Jim Wolfe Dual PopCharger

Mr.Squeeze · 06-04-2011, 12:09 AM

Quote:

Originally Posted by smokejr

You have to cut some to get the tubes thru to the front, not much, I have done this but
wonder if it is possible to re-install the stock intake without having to fab something??
I liked the throttle response after doing the mod, was much smoother.

You can re-install the stock intake without having to make something up.

edub370 · 06-05-2011, 10:30 AM

what about Inejn's CAI? my car came with them on and they seem great (on the butt dyno). plus they are a true cold air system. simliar so stillens without the last curve no? plus they sound amazing!

if these things aren't good then someone needs to school me on why

shadoquad · 06-05-2011, 10:34 AM

Quote:

Originally Posted by edub370

what about Inejn's CAI? my car came with them on and they seem great (on the butt dyno). plus they are a true cold air system. simliar so stillens without the last curve no? plus they sound amazing!

Wondering this myself.

AAM also offers its own custom long tube CAI. I don't know what makes Stillen magically better than both.

I've heard the Injens may suffer hydrolock, but then again I don't go driving my Z in a foot of standing water.

edub370 · 06-05-2011, 10:41 AM

idk how they would any more than a stillen...?

shadoquad · 06-05-2011, 10:48 AM

Quote:

Originally Posted by edub370

idk how they would any more than a stillen...?

The positioning of the air filters. The Stillen one sits behind the bumper sort of, whereas the Injens are close to the ground.

Either way, I've not had a problem, and neither did the original owner of the Injens who I bought them from.

KillerBee370 · 06-05-2011, 11:45 AM

I tested the JWT pop chargers when they developed them. I lost power on the dyno because of heat soak. Went with Gen III's instead. Pop chargers are somewhere gathering dust now. Better airflow than stock boxes 6MT? Sure. But sucking in all the hot air under the hood = better off with stock boxes and a K&N drop in or CAI from Stillen.

butdamnbrian · 06-05-2011, 11:08 PM

Quote:

Originally Posted by KillerBee370

I tested the JWT pop chargers when they developed them. I lost power on the dyno because of heat soak. Went with Gen III's instead. Pop chargers are somewhere gathering dust now. Better airflow than stock boxes 6MT? Sure. But sucking in all the hot air under the hood = better off with stock boxes and a K&N drop in or CAI from Stillen.

RCZ · 06-05-2011, 11:27 PM

I installed these way back when and they made no power. No short ram intake will make any power on this car. Just get Stillen G3's.

FromG2Z · 06-05-2011, 11:34 PM

What about the R2C intakes? I thought those made as much power as the G3's? I still haven't seen any dyno charts on this.... after all this time, and several other threads. Still no dyno charts. So what's the verdict?

christian370z · 06-06-2011, 01:02 AM

Quote:

Originally Posted by edub370

what about Inejn's CAI? my car came with them on and they seem great (on the butt dyno). plus they are a true cold air system. simliar so stillens without the last curve no? plus they sound amazing!

if these things aren't good then someone needs to school me on why

I know at least 4 people in Socal that have had significant problems with Injen intakes taking up too much moisture even from the regular water spray off the road and causing problems ranging from poor drivability and stalling to the car not starting due to the water messing with the MAF sensors.

I have yet to hear of a single issue with the Stillen G3 intakes, which are still the king of peak power gains in terms of intakes.

KillerBee370 · 06-06-2011, 01:29 AM

Quote:

Originally Posted by christian370z

I know at least 4 people in Socal that have had significant problems with Injen intakes taking up too much moisture even from the regular water spray off the road and causing problems ranging from poor drivability and stalling to the car not starting due to the water messing with the MAF sensors.

I have yet to hear of a single issue with the Stillen G3 intakes, which are still the king of peak power gains in terms of intakes.

THIS

Listen, Stillen just nailed it with the Gen III intake. Honestly you'd be wasting money on anything else or at least not getting the same gains.

edub370 · 06-06-2011, 09:03 AM

wellll my car doesn't ever see rain so that shouldn't be a huge issue. what about the hp diff in the 2 intakes?

FromG2Z · 06-06-2011, 09:25 AM

Bump for any info on R2C intake gains as well...

christian370z · 06-06-2011, 11:14 AM

Quote:

Originally Posted by edub370

wellll my car doesn't ever see rain so that shouldn't be a huge issue. what about the hp diff in the 2 intakes?

