3M CF/DiNoc-wrapped illuminated kick plates

FromG2Z · 06-29-2011, 04:53 PM

I was thinking about doing this, since I've seen several STi's with it done, and it actually looks very classy with the interior stock silver/titanium pieces.

Would that look good on our kick plates? I was thinking just the black plastic portion would get covered, and leave the silver aluminum piece exposed of course.

Has anyone done this and have pics???

kenchan · 06-29-2011, 05:09 PM

yep, i already did them...

XwChriswX · 06-29-2011, 05:18 PM

Quote:

Originally Posted by kenchan

yep, i already did them...

That does look pretty sweet... Would you be interested in doing others?

kenchan · 06-29-2011, 05:33 PM

Quote:

Originally Posted by XwChriswX

That does look pretty sweet... Would you be interested in doing others?

hahaha, part of it is my box cutter skillz, but the other part is how i wrapped it on the physical piece. so i would have to be there in person to wrap it unless one has experience with this stuff.

but then if one had experience with DiNoc he/she would be able to make one pretty easy.

so i guess my answer is no.

XwChriswX · 06-29-2011, 05:45 PM

Quote:

Originally Posted by kenchan

hahaha, part of it is my box cutter skillz, but the other part is how i wrapped it on the physical piece. so i would have to be there in person to wrap it unless one has experience with this stuff.

but then if one had experience with DiNoc he/she would be able to make one pretty easy.

so i guess my answer is no.

What if someone say ordered them, and shipped them To you?

(I don't have illuminated ones myself)

SPOHN · 06-29-2011, 06:20 PM

How does this stuff apply to the surface?

kenchan · 06-29-2011, 07:42 PM

Quote:

Originally Posted by SPOHN

How does this stuff apply to the surface?

Oh you have to lick the back side.

SPOHN · 06-29-2011, 07:59 PM

Quote:

Originally Posted by kenchan

Oh you have to lick the back side.

Your favorite hobby

kenchan · 06-29-2011, 08:29 PM

Quote:

Originally Posted by SPOHN

Your favorite hobby

yuk!

bullitt5897 · 06-29-2011, 09:50 PM

I was planning to do this on mine... this is a really simple job but if someone is local to atlanta I will be more than happy to do it for them.

Mike

FromG2Z · 06-30-2011, 12:43 AM

Ken... thanks for the pic. Did you have to remove the kick plate to install the 3M CF vinyl? I hope it wasn't a pain

Also, you wrapped the section opposite of what I was thinking. I wanted to have the black curved plastic section to be wrapped while leaving the silver section as is. What do you guys think of that?!?!?!

augustabites · 06-30-2011, 09:08 AM

Nice pic Ken!!

For someone who can snap a rubber strap wrench, you have a delicate touch (complement).

Did you use adhesion promoter for this?
(i'm noticing that di-noc isn't as forgiving as i was made to believe).

Thanks.

---Augustabites

kenchan · 06-30-2011, 12:16 PM

Quote:

Originally Posted by FromG2Z

Ken... thanks for the pic. Did you have to remove the kick plate to install the 3M CF vinyl? I hope it wasn't a pain

Also, you wrapped the section opposite of what I was thinking. I wanted to have the black curved plastic section to be wrapped while leaving the silver section as is. What do you guys think of that?!?!?!

no, im a pretty lazy guy so i just cut to shape and placed it on there.

i think the reverse is a nice contrast but might have a hard time adhering to the textured surface unless you take the piece off and wrap it around. id' also use adhesion promotor as well.

Quote:

Originally Posted by augustabites

Nice pic Ken!!

For someone who can snap a rubber strap wrench, you have a delicate touch (complement).

Did you use adhesion promoter for this?
(i'm noticing that di-noc isn't as forgiving as i was made to believe).

Thanks.

---Augustabites

hahaha!~

im a musician so i have very fine motor skills too.

on the bits i DiNoc'ed i did not use adhesion promotor. DiNoc sticks very well to smooth surfaces but has a harder time on textured surfaces. if im doing the black part of the kick plates i would use adhesion promotor and wrap it to the back of the piece.

XwChriswX · 06-30-2011, 02:28 PM

You still haven't answered my proposition Ken...

FromG2Z · 06-30-2011, 02:44 PM

Quote:

Originally Posted by kenchan

no, im a pretty lazy guy so i just cut to shape and placed it on there.

i think the reverse is a nice contrast but might have a hard time adhering to the textured surface unless you take the piece off and wrap it around. id' also use adhesion promotor as well.

Ah I see... yes, might have to wrap it to do the black textured plastic. Are those kick plates easy to remove?

BTW, my 3M guy told me to explain to everyone that the stuff he is using is NEW from 3M. DiNoc is the OLD stuff. This new stuff he used on my rear valence (and will use on other stuff) is called ScotchPrint 1080. It's supposed to be easier to work with, and really made for automotive, as opposed to DiNoc. Also, the texture is better.

I really need to take a pic (DSLR) of the rear valence he did. My installer rocks. I'll do it tonight after I detail my car.

06-29-2011, 04:53 PM	#1 (permalink)
FromG2Z A True Z Fanatic Join Date: Nov 2010 Location: Fields of Opportunities Posts: 1,406 Drives: '12 5.0, kona, 6MT Rep Power: 18	3M CF/DiNoc-wrapped illuminated kick plates I was thinking about doing this, since I've seen several STi's with it done, and it actually looks very classy with the interior stock silver/titanium pieces. Would that look good on our kick plates? I was thinking just the black plastic portion would get covered, and leave the silver aluminum piece exposed of course. Has anyone done this and have pics??? __________________ 2012 5.0 GT Prem, Kona Blue, 6MT, HID, Brembo, 3.73 -- Ordered: 9/20/11, Born on: 10/20/11, Delivered 11/15/11"Marilyn" GT500 mufflers/flaps, MGW shifter, FRPP K springs, BMR panhard bar, Boss coil covers, 3DC spoiler, Llumar Tint (35% and 20%), 3M ClearBra

06-29-2011, 06:20 PM	#6 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	How does this stuff apply to the surface? __________________

06-29-2011, 09:50 PM	#10 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	I was planning to do this on mine... this is a really simple job but if someone is local to atlanta I will be more than happy to do it for them. Mike __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

06-30-2011, 12:43 AM	#11 (permalink)
FromG2Z A True Z Fanatic Join Date: Nov 2010 Location: Fields of Opportunities Posts: 1,406 Drives: '12 5.0, kona, 6MT Rep Power: 18	Ken... thanks for the pic. Did you have to remove the kick plate to install the 3M CF vinyl? I hope it wasn't a pain Also, you wrapped the section opposite of what I was thinking. I wanted to have the black curved plastic section to be wrapped while leaving the silver section as is. What do you guys think of that?!?!?! __________________ 2012 5.0 GT Prem, Kona Blue, 6MT, HID, Brembo, 3.73 -- Ordered: 9/20/11, Born on: 10/20/11, Delivered 11/15/11"Marilyn" GT500 mufflers/flaps, MGW shifter, FRPP K springs, BMR panhard bar, Boss coil covers, 3DC spoiler, Llumar Tint (35% and 20%), 3M ClearBra

06-30-2011, 02:28 PM	#14 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	You still haven't answered my proposition Ken... __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

06-29-2011, 05:09 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	yep, i already did them...

06-30-2011, 09:08 AM	#12 (permalink)
augustabites Base Member Join Date: Jan 2009 Location: Georgia Posts: 44 Drives: 09 Z PG 6MT Sport Rep Power: 16	Nice pic Ken!! For someone who can snap a rubber strap wrench, you have a delicate touch (complement). Did you use adhesion promoter for this? (i'm noticing that di-noc isn't as forgiving as i was made to believe). Thanks. ---Augustabites

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Illuminated Kick Plates	ejrives	DIY Section (Do-It-Yourself)	133	07-12-2019 02:12 AM
Illuminated kick plates always on?	KptKIDLAT	Exterior & Interior	15	08-30-2012 11:08 PM
WTB: Illuminated Kick Plates	Boost_lee	Wanted	0	01-30-2011 04:28 PM
Illuminated Kick Plates	KptKIDLAT	DIY Section (Do-It-Yourself)	3	08-29-2010 09:53 AM
Illuminated Kick Plates	twotonezed	Parts for sale (Private Classifieds)	7	06-22-2010 01:53 AM