370z Clear Bra?

Roadster4Us · 12-03-2012, 10:26 PM

Quote:

Originally Posted by Jeff La Force

I have a 2011, and I recently repainted the front . . . I have heard some discussion of a clear bra. Is it worth the investment? Do they look OK?

A lot of answers in your post from yesterday on this subject.
http://www.the370z.com/nissan-370z-g...bra-worth.html

frost · 12-03-2012, 10:33 PM

Quote:

Originally Posted by Roadster4Us

A lot of answers in your post from yesterday on this subject.
http://www.the370z.com/nissan-370z-g...bra-worth.html

I just merged the two threads Jeff made into a pre-existing thread.

Menace370Z · 02-27-2013, 06:46 PM

Just finished reading the thread. Did anyone ever find a good place in SF/San Jose Bay Area?

Picking up my new Z on Friday

Kreep · 04-11-2013, 12:39 AM

On a related note, anyone know if you can take the scuff marks out of the clear protection? Came home and noticed someone rubbed against my car when they were parking I assume.

Roadster4Us · 04-11-2013, 07:20 AM

Quote:

Originally Posted by Kreep

On a related note, anyone know if you can take the scuff marks out of the clear protection? Came home and noticed someone rubbed against my car when they were parking I assume.

Here is an older thread on the subject with some information. However it's probably best to contact the manufacturer of your clear bra and get guidance from them since there are some different types.

Odd marks in clear bra

ZoomZ · 04-23-2017, 01:18 PM

is it safe to say a kit for 2016 NISMO will fit 2017 NISMO ?

kenchan · 04-23-2017, 01:52 PM

they are both the same facia, right? if so, im pretty sure they will fit.

ZoomZ · 04-24-2017, 11:45 AM

Quote:

Originally Posted by kenchan

they are both the same facia, right? if so, im pretty sure they will fit.

I'm Guessing, but you never know. I was hoping the wiser would prove us wrong.

kenchan · 04-25-2017, 07:30 AM

u can always trim clearbra if ure dat worried. hope u dont get a chip while ure thinking dis over.

ZoomZ · 04-26-2017, 01:46 PM

Quote:

Originally Posted by kenchan

u can always trim clearbra if ure dat worried. hope u dont get a chip while ure thinking dis over.

Every time I drive, not a second goes by without me cringing at the thought! (LOL)

Ordering parts and getting appointment times are out of my control. I wish I had found the right guy earlier, but as you know, finding the right people is hard.

So, I continue to cringe!

kenchan · 04-26-2017, 02:11 PM

Just buy da precut and install it urself. 3-4 hrs is all it takes.

Nixin · 04-26-2017, 03:55 PM

Get the clear bra, it's worth every $.

markesc · 04-26-2017, 08:15 PM

Agreed! Paid $1400 (too much I know) for the front bumper, entire hood, mirrors, and window tint all around.... if you don't then you have to stare at rock chips each/every time you wash/wax the thing for the rest of the time you own it.

Recently I had a trucker hauling doubles cross over into my lane just ahead of me while I was gunning it to pass around 'em as quickly as possible. That day ODOT happened to have been pressure washing the areas along the concrete barriers to allow for water runoff. So there was a ton of this red pumice **** along the broken white stripes.... BAM, hole car was sandblasted!!! Luckily I think I only picked up maybe 1-2 very minor chips, but it could have been much much worse.

The other thing to consider: If you love following people close/drive aggressively = even more rock chips.

kenchan · 04-27-2017, 07:41 AM

for all dat i dont think dats a bad deal. especially if u had the shop use good film and tint.

ZoomZ · 04-27-2017, 01:12 PM

Quote:

Originally Posted by markesc

Agreed! Paid $1400 (too much I know) for the front bumper, entire hood, mirrors, and window tint all around.... if you don't then you have to stare at rock chips each/every time you wash/wax the thing for the rest of the time you own it.

Recently I had a trucker hauling doubles cross over into my lane just ahead of me while I was gunning it to pass around 'em as quickly as possible. That day ODOT happened to have been pressure washing the areas along the concrete barriers to allow for water runoff. So there was a ton of this red pumice **** along the broken white stripes.... BAM, hole car was sandblasted!!! Luckily I think I only picked up maybe 1-2 very minor chips, but it could have been much much worse.

The other thing to consider: If you love following people close/drive aggressively = even more rock chips.

It's gonna cost me the same, except I'm in Canada, so add extra $500 cdn! It's 3M stuff and experienced guy. (from reviews and me asking around)

Except I'm also getting fenders, a-pillars and headlights for that price. ($1900 Cdn or roughly $1500 USD)

04-25-2017, 07:30 AM	#69 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	u can always trim clearbra if ure dat worried. hope u dont get a chip while ure thinking dis over. ZoomZ likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
clear bras are sheets of clear laminate film?	elm_tx	Exterior & Interior	9	08-25-2010 09:46 AM
CLEAR 370z!	white92	Nissan 370Z General Discussions	18	04-27-2010 05:24 PM
370Z Clear Bra	Educ8r	Nissan 370Z General Discussions	23	03-06-2009 11:12 AM

02-27-2013, 06:46 PM	#63 (permalink)
Menace370Z Base Member Join Date: Aug 2012 Location: Sunnyvale Posts: 24 Drives: '13 370Z MB MT Rep Power: 13	Just finished reading the thread. Did anyone ever find a good place in SF/San Jose Bay Area? Picking up my new Z on Friday

04-11-2013, 12:39 AM	#64 (permalink)
Kreep Base Member Join Date: Nov 2011 Location: Vancouver Age: 49 Posts: 30 Drives: 2009 370Zed Sprt Tr Rep Power: 14	On a related note, anyone know if you can take the scuff marks out of the clear protection? Came home and noticed someone rubbed against my car when they were parking I assume.

04-23-2017, 01:18 PM	#66 (permalink)
ZoomZ Track Member Join Date: Jan 2017 Location: Vancouver, BC Posts: 760 Drives: 17' 370Z Nismo Rep Power: 40617	is it safe to say a kit for 2016 NISMO will fit 2017 NISMO ?

04-23-2017, 01:52 PM	#67 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	they are both the same facia, right? if so, im pretty sure they will fit.

04-26-2017, 02:11 PM	#71 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Just buy da precut and install it urself. 3-4 hrs is all it takes.

04-26-2017, 03:55 PM	#72 (permalink)
Nixin A True Z Fanatic Join Date: Sep 2015 Location: GWN Posts: 3,488 Drives: Goodbye Z! Rep Power: 19833	Get the clear bra, it's worth every $.

04-26-2017, 08:15 PM	#73 (permalink)
markesc Enthusiast Member Join Date: Apr 2014 Location: Utah Posts: 380 Drives: 2014 370z M.B. 7AT Rep Power: 3366	Agreed! Paid $1400 (too much I know) for the front bumper, entire hood, mirrors, and window tint all around.... if you don't then you have to stare at rock chips each/every time you wash/wax the thing for the rest of the time you own it. Recently I had a trucker hauling doubles cross over into my lane just ahead of me while I was gunning it to pass around 'em as quickly as possible. That day ODOT happened to have been pressure washing the areas along the concrete barriers to allow for water runoff. So there was a ton of this red pumice **** along the broken white stripes.... BAM, hole car was sandblasted!!! Luckily I think I only picked up maybe 1-2 very minor chips, but it could have been much much worse. The other thing to consider: If you love following people close/drive aggressively = even more rock chips.

04-27-2017, 07:41 AM	#74 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	for all dat i dont think dats a bad deal. especially if u had the shop use good film and tint.