Help with Aftermarket Steering Wheel Install

karotZ · 08-19-2011, 04:33 PM

Quote:

Originally Posted by kenchan

just pull... pull hard.

pulling hard aside, i got all the basics except which wire goes where? esp. that srs indicator looper / airbag sensor.

kenchan · 08-19-2011, 04:37 PM

for the SRS you should have 2 resistors for them to trick the srs that there is some load.

i believe these airbags are dual stage like the previuos Z and G.

karotZ · 08-19-2011, 04:44 PM

Quote:

Originally Posted by kenchan

for the SRS you should have 2 resistors for them to trick the srs that there is some load.

i believe these airbags are dual stage like the previuos Z and G.

This is which I have no clue how it will insert on the sensors. It looks easy but last thing I want to happen is the srs indicator turned on and wont come off.

kenchan · 08-19-2011, 04:51 PM

it's easy. you just push the resistor pins into the harness female terminals, bend the resistor and tape it to the harness with e-tape. if you're anal you should also put a fuse in series but not necessary. repeat for the other harness.

karotZ · 08-19-2011, 11:18 PM

Anyone got a pic on how the resistors connect?

hdskull · 08-22-2011, 05:10 AM

Did you get this installed yet?

08-19-2011, 11:18 PM	#20 (permalink)
karotZ Track Member Join Date: Dec 2010 Location: not found Posts: 723 Drives: on empty tank of gas Rep Power: 15	Anyone got a pic on how the resistors connect? __________________ VERTEX \| SUIVAX \| AMUSE \| SSR \| SPARCO \| STILLEN \| FAST INTENTIONS x HKS \| HANKOOK \| NARDI \| NRG \| EVO-R \| ROBISPEC \| SPC

08-22-2011, 05:10 AM	#21 (permalink)
hdskull Track Member Join Date: Jun 2009 Location: San Diego Posts: 680 Drives: '10 Black 370Z 6MT Rep Power: 17	Did you get this installed yet? __________________ ^ Kenwood DDX616 \| Polk DB6501 \| Llumar 23% tint \| STi-R Clear Lens SSR Type-F \| F.I. 18" CF \| Stillen Gen 3 \| KW V3

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Non oem steering wheel	zzdudaka	Exterior & Interior	11	05-16-2015 12:23 AM
WTB: OEM Steering wheel	JSD-ZX	Wanted	0	07-23-2010 03:21 AM
Steering Wheel?	The BlueMax	Exterior & Interior	1	02-02-2010 11:24 PM
Steering control vs aftermarket HU	DA_lsvtak	Audio & Video	2	05-01-2009 07:03 PM
Steering Wheel Audio Controls w/ Aftermarket	Ryan	Audio & Video	1	03-29-2009 06:05 PM

08-19-2011, 04:37 PM	#17 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	for the SRS you should have 2 resistors for them to trick the srs that there is some load. i believe these airbags are dual stage like the previuos Z and G.

08-19-2011, 04:51 PM	#19 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	it's easy. you just push the resistor pins into the harness female terminals, bend the resistor and tape it to the harness with e-tape. if you're anal you should also put a fuse in series but not necessary. repeat for the other harness.