S mode

zfive · 10-28-2011, 08:18 PM

The same thing happened to mine when I installed my HU. I removed the silver plastic ring that goes around the shift knob (per the HU install instructions I found on the forum; btw, this ring didn't need to be removed for an HU install), and when I put it back on, it didn't go on properly. It was a little crooked which prevented the s-button from getting pressed all the way in. So, check that silver ring -- remove it and put it back on again. The s-button should click when you press it all the way down. If it doesn't, it probably means it's not getting pressed all the way in.

NismoZ370 · 10-28-2011, 09:35 PM

Thanks, ill try it out now.

EazyD · 10-28-2011, 10:45 PM

Quote:

Originally Posted by kenchan

and remember the gear needs to be in neutral.

No it doesn't?

svmtbman · 10-28-2011, 11:00 PM

Quote:

Originally Posted by EazyD

No it doesn't?

+1

roplusbee · 10-29-2011, 06:13 PM

Same thing happened to me when I got my head unit and speakers installed. Sad part is that I had to reverse engineer what they did and unfuck the whole installation. The dealer ended up replacing both window sensors and motors on warranty as a result of the shop's "installation". Just check that the button isn't actually damaged or obstructed in some way. I learned that while correctly installing my sound system. And I actually paid those guys.............sad.

kellyefields · 10-29-2011, 09:55 PM

you may want to disconnect the battery for a few minutes and then hook it back up. I betcha you need to reset the computer.

kenchan · 10-30-2011, 10:29 PM

Quote:

Originally Posted by EazyD

No it doesn't?

Yah werd. I tried just holding down the button 3 sec this am in 3rd and it worked. I could've sworn I read it somewhere it had to be in neutral. Hummmmm...

EazyD · 10-31-2011, 06:12 PM

Quote:

Originally Posted by kenchan

Yah werd. I tried just holding down the button 3 sec this am in 3rd and it worked. I could've sworn I read it somewhere it had to be in neutral. Hummmmm...

did I.......teach Mr. Kenchan something....
ACHIEVEMENT UNLOCKED

only took me 15 months!

kenchan · 11-01-2011, 12:01 PM

haha, i LOL'ed at your location: Massa2shits.

fuct · 11-01-2011, 03:46 PM

negative rep for kenchan.... boo this man!

jk

kenchan · 11-01-2011, 03:47 PM

Quote:

Originally Posted by fuct

negative rep for kenchan.... boo this man!

jk

hahahaha.

EazyD · 11-02-2011, 01:53 AM

Quote:

Originally Posted by kenchan

haha, i LOL'ed at your location: Massa2shits.

NismoZ370 · 11-05-2011, 04:21 PM

Installed the GTR push start today and while having everything apart fanagled the bezel and walla it works thanks guys!

10-28-2011, 08:18 PM	#16 (permalink)
zfive Base Member Join Date: Jun 2011 Location: Morgan Hill, CA Posts: 32 Drives: 11 370Z Nismo Rep Power: 14	Check the silver ring around the shift knob The same thing happened to mine when I installed my HU. I removed the silver plastic ring that goes around the shift knob (per the HU install instructions I found on the forum; btw, this ring didn't need to be removed for an HU install), and when I put it back on, it didn't go on properly. It was a little crooked which prevented the s-button from getting pressed all the way in. So, check that silver ring -- remove it and put it back on again. The s-button should click when you press it all the way down. If it doesn't, it probably means it's not getting pressed all the way in.

10-29-2011, 06:13 PM	#20 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 23	Same thing happened to me when I got my head unit and speakers installed. Sad part is that I had to reverse engineer what they did and unfuck the whole installation. The dealer ended up replacing both window sensors and motors on warranty as a result of the shop's "installation". Just check that the button isn't actually damaged or obstructed in some way. I learned that while correctly installing my sound system. And I actually paid those guys.............sad. __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

10-29-2011, 09:55 PM	#21 (permalink)
kellyefields A True Z Fanatic Join Date: Nov 2010 Location: Lexington Ky #BBN Age: 48 Posts: 1,156 Drives: Supercharged Rep Power: 17	you may want to disconnect the battery for a few minutes and then hook it back up. I betcha you need to reset the computer. __________________ MY 2009 SC BUILD.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
s-mode	sojirovskensi	Nissan 370Z General Discussions	10	12-16-2010 03:08 PM
S mode	mcm9138	Engine & Drivetrain	17	07-04-2010 07:25 PM
Any harm to switching from auto mode 'D' to manual mode and back while driving?	Lee123	Engine & Drivetrain	14	05-19-2010 08:10 PM
On to ACC mode	theDreamer	Nissan 370Z General Discussions	6	02-02-2010 05:47 PM
A/C mode	FricFrac	Nissan 370Z General Discussions	12	07-17-2009 07:19 PM

10-28-2011, 09:35 PM	#17 (permalink)
NismoZ370 Track Member Join Date: Nov 2010 Location: Clarksville, TN Posts: 711 Drives: a GTR soon! Rep Power: 16	Thanks, ill try it out now.

11-01-2011, 12:01 PM	#24 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	haha, i LOL'ed at your location: Massa2shits.

11-01-2011, 03:46 PM	#25 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	negative rep for kenchan.... boo this man! jk

11-05-2011, 04:21 PM	#28 (permalink)
NismoZ370 Track Member Join Date: Nov 2010 Location: Clarksville, TN Posts: 711 Drives: a GTR soon! Rep Power: 16	Installed the GTR push start today and while having everything apart fanagled the bezel and walla it works thanks guys!