm looking day = COLD!

kenchan · 01-03-2012, 12:51 PM

Quote:

Originally Posted by GaleForce

Here is some reading for those who might be interested in Stainless Steel Stainless steel - Wikipedia, the free encyclopedia

thanks, i actually read that too a week or so ago.

onzedge · 01-03-2012, 01:01 PM

I have never seen a rusted DeLorean if that helps.

kenchan · 01-03-2012, 01:42 PM

Quote:

Originally Posted by onzedge

I have never seen a rusted DeLorean if that helps.

GaleForce · 01-03-2012, 01:43 PM

Quote:

Originally Posted by kenchan

thanks, i actually read that too a week or so ago.

great minds....

GaleForce · 01-03-2012, 01:44 PM

Quote:

Originally Posted by onzedge

I have never seen a rusted DeLorean if that helps.

Hmm, when was the last time anyone has seen a DeLorean?

01-03-2012, 12:43 PM	#905 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 44 Posts: 4,855 Drives: to acquire tickets Rep Power: 3524	Yeah, my knob has zero imperfections. Def a bit cold in the morn, onzedge. __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL

01-03-2012, 01:01 PM	#912 (permalink)
onzedge A True Z Fanatic Join Date: Apr 2010 Location: Battle Lake MN Age: 64 Posts: 183,964 Drives: 370Z 240Z Rep Power: 2684736	I have never seen a rusted DeLorean if that helps. __________________ Koni\|Swift\|Michelin\|Motordyne\|Berk\|RJM Performance\|Gates\|SPL\|Motul\|Technafit\|Ate Super Blue\|Hawk Tommy Kaira\|Momo\|Optima\|Hella\|Hotchkis\|Red Line\|ZSpeed\|Stillen\|B&M\|H&R

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] 350z parts for sale CHEAP! culd b used on 370z some parts	bigpapapump	Parts for sale (Private Classifieds)	2	07-17-2011 02:09 AM
WTB: Password JDM Shift Knob	M.Bonanni	Wanted	2	10-19-2010 11:19 PM
Password: JDM shift knob, feedback?	Red370	Nissan 370Z General Discussions	3	12-26-2009 08:56 PM
Anyone ordered from Password: JDM before?	Red370	Nissan 370Z General Discussions	15	12-23-2009 06:00 PM

01-03-2012, 12:22 PM	#901 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	hey any of you guys that bought the knob have issues with the decorative stripe having tiny burrs? mine was pretty edgy and required me to file. i hope come spring, i dont un-cover my car to find a rust ring in the middle of the knob.

01-03-2012, 12:42 PM	#904 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	mr.onzedge- do you know if stainless is treated after it's cut to prevent corrosion?