Jim Wolfe Dual PopCharger

kenchan · 06-03-2011, 11:57 AM

the R2C i had before did pretty damn well for me. the responsiveness was much better than stock setup and the IAT's were pretty much stock. the heatsheilds they use is far cleaner than the JWT and fits better too.

i originally had the JWT and it sounded good. fitment wasn't perfect and IAT's were higher. i like the fact that the venturies have inlets in the front and conal sides.

im using HPS tubes and KN drop-ins (i already had these from the past) more for noise control. responsiveness is about as good as the R2C.

imho if you're going CAI go R2C.

onzedge · 06-03-2011, 12:19 PM

Quote:

Originally Posted by kenchan

the R2C i had before did pretty damn well for me. the responsiveness was much better than stock setup and the IAT's were pretty much stock. the heatsheilds they use is far cleaner than the JWT and fits better too.

i originally had the JWT and it sounded good. fitment wasn't perfect and IAT's were higher. i like the fact that the venturies have inlets in the front and conal sides.

im using HPS tubes and KN drop-ins (i already had these from the past) more for noise control. responsiveness is about as good as the R2C.

imho if you're going CAI go R2C.

Mr, Kenchan. What is R2C?

Jack370Z · 06-03-2011, 01:39 PM

Quote:

Originally Posted by onzedge

Mr, Kenchan. What is R2C?

Zedge...the best I could find on the R2C is, well...I'm not sure. Here is the link I found...

Deprecated Browser Error

Couldn't determine a price or much about them to be honest. The JWT definitely has a hood seal to keep the radiator wash away as much as possible. Maybe Kenchen will come thru with more data?

onzedge · 06-03-2011, 01:54 PM

Quote:

Originally Posted by Jack370Z

Zedge...the best I could find on the R2C is, well...I'm not sure. Here is the link I found...

Deprecated Browser Error

Couldn't determine a price or much about them to be honest. The JWT definitely has a hood seal to keep the radiator wash away as much as possible. Maybe Kenchen will come thru with more data?

Thanks, man.

kenchan · 06-03-2011, 03:21 PM

Quote:

Originally Posted by onzedge

Mr, Kenchan. What is R2C?

they make intakes for our Z's.

they're actually a dry filter manufacturer. they make these in the USA.

R2C HomePage

onzedge · 06-03-2011, 03:27 PM

Quote:

Originally Posted by kenchan

they make intakes for our Z's.

they're actually a dry filter manufacturer. they make these in the USA.

R2C HomePage

Thanks, Mr. Kenchan. I can't tell from the website if these are complete intakes -- all the way to the throtlle bodies.

kenchan · 06-03-2011, 03:49 PM

Quote:

Originally Posted by onzedge

Thanks, Mr. Kenchan. I can't tell from the website if these are complete intakes -- all the way to the throtlle bodies.

here you go~

Your one stop online shop for the best prices on the net: AMSOIL,R2C Intakes,Invidia, BC Racing, HKS, Tein, Greddy, MBRP Exhaust,Hawk,Project MU, StopTech,Mishimoto,AEM,Injen:Nissan, Infiniti, Chevrolet, BMW,Honda, Hyundai, Mitsubishi,Scion,Subaru

kenchan · 06-03-2011, 03:58 PM

onzedge- btw, the intake will not remove the throttle lag. just letting you know one would need a reflash for that.

but it does improve things considerably... considerably more than HPS + K&N drop-ins for sure..atleast on my car.

onzedge · 06-03-2011, 04:00 PM

Thank you Mr. Kenchan. Have a great weekend.

kenchan · 06-03-2011, 04:06 PM

Quote:

Originally Posted by onzedge

Thank you Mr. Kenchan. Have a great weekend.

thank you sir. have a nice weekend too.

onzedge · 06-03-2011, 04:09 PM

Quote:

Originally Posted by kenchan

thank you sir. have a nice weekend too.

Jack370Z · 06-03-2011, 04:35 PM

Quote:

Originally Posted by kenchan

onzedge- btw, the intake will not remove the throttle lag. just letting you know one would need a reflash for that.

but it does improve things considerably... considerably more than HPS + K&N drop-ins for sure..atleast on my car.

kenchan...the throttle lag is no longer evident on my Z and the only thing I've changed is the OEM intakes. Maybe it is the venturi type inlets of the JWT. I suppose it could be my imagination but I have been paying particular attention to that...it is so improved I'm impressed. The venturi inlets speed up the air and it is so undisturbed it is cleaner getting to the throttle body.

kenchan · 06-03-2011, 06:04 PM

Quote:

Originally Posted by Jack370Z

kenchan...the throttle lag is no longer evident on my Z and the only thing I've changed is the OEM intakes. Maybe it is the venturi type inlets of the JWT. I suppose it could be my imagination but I have been paying particular attention to that...it is so improved I'm impressed. The venturi inlets speed up the air and it is so undisturbed it is cleaner getting to the throttle body.

Sounds good. I believe it cause I experienced the same on both JWT and R2C. When I put the stock box throttle response wnt down considerably. I still had some lag though even with the cai. My G has no lag so that is wat I am benchmarking.

FromG2Z · 06-03-2011, 10:07 PM

Ken.... why did you remove your R2C's if you were happy with it? If I ever go CAI, the R2C option might be it for me. I am not interested in removing the bumper and cutting through my framework for an install. How does the R2C compare to the Stillen G3's in your opinion? Same gains? more? less?

kenchan · 06-03-2011, 10:50 PM

Quote:

Originally Posted by FromG2Z

Ken.... why did you remove your R2C's if you were happy with it? If I ever go CAI, the R2C option might be it for me. I am not interested in removing the bumper and cutting through my framework for an install. How does the R2C compare to the Stillen G3's in your opinion? Same gains? more? less?

I must be old cause I wanted to keep it kinda quiet and so went back to the stock box.

That was the only reason.

I too did not like the idea of removing the bumper although its not a huge deal.

I've no experience with the long tubes on my car so I can't comment.

06-03-2011, 04:00 PM	#24 (permalink)
onzedge A True Z Fanatic Join Date: Apr 2010 Location: Battle Lake MN Age: 63 Posts: 183,964 Drives: 370Z 240Z Rep Power: 2684736	Thank you Mr. Kenchan. Have a great weekend. __________________ Koni\|Swift\|Michelin\|Motordyne\|Berk\|RJM Performance\|Gates\|SPL\|Motul\|Technafit\|Ate Super Blue\|Hawk Tommy Kaira\|Momo\|Optima\|Hella\|Hotchkis\|Red Line\|ZSpeed\|Stillen\|B&M\|H&R

06-03-2011, 10:07 PM	#29 (permalink)
FromG2Z A True Z Fanatic Join Date: Nov 2010 Location: Fields of Opportunities Posts: 1,406 Drives: '12 5.0, kona, 6MT Rep Power: 17	Ken.... why did you remove your R2C's if you were happy with it? If I ever go CAI, the R2C option might be it for me. I am not interested in removing the bumper and cutting through my framework for an install. How does the R2C compare to the Stillen G3's in your opinion? Same gains? more? less? __________________ 2012 5.0 GT Prem, Kona Blue, 6MT, HID, Brembo, 3.73 -- Ordered: 9/20/11, Born on: 10/20/11, Delivered 11/15/11"Marilyn" GT500 mufflers/flaps, MGW shifter, FRPP K springs, BMR panhard bar, Boss coil covers, 3DC spoiler, Llumar Tint (35% and 20%), 3M ClearBra

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] AAM Dual Exhaust	cyerkes	Parts for sale (Private Classifieds)	9	05-06-2011 08:14 AM
Single or