Password:JDM wants your feedback! What parts would you like to see us make?

Alchemy · 12-16-2011, 03:14 PM

Ok, Im sitting in my Z and removing the knob was a cake walk. Took about 2 min. Im currently looking at this spacer, about to remove it. Boy the camera on my Droid impresses me.

FairladyZ10PG · 12-16-2011, 03:15 PM

Yes I have removed the spacer before the install. I will try the o ring option but I feel like I shouldn't have to use the o rings to have proper fit. I feel like I have a flawed piece. Is this the issue with everyone else?

happytheman · 12-16-2011, 03:15 PM

@Alchemy - Man, look at you! All up in that with yer MF towel, vice grips and strap wrench! Awesome!

kenchan · 12-16-2011, 03:17 PM

Quote:

Originally Posted by happytheman

@Alchemy - Man, look at you! All up in that with yer MF towel, vice grips and strap wrench! Awesome!

not only that he got that stock one off in 2min with no damage!

he's definitely a pro.

PasswordJDM · 12-16-2011, 03:18 PM

Quote:

Originally Posted by FairladyZ10PG

Yes I have removed the spacer before the install. I will try the o ring option but I feel like I shouldn't have to use the o rings to have proper fit. I feel like I have a flawed piece. Is this the issue with everyone else?

If you feel that you have received a defective piece, we can most definitely replace it with another one. We have installed a dozen of our knobs on the shop car and cannot replicate the problem you are having.

PasswordJDM · 12-16-2011, 03:19 PM

Quote:

Originally Posted by Alchemy

Ok, Im sitting in my Z and removing the knob was a cake walk. Took about 2 min. Im currently looking at this spacer, about to remove it. Boy my the camera on my Droid impresses me.

Let's see some installed shots!!!

Alchemy · 12-16-2011, 03:22 PM

Quote:

Originally Posted by kenchan

not only that he got that stock one off in 2min with no damage!

he's definitely a pro.

The strap wrench demolished it with EASE

Now down to the bottom of the driveway to check the mail for the 5th time today. The guys working on my neighbors roof must think Im nuts.

Alchemy · 12-16-2011, 03:23 PM

Quote:

Originally Posted by PasswordJDM

Let's see some installed shots!!!

Mail has not arrived yet..... SOON!!!

FairladyZ10PG · 12-16-2011, 03:24 PM

Quote:

Originally Posted by PasswordJDM

If you feel that you have received a defective piece, we can most definitely replace it with another one. We have installed a dozen of our knobs on the shop car and cannot replicate the problem you are having.

If this issue is not common with everyone else than I would like to receive a new piece. I also noticed that when I install the knob all the way down the logo is upside down and I cannot torque it down any further. And when I place the logo to face the right way the knob is completely loose.

Alchemy · 12-16-2011, 03:24 PM

Quote:

Originally Posted by warren_uno

just want to ask,does anyone know where to buy an exhaust magnaflow,2nd hand will do here philippines ortigas..tnx

Alchemy · 12-16-2011, 03:25 PM

Quote:

Originally Posted by FairladyZ10PG

If this issue is not common with everyone else than I would like to receive a new piece. I also noticed that when I install the knob all the way down the logo is upside down and I cannot torque it down any further. And when I place the logo to face the right way the knob is completely loose.

One word, LOCTITE.

happytheman · 12-16-2011, 03:26 PM

Quote:

Originally Posted by warren_uno

just want to ask,does anyone know where to buy an exhaust magnaflow,2nd hand will do here philippines ortigas..tnx

Open a WTB (Wanted to Buy) thread here:

Parts for sale (Private Classifieds) - Nissan 370Z Forum

PasswordJDM · 12-16-2011, 03:28 PM

Quote:

Originally Posted by FairladyZ10PG

If this issue is not common with everyone else than I would like to receive a new piece. I also noticed that when I install the knob all the way down the logo is upside down and I cannot torque it down any further. And when I place the logo to face the right way the knob is completely loose.

That is what the included loctite is for.

Quote:

Originally Posted by kenchan

wow, PWJDM included that? very nice of them.

470g imho should be perfect for our cars.

apply a decent amount of loctite on the shifter's threads on one side (dont need to put a huge amount), thread in the knob, get the pattern to your preferred angle, and let it dry over night. should work just fine.

i like my shift pattern slightly facing the driver side.

kenchan · 12-16-2011, 03:31 PM

yep, loctite will fix that. if you want to physically torque it down you can add spacers on the shaft side to get it pretty close and let the loctite do the rest, etc.

there's ways around this.

kenchan · 12-16-2011, 03:34 PM

alchemy- while you have the boot loose can you take a pict of the ring inside the boot how it's mounted to the tip of the boot? i want to shave some of the plastic off or replace with another conal spacer to rid the step between the knob trim and the slope of the boot. (no mt fuji look)

12-16-2011, 03:14 PM	#631 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 45 Posts: 4,855 Drives: to acquire tickets Rep Power: 3524	Ok, Im sitting in my Z and removing the knob was a cake walk. Took about 2 min. Im currently looking at this spacer, about to remove it. Boy the camera on my Droid impresses me. __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL Last edited by Alchemy; 12-16-2011 at 03:19 PM.

12-16-2011, 03:15 PM	#632 (permalink)
FairladyZ10PG A True Z Fanatic Join Date: Aug 2010 Location: SoCal-IE Posts: 1,890 Drives: PGraphite m6 Rep Power: 255	Yes I have removed the spacer before the install. I will try the o ring option but I feel like I shouldn't have to use the o rings to have proper fit. I feel like I have a flawed piece. Is this the issue with everyone else? __________________ ///MPPSK///M Performance FRONT SPLITTER///M Performance KIDNEY GRILLS///MPerformance CF MIRRORS///MPerformance CF SPOILER///AC SCHNITZER

12-16-2011, 03:15 PM	#633 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	@Alchemy - Man, look at you! All up in that with yer MF towel, vice grips and strap wrench! Awesome! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] 350z parts for sale CHEAP! culd b used on 370z some parts	bigpapapump	Parts for sale (Private Classifieds)	2	07-17-2011 02:09 AM
WTB: Password JDM Shift Knob	M.Bonanni	Wanted	2	10-19-2010 11:19 PM
Password: JDM shift knob, feedback?	Red370	Nissan 370Z General Discussions	3	12-26-2009 08:56 PM
Anyone ordered from Password: JDM before?	Red370	Nissan 370Z General Discussions	15	12-23-2009 06:00 PM

12-16-2011, 03:31 PM	#644 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	yep, loctite will fix that. if you want to physically torque it down you can add spacers on the shaft side to get it pretty close and let the loctite do the rest, etc. there's ways around this.

12-16-2011, 03:34 PM	#645 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	alchemy- while you have the boot loose can you take a pict of the ring inside the boot how it's mounted to the tip of the boot? i want to shave some of the plastic off or replace with another conal spacer to rid the step between the knob trim and the slope of the boot. (no mt fuji look)