2012s on lots....where are the oil coolers?

'10Anamoly · 10-18-2011, 03:31 PM

By plumbing, they probably mean the coolant lines. I am pretty sure we can make it work, despite that. I seriously doubt that Nissan changed internal plumbing on the block to avoid retrofits.

'10Anamoly · 10-18-2011, 03:34 PM

Ladies and gentleman, below I give you... the 2012 Nissan 370Z OEM water-to-oil cooler. Sorry for the dark picture, but this is from a dealer who was nice enough to put a 2012 Z on the lift and snap the pic.

2012 Nissan Z Oil Cooler part #21300-SS370

2012 Nissan Z Chassis Brake Cooling Kit part #E4420-1EA00

Red__Zed · 10-18-2011, 03:37 PM

Quote:

Originally Posted by UNKNOWN_370

I checked on that... Nissan is already saying no retrofit on the previous Z. They said they changed the plumbing on the Z so they won't retrofit the part. As for adding your own they didn't mention.

I'm getting the GTM oil cooler anyway but for those that were hoping for a nissan retrofit? Forget about. I think they are afraid that if they retrofit? They will have to warranty the product and don't want to. I see nissan going the toyota route with hybrids and the Z being electric and the END OF NISMO. The poser car of tomorrow. Lol. Anyway, get your Z's while they still have a name.

Who at Nissan did you talk to?

Red__Zed · 10-18-2011, 03:38 PM

Quote:

Originally Posted by '10Anamoly

Ladies and gentleman, below I give you... the 2012 Nissan 370Z OEM water-to-oil cooler. Sorry for the dark picture, but this is from a dealer who was nice enough to put a 2012 Z on the lift and snap the pic.

2012 Nissan Z Oil Cooler part #21300-SS370

2012 Nissan Z Chassis Brake Cooling Kit part #E4420-1EA00

Itoldyousodance.gif

Repped for coming thru!

onzedge · 10-18-2011, 03:39 PM

Rep for snagging the picture. Does this look kind of cheesy though?

theDreamer · 10-18-2011, 03:40 PM

Quote:

Originally Posted by onzedge

Rep for snagging the picture. Does this look kind of cheesy though?

Cheap, easily fixed/repairable and they get to say the words 'oil cooler.'

Red__Zed · 10-18-2011, 03:42 PM

Quote:

Originally Posted by onzedge

Rep for snagging the picture. Does this look kind of cheesy though?

Plus side is you are not running oil all over the place. That's a bad idea on a street car.

'10Anamoly · 10-18-2011, 03:42 PM

Thanks for the reps! It's the same solution they use on the majority of cars that need oil cooling so I guess we should not be surprised. I believe most of the larger vehicles in their fleet have similar items. I also did not want my oil running all around the place so I am glad to have another option to explore.

Deadman · 10-18-2011, 03:44 PM

How well does it work now ? Lol

'10Anamoly · 10-18-2011, 03:46 PM

Our cooling system is pretty robust, thermostat opens at 180*F, cooling fans kick on at 212*F and off around 200*F, so the water temp control should contribute to cooling the oil some. Nothing like an aftermarket air cooling setup, but I doubt they would take the time to add it and not test to make sure it did something.

Red__Zed · 10-18-2011, 03:47 PM

Quote:

Originally Posted by Deadman

How well does it work now ? Lol

Now we wait for track results.

b1adesofcha0s · 10-18-2011, 03:56 PM

Repped for getting the pic. Wonder how well this will work and hoping it can be retrofitted easily. Hoping I can get this for cheap and hold off on getting an aftermarket oil cooler so I can at least get some track time.

wstar · 10-18-2011, 04:00 PM

I'll probably give it a shot (combined with my 19-row setrab + mocal thermo plate) as soon as I can verify the correct water plumbing and the part is available through Nissan parts depts.

onzedge · 10-18-2011, 04:02 PM

Quote:

Originally Posted by UNKNOWN_370

I checked on that... Nissan is already saying no retrofit on the previous Z. They said they changed the plumbing on the Z so they won't retrofit the part. As for adding your own they didn't mention.

