Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Nissan 370Z General Discussions (http://www.the370z.com/nissan-370z-general-discussions/)
-   -   Staggered or square setup? (http://www.the370z.com/nissan-370z-general-discussions/39270-staggered-square-setup.html)

b1adesofcha0s 07-09-2011 11:37 PM

Quote:

Originally Posted by Mike (Post 1210886)
factory spec alignment is best for you blades.

Thanks! I'm still a noob when it comes to this stuff, but I'm trying to learn. :tup:

Quote:

Originally Posted by ChrisSlicks (Post 1210905)
It would be nice to push the front camber just a little for a more aggressive street performance (around -1.2) but sadly there is no way to do it without replacement upper control arms. High speed auto-x is great if you can find it locally, helps you learn what the car will do at the limit and makes you more prepared for the track when you get there.

That's the plan. I had planned to go to an AutoX event a few weeks ago, but ended up not going because Steve offered to buy me lunch :bowrofl:

ChrisSlicks 07-10-2011 07:37 AM

Quote:

Originally Posted by b1adesofcha0s (Post 1210950)
That's the plan. I had planned to go to an AutoX event a few weeks ago, but ended up not going because Steve offered to buy me lunch :bowrofl:

:ugh2: :shakes head:

Once you try it at a good location with a good club you will probably be hooked and back there every few weeks. It takes 3 or 4 events before you really start to reach your potential.

b1adesofcha0s 07-10-2011 10:30 AM

Quote:

Originally Posted by ChrisSlicks (Post 1211042)
:ugh2: :shakes head:

Once you try it at a good location with a good club you will probably be hooked and back there every few weeks. It takes 3 or 4 events before you really start to reach your potential.

Yeah the only problem for me is finding one that is at a good time for me and isn't too far away. I work 6 days a week so my free time is limited.

TBOX 07-10-2011 11:02 AM

I'm gonna have to be honest. I Don't think understeer from stagger is the issue everyone makes it out to be. My right pedal provides the back end of the car plenty of rotation on the track. Maybe my setup is different, but my car leans toward oversteering during high speed autox. I run 265 305 and I was running -1.7 camber all around. I'm now a touch positive to that as I raised a quarter inch.

Maybe in small autocross corners it pushes... I don't know. But at higher speed it tends toward oversteer. And at high speed, Id prefer to err more toward under.

Xplicit97 07-30-2012 04:28 AM

Does anyone have any pics of their square setups? Im contemplating doing a Vossen CV3 20X10.5 +15 square set up, in order to get the most concave look.. My current set up is a bit too aggressive for a daily setup for me.


All times are GMT -5. The time now is 02:57 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2