Maybe a couple wheel horsepower and torque on the dyno, but the ram air effect with the Stillen intake will be greater at speed due to higher amounts of air being pushed through the bumper/radiator area as opposed to the location of the Injens.

I haven't seen any intake air temperature data comparing the Injen and Stillen G3 intakes though so I'm not sure if there is a difference there.

shadoquad · 06-06-2011, 11:55 AM

Quote:

Originally Posted by christian370z

I know at least 4 people in Socal that have had significant problems with Injen intakes taking up too much moisture even from the regular water spray off the road and causing problems ranging from poor drivability and stalling to the car not starting due to the water messing with the MAF sensors.

I have yet to hear of a single issue with the Stillen G3 intakes, which are still the king of peak power gains in terms of intakes.

Interesting. I've driven in heavy rain and had none of those problems with my Injen CAI's.

06-05-2011, 10:30 AM	#32 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	what about Inejn's CAI? my car came with them on and they seem great (on the butt dyno). plus they are a true cold air system. simliar so stillens without the last curve no? plus they sound amazing! if these things aren't good then someone needs to school me on why __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq Last edited by edub370; 06-05-2011 at 10:41 AM.

06-05-2011, 10:41 AM	#34 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	idk how they would any more than a stillen...? __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

06-05-2011, 11:34 PM	#39 (permalink)
FromG2Z A True Z Fanatic Join Date: Nov 2010 Location: Fields of Opportunities Posts: 1,406 Drives: '12 5.0, kona, 6MT Rep Power: 18	What about the R2C intakes? I thought those made as much power as the G3's? I still haven't seen any dyno charts on this.... after all this time, and several other threads. Still no dyno charts. So what's the verdict? __________________ 2012 5.0 GT Prem, Kona Blue, 6MT, HID, Brembo, 3.73 -- Ordered: 9/20/11, Born on: 10/20/11, Delivered 11/15/11"Marilyn" GT500 mufflers/flaps, MGW shifter, FRPP K springs, BMR panhard bar, Boss coil covers, 3DC spoiler, Llumar Tint (35% and 20%), 3M ClearBra

06-06-2011, 09:03 AM	#42 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	wellll my car doesn't ever see rain so that shouldn't be a huge issue. what about the hp diff in the 2 intakes? __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

06-06-2011, 09:25 AM	#43 (permalink)
FromG2Z A True Z Fanatic Join Date: Nov 2010 Location: Fields of Opportunities Posts: 1,406 Drives: '12 5.0, kona, 6MT Rep Power: 18	Bump for any info on R2C intake gains as well... __________________ 2012 5.0 GT Prem, Kona Blue, 6MT, HID, Brembo, 3.73 -- Ordered: 9/20/11, Born on: 10/20/11, Delivered 11/15/11"Marilyn" GT500 mufflers/flaps, MGW shifter, FRPP K springs, BMR panhard bar, Boss coil covers, 3DC spoiler, Llumar Tint (35% and 20%), 3M ClearBra

06-05-2011, 11:45 AM	#36 (permalink)
KillerBee370 A True Z Fanatic Join Date: Mar 2009 Location: So Cal baby! Age: 51 Posts: 5,964 Drives: with passion Rep Power: 321	I tested the JWT pop chargers when they developed them. I lost power on the dyno because of heat soak. Went with Gen III's instead. Pop chargers are somewhere gathering dust now. Better airflow than stock boxes 6MT? Sure. But sucking in all the hot air under the hood = better off with stock boxes and a K&N drop in or CAI from Stillen.

06-05-2011, 11:27 PM	#38 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	I installed these way back when and they made no power. No short ram intake will make any power on this car. Just get Stillen G3's.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] AAM Dual Exhaust	cyerkes	Parts for sale (Private Classifieds)	9	05-06-2011 09:14 AM
Single or Dual ??	HT Rambler	Audio & Video	3	06-08-2010 07:15 AM
Injen dual cai / Invidia dual cbe	Jules	Nissan 370Z Photos / Spyshots / Video / Media Gallery	0	04-14-2010 07:23 PM
MXP Dual Exhaust	Reaper 996S	Intake/Exhaust	4	02-26-2010 12:15 AM
Jim Wolf Dual PopCharger at the 370ZSOURCE!!!!!!!!!!!!!!!!!!!!!!!!!	Michael@TheZStore	Exhaust/Intake	3	02-17-2009 10:09 PM