I'm getting the GTM oil cooler anyway but for those that were hoping for a nissan retrofit? Forget about. I think they are afraid that if they retrofit? They will have to warranty the product and don't want to. I see nissan going the toyota route with hybrids and the Z being electric and the END OF NISMO. The poser car of tomorrow. Lol. Anyway, get your Z's while they still have a name.

I have been running the GTM oil cooler for a year and a half and I am quite pleased with it -- for what it is worth.

'10Anamoly · 10-18-2011, 04:05 PM

Ignore the part number for the brake cooling parts, the guy misunderstood me and looked up the chassis brace kit (Nismo).

10-18-2011, 03:31 PM	#61 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 17	By plumbing, they probably mean the coolant lines. I am pretty sure we can make it work, despite that. I seriously doubt that Nissan changed internal plumbing on the block to avoid retrofits. __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd

10-18-2011, 03:39 PM	#65 (permalink)
onzedge A True Z Fanatic Join Date: Apr 2010 Location: Battle Lake MN Age: 64 Posts: 183,964 Drives: 370Z 240Z Rep Power: 2684737	Rep for snagging the picture. Does this look kind of cheesy though? __________________ Koni\|Swift\|Michelin\|Motordyne\|Berk\|RJM Performance\|Gates\|SPL\|Motul\|Technafit\|Ate Super Blue\|Hawk Tommy Kaira\|Momo\|Optima\|Hella\|Hotchkis\|Red Line\|ZSpeed\|Stillen\|B&M\|H&R

10-18-2011, 03:42 PM	#68 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 17	Thanks for the reps! It's the same solution they use on the majority of cars that need oil cooling so I guess we should not be surprised. I believe most of the larger vehicles in their fleet have similar items. I also did not want my oil running all around the place so I am glad to have another option to explore. __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd

10-18-2011, 03:46 PM	#70 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 17	Our cooling system is pretty robust, thermostat opens at 180F, cooling fans kick on at 212F and off around 200F, so the water temp control should contribute to cooling the oil some. Nothing like an aftermarket air cooling setup, but I doubt they would take the time to add it and not test to make sure it did something. __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd*

10-18-2011, 03:56 PM	#72 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 142	Repped for getting the pic. Wonder how well this will work and hoping it can be retrofitted easily. Hoping I can get this for cheap and hold off on getting an aftermarket oil cooler so I can at least get some track time. __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

10-18-2011, 03:44 PM	#69 (permalink)
Deadman Base Member Join Date: May 2011 Location: Ohio Posts: 177 Drives: 2011 370z Base+S 6MT Rep Power: 15	How well does it work now ? Lol

10-18-2011, 04:00 PM	#73 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3595	I'll probably give it a shot (combined with my 19-row setrab + mocal thermo plate) as soon as I can verify the correct water plumbing and the part is available through Nissan parts depts. __________________ 7AT Track Car! Journal thread / Car setup details

10-18-2011, 04:05 PM	#75 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 17	Ignore the part number for the brake cooling parts, the guy misunderstood me and looked up the chassis brace kit (Nismo). __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lots more CF parts!!! by CFElement....Lots of pics.	Carbon Fiber Element	Exterior & Interior	2	03-01-2014 03:22 AM
best oil coolers ? help	pyrrhus17	Engine & Drivetrain	29	09-24-2011 07:35 PM
Which are the top oil coolers?	germanattitud	Track / Autocross / Drifting / Dragstrip	26	08-05-2011 11:44 AM
Oil Coolers and Oil changes	Kandy OrangeZ	Engine & Drivetrain	37	06-26-2011 07:36 AM
Oil changes with coolers?	wstar	Engine & Drivetrain	2	04-26-2009 08:07 AM