Password:JDM wants your feedback! What parts would you like to see us make?

kenchan · 12-27-2011, 10:29 AM

PWJDM- here's mine.

i used a plastic spacer i had in my parts bin to raise the boot.

i had one issue which you might be able to revise. the decorative stripe had very tiny burrs on mine and it was enough to shred my suede glove a little bit during the test drive.

later that night i took my file (and my time not to scratch the brushed area) and smoothed it out.

the weight and size imho is very good.

the mt.fuji look on the boot didnt really look too bad in person so i just left it.

onzedge · 12-27-2011, 10:32 AM

^^^ That looks quite nice, Mr. Kenchan. I look forward to actually trying mine when I get back home from my folks' house here in Long Beach.

Question, though, Suede glove? Nice.

kenchan · 12-27-2011, 10:33 AM

Quote:

Originally Posted by onzedge

^^^ That looks quite nice, Question, though, Suede glove? Nice.

yah, my TEIN work glove has suede on the palm side. i use it as my driving gloves in the winter time.

http://www.extremepsi.com/store/images/t_19028_01.jpg

sfearl1 · 12-27-2011, 12:03 PM

are these in stock? i'm going to be ordering mine soon.

TerribleONE · 12-27-2011, 12:07 PM

Ordered myself a white knob!! cant wait to throw it on

happytheman · 12-27-2011, 05:39 PM

Quote:

Originally Posted by kenchan

yah, my TEIN work glove has suede on the palm side. i use it as my driving gloves in the winter time.

http://www.extremepsi.com/store/images/t_19028_01.jpg

I was thinking recently about getting a pair of driving gloves so I don't scratch the finish of my new knob, but felt that it might perhaps be a bit too ostentatious!

kenchan · 12-27-2011, 06:51 PM

Quote:

Originally Posted by happytheman

I was thinking recently about getting a pair of driving gloves so I don't scratch the finish of my new knob, but felt that it might perhaps be a bit too ostentatious!

Hahaha. It gets cold here, thus the gloves. In the summer unless I'm sweating in a car with no a/c I don't wear gloves.

. The gloves makes the steering consistent.

TerribleONE · 12-27-2011, 09:56 PM

just installed my knob.. love it however the shift ring will not fit... pwjdm have you ever heard of this? I cannot thread the knob on with the ring in place

Tward · 12-27-2011, 10:01 PM

PWD JDM, anything on the diffuser?

happytheman · 12-27-2011, 10:36 PM

Quote:

Originally Posted by TerribleONE

just installed my knob.. love it however the shift ring will not fit... pwjdm have you ever heard of this? I cannot thread the knob on with the ring in place

Hmm, pics pwease?

Does the shift ring slip on at all, or does it just not slip down far enough to get the knob threaded?

TerribleONE · 12-27-2011, 11:04 PM

I installed the knob without the ring for now I'll snap some pictures tomorrow. It does slip over however not far enough to start threading the knob on

happytheman · 12-27-2011, 11:11 PM

Man that's weird. Sound like a possible manufacturing issue.

TerribleONE · 12-27-2011, 11:26 PM

Thats what I am guessing since it is pretty damn close.. Hopefully they will take care of it..

PasswordJDM · 12-27-2011, 11:33 PM

Quote:

Originally Posted by TerribleONE

Thats what I am guessing since it is pretty damn close.. Hopefully they will take care of it..

Did you remove the aluminum spacer that was under the stock shift knob?

happytheman · 12-28-2011, 06:23 AM

I didn't have to remove my aluminum spacer. Everything slid together with ease and tightened down perfectly, just like it was waiting to come home!

12-27-2011, 10:32 AM	#872 (permalink)
onzedge A True Z Fanatic Join Date: Apr 2010 Location: Battle Lake MN Age: 63 Posts: 183,964 Drives: 370Z 240Z Rep Power: 2684736	^^^ That looks quite nice, Mr. Kenchan. I look forward to actually trying mine when I get back home from my folks' house here in Long Beach. Question, though, Suede glove? Nice. __________________ Koni\|Swift\|Michelin\|Motordyne\|Berk\|RJM Performance\|Gates\|SPL\|Motul\|Technafit\|Ate Super Blue\|Hawk Tommy Kaira\|Momo\|Optima\|Hella\|Hotchkis\|Red Line\|ZSpeed\|Stillen\|B&M\|H&R

12-27-2011, 10:01 PM	#879 (permalink)
Tward Enthusiast Member Join Date: Feb 2011 Location: North Little Rock, AR Posts: 318 Drives: 09 Nissan 370z BS M6 Rep Power: 14	PWD JDM, anything on the diffuser? __________________ Nismo S - Tune Body Kit/ UAM Fenders / Fast Intentions CBE 12/ Stillen CAI/ PWD JDM Shift Knob/BlueBat Vinyl' R.I.P Garrett Uekman

12-27-2011, 11:04 PM	#881 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	I installed the knob without the ring for now I'll snap some pictures tomorrow. It does slip over however not far enough to start threading the knob on Last edited by TerribleONE; 12-27-2011 at 11:08 PM.

12-27-2011, 11:11 PM	#882 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Man that's weird. Sound like a possible manufacturing issue. __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

12-28-2011, 06:23 AM	#885 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	I didn't have to remove my aluminum spacer. Everything slid together with ease and tightened down perfectly, just like it was waiting to come home! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

12-27-2011, 10:29 AM	#871 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	PWJDM- here's mine. i used a plastic spacer i had in my parts bin to raise the boot. i had one issue which you might be able to revise. the decorative stripe had very tiny burrs on mine and it was enough to shred my suede glove a little bit during the test drive. later that night i took my file (and my time not to scratch the brushed area) and smoothed it out. the weight and size imho is very good. the mt.fuji look on the boot didnt really look too bad in person so i just left it.

12-27-2011, 12:03 PM	#874 (permalink)
sfearl1 A True Z Fanatic Join Date: Oct 2011 Location: St. Louis Posts: 2,300 Drives: 2013 FBO E85 GTR Rep Power: 17	are these in stock? i'm going to be ordering mine soon.

12-27-2011, 12:07 PM	#875 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	Ordered myself a white knob!! cant wait to throw it on

12-27-2011, 09:56 PM	#878 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	just installed my knob.. love it however the shift ring will not fit... pwjdm have you ever heard of this? I cannot thread the knob on with the ring in place

12-27-2011, 11:26 PM	#883 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	Thats what I am guessing since it is pretty damn close.. Hopefully they will take care of it..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] 350z parts for sale CHEAP! culd b used on 370z some parts	bigpapapump	Parts for sale (Private Classifieds)	2	07-17-2011 01:09 AM
WTB: Password JDM Shift Knob	M.Bonanni	Wanted	2	10-19-2010 10:19 PM
Password: JDM shift knob, feedback?	Red370	Nissan 370Z General Discussions	3	12-26-2009 07:56 PM
Anyone ordered from Password: JDM before?	Red370	Nissan 370Z General Discussions	15	12-23-2009 05:00 PM