You will have to cut the whole thing out down the bottom. its too long too
|
|
LinkBack | Thread Tools | Display Modes |
01-13-2012, 06:36 PM | #78 (permalink) |
Base Member
Join Date: Nov 2011
Location: Diamond Bar, CA
Posts: 63
Drives: 12 370z Gunmetal 6MT
Rep Power: 14 |
First time officially using my Sea Sucker last night...sorry for poor quality cell phone pics...I just wanted to get unpacked and eat dinner :P
Pretty happy with it. Don't mind taking front tires off since I had to do it on my 08 Sti's roof rack set up anyways (subaru rails with Yakima fork lift). Mounting takes barely any time at all. Directions say to always clean the surface and moisten the cups and that is what I do. Always inspect the cups for nicks, cuts, damage before use and comes with plastic covers to protect cups when not in use. Also came with a spare cup and silicone lubricant in case I need to change the cup or disassemble pumps to re-lubricate gaskets. Will most likely get an SUV of some sort in the next few years, but this works great for me now. Going to get another so my wife and I can ride together. Only downfall, cannot go riding unless I plan to head straight home because it is not safe to park and leave the mount/bike unattended. I got a rear Thule gateway 2 to work on my Z, but it made so much wind noise, it annoyed me. Also the trunk lid would slightly open/close over bumps even though the hatch was locked shut. I would never consider a trunk mount again...too time consuming and potential for scratches/dents. -Ray |
02-21-2012, 07:33 PM | #80 (permalink) | |
Enthusiast Member
Join Date: Nov 2010
Location: Los Angeles, CA
Posts: 330
Drives: 2011 Nissan 370Z
Rep Power: 15 |
Quote:
Nice setup. Where did you get it?
__________________
|
|
05-07-2012, 11:08 PM | #81 (permalink) |
Track Member
Join Date: May 2009
Location: New York
Age: 65
Posts: 914
Drives: 370Z/Sport/Black/MT
Rep Power: 17 |
Bumping an old one, but I'm about to pull the trigger on the SeaSucker and was wondering if there have been any updates as far as options are concerned.
__________________
09 Sport / MB / 6sd / Nismo"R" Intake / Eibach Pro Kit / Z1 25 row cooler / JWT LW FW / New Short Block 3/11/11 /H&R 15fr 20rr/DBA 4000/FI CB with 12"res./Morel/JL/"Division"mod/SPC/EcuTek/M370/ZEX C SHOT/ART's/NRG |
05-08-2012, 09:58 AM | #82 (permalink) |
A True Z Fanatic
Join Date: Jun 2009
Location: Detroit
Posts: 1,294
Drives: 09 370Z Red Sport-MT
Rep Power: 18 |
I do know that a friend of mine has been using one on his G35 for a while now and LOVES it. They put the suction cups on a store window and he was able to stand on it. :P
|
05-08-2012, 11:07 AM | #83 (permalink) |
Track Member
Join Date: May 2009
Location: New York
Age: 65
Posts: 914
Drives: 370Z/Sport/Black/MT
Rep Power: 17 |
Thanks for the input. Looks like the way to go!
__________________
09 Sport / MB / 6sd / Nismo"R" Intake / Eibach Pro Kit / Z1 25 row cooler / JWT LW FW / New Short Block 3/11/11 /H&R 15fr 20rr/DBA 4000/FI CB with 12"res./Morel/JL/"Division"mod/SPC/EcuTek/M370/ZEX C SHOT/ART's/NRG |
06-23-2012, 06:24 PM | #84 (permalink) |
Enthusiast Member
Join Date: Jun 2009
Location: Little Rock, AR
Posts: 425
Drives: 09 370Z Blue 6spd
Rep Power: 184 |
To all those using the SeaSucker Talon:
how do you like the rack and do you recommend it? What's the most optimal mounting position for the least amount of wind resistance? Also, do the crank arms spin and hit/touch the car? Do you secure them to the frame? Is anyone using their cable anchor? Last edited by jikhead; 06-23-2012 at 06:37 PM. |
06-23-2012, 09:22 PM | #85 (permalink) | |
Base Member
Join Date: May 2011
Location: USA
Posts: 80
Drives: 2011 Nissan 370Z 7AT
Rep Power: 14 |
Quote:
(#1) Yes. I like it and would recommend the SeaSucker Talon. I previously had the Boofsquire rack (another good product) but needed something compatible with any vehicle. (#2) Not sure. I currently have the front fork mounted right behind the driver's side door (visible in picture #1 below), but the front fork can be mounted at the top of the front windshield (see post #78 by SiRay6). (#3) Arms don't spin as far as I know and there is no contact to rear window by the pedals. I don't have them secured while driving. (#4) I don't have the anchor cable and would like to see if there is an alternative. I don't want to have a cable dangling from my Z. My Talon came with the upgraded Delta Hitch Pro fork mount which is very easy and quick to use. Just had to buy a padlock (visible in picture #2 below) which provides some security. I do have to remove the Talon every time i take off my bike at a trail to deter thieves, but it's more versatile then my previous rack so I don't mind. I have gone 80 mph for 40 miles with no issues. This is the farthest and fastest I have driven so far with the SeaSucker Talon attached. On a side note, I always have people stop by my car and inquire about my SeaSucker Talon. Good conversation piece. Last edited by slumpey; 07-02-2012 at 06:44 PM. |
|
06-24-2012, 09:13 PM | #88 (permalink) |
A True Z Fanatic
Join Date: Nov 2009
Location: Not in Sunny Florida
Posts: 6,358
Drives: 16 Nismo w/Tech Pack
Rep Power: 4500 |
__________________
2009 370Z MB Base w/Sport Package 6MT Modshack's Custom Air Intakes /3M Clear Bra/ Illuminated Kick Plates / F. I CBE w/12" resonators / EVO-R Front Lip / Rear Hatch Wing / Tein S-Tech Springs /Ilegal Tint in the Rep. of VA/4x20mm Z1 Spacers/ Vinyl Roof/Liquid Carbon Designs |
06-25-2012, 07:20 AM | #89 (permalink) |
Base Member
Join Date: May 2011
Location: USA
Posts: 80
Drives: 2011 Nissan 370Z 7AT
Rep Power: 14 |
Since the Z is my only car I have to do with what works. I found the SeaSucker Talon to be the least obtrusive and is only attached when I am transporting a bike.
Last edited by slumpey; 06-25-2012 at 07:22 AM. |
06-25-2012, 10:55 PM | #90 (permalink) |
Enthusiast Member
Join Date: Jun 2009
Location: Little Rock, AR
Posts: 425
Drives: 09 370Z Blue 6spd
Rep Power: 184 |
I think I'm going to order the Talon soon. I believe I'll give that locking plate a try as well; but I'm going to dip it in some of that liquid plastic to give it a rubber coating. The bare metal scares me that it might scratch the paint.
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Crazy NYC Bike Messengers Racing Through Manhattan Traffic | AK370Z | Other Vehicles | 8 | 05-23-2009 03:02 AM |
Question??? | Xavier Raymond | Nissan 370Z General Discussions | 1 | 03-31-2009 11:01 AM |
7AT Question | sbkim | Engine & Drivetrain | 5 | 03-06-2009 03:22 PM |
anyone know how much gross/profit these 370's carry? | g35300mm | Nissan 370Z Pricing / Ordering Discussions | 4 | 02-06-2009 10:10 AM |
Kid Plays Guitar Hero with Bike | AK370Z | The Lounge (Off Topic) | 3 | 11-21-2008 11:00 PM |