Password:JDM wants your feedback! What parts would you like to see us make?

ZForce · 12-16-2011, 09:38 AM

Quote:

Originally Posted by christian370z

....... I can't believe these are so cheap because they look much more expensive:

Pssssst....don't give them any ideas. At least not until I order mine.

Alchemy · 12-16-2011, 09:55 AM

I will have mine today

Going to check if its been delivered already in a sec. Tomorrow is my birthday, this is a great present

I cant wait to install it!!!

kenchan · 12-16-2011, 10:27 AM

hey, happy early b-day alchemy!

happytheman · 12-16-2011, 10:49 AM

Happy Happy! Joy Joy, Mr. Alchemy!

Awwwwriiiiggghhhhhttt!! It looks like I'm going to get mine today!

PasswordJDM · 12-16-2011, 12:22 PM

Quote:

Originally Posted by FairladyZ10PG

I've tried installing the new shift knob but ran into a problem. It appears that it will not go all the way down. There is about a 1/4 inch gap between the knob and the shift boot. I'm assuming I may have received a bad shift knob as I've also noticed a lot of loose metal shavings inside the knob when I received it. I will contact PWJDM and see if they can solve this.

Hey Mark,

We just sent you a PM to try and solve this issue.

Here is what we sent you just incase anyone else runs into an issue.

-----------------------------------------------------------------------------

Under the stock shift knob there is a small aluminum spacer around the actual shifter. This should be removed prior to installing the Password:JDM shift knob.

kenchan · 12-16-2011, 12:38 PM

"-----------------------------------------------------------------------------"

Alchemy · 12-16-2011, 12:55 PM

Quote:

Originally Posted by kenchan

hey, happy early b-day alchemy!

Quote:

Originally Posted by happytheman

Happy Happy! Joy Joy, Mr. Alchemy!

Awwwwriiiiggghhhhhttt!! It looks like I'm going to get mine today!

Still waiting on my knob. Its been out for delivery since 9:30 am. Wow its amazing how you can track a package these days, I love it. While Ive been waiting for the delivery I ran to work and grabbed a strap wrench to make short work of the stock shift knob

kenchan · 12-16-2011, 12:58 PM

Quote:

Originally Posted by Alchemy

Still waiting on my knob. Its been out for delivery since 9:30 am. Wow its amazing how you can track a package these days, I love it. While Ive been waiting for the delivery I ran to work and grabbed a strap wrench to make short work of the stock shift knob

oh that strap is going to break.

(per my experience).

Alchemy · 12-16-2011, 01:02 PM

Quote:

Originally Posted by kenchan

oh that strap is going to break.

(per my experience).

Idk, its gotta be almost a half inch thick. Is the stock knob on that good???

kenchan · 12-16-2011, 01:10 PM

Quote:

Originally Posted by Alchemy

Idk, its gotta be almost a half inch thick. Is the stock knob on that good???

mine was. i used the blue one sold at Sears. the strap snapped when i meant business.

(2 tries and snap...).

happytheman · 12-16-2011, 01:20 PM

Quote:

Originally Posted by PasswordJDM

Hey Mark,

We just sent you a PM to try and solve this issue.

Here is what we sent you just incase anyone else runs into an issue.

-----------------------------------------------------------------------------

Under the stock shift knob there is a small aluminum spacer around the actual shifter. This should be removed prior to installing the Password:JDM shift knob.

Wha?

I don't recall seeing an aluminum spacer...??

kenchan · 12-16-2011, 01:25 PM

Alchemy- btw, when you do remove the stock knob, make sure to hold the shaft with vicegrips. the torque you put on the knob can potentially damage the linkage below. and dont forget to put a towel or something under the vice grips not to scratch the center console.

Alchemy · 12-16-2011, 01:33 PM

Quote:

Originally Posted by kenchan

Alchemy- btw, when you do remove the stock knob, make sure to hold the shaft with vicegrips. the torque you put on the knob can potentially damage the linkage below. and dont forget to put a towel or something under the vice grips not to scratch the center console.

What about the boot though?? You vice gripped the shaft w the boot still on??

kenchan · 12-16-2011, 01:34 PM

Quote:

Originally Posted by Alchemy

What about the boot though?? You vice gripped the shaft w the boot still on??

just pull up the boot/shifter ring assembly. you dont need tools for pulling this up, just grab the aft portion of the boot and ring (just dig fingers into the boot and grab under the ring) and pull up.

kenchan · 12-16-2011, 01:35 PM

btw, that shifter ring has metal clips which will scratch the center console so make sure you put towels under there as well. or do like me, painter's tape the area of the console (couple of layers to make it thick).

12-16-2011, 09:55 AM	#602 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 44 Posts: 4,855 Drives: to acquire tickets Rep Power: 3524	I will have mine today Going to check if its been delivered already in a sec. Tomorrow is my birthday, this is a great present I cant wait to install it!!! __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL Last edited by Alchemy; 12-16-2011 at 09:59 AM.

12-16-2011, 10:49 AM	#604 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Happy Happy! Joy Joy, Mr. Alchemy! Awwwwriiiiggghhhhhttt!! It looks like I'm going to get mine today! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub Last edited by happytheman; 12-16-2011 at 11:10 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] 350z parts for sale CHEAP! culd b used on 370z some parts	bigpapapump	Parts for sale (Private Classifieds)	2	07-17-2011 01:09 AM
WTB: Password JDM Shift Knob	M.Bonanni	Wanted	2	10-19-2010 10:19 PM
Password: JDM shift knob, feedback?	Red370	Nissan 370Z General Discussions	3	12-26-2009 07:56 PM
Anyone ordered from Password: JDM before?	Red370	Nissan 370Z General Discussions	15	12-23-2009 05:00 PM

12-16-2011, 10:27 AM	#603 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	hey, happy early b-day alchemy!

12-16-2011, 12:38 PM	#606 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	"-----------------------------------------------------------------------------"

12-16-2011, 01:25 PM	#612 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Alchemy- btw, when you do remove the stock knob, make sure to hold the shaft with vicegrips. the torque you put on the knob can potentially damage the linkage below. and dont forget to put a towel or something under the vice grips not to scratch the center console.

12-16-2011, 01:35 PM	#615 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	btw, that shifter ring has metal clips which will scratch the center console so make sure you put towels under there as well. or do like me, painter's tape the area of the console (couple of layers to make it thick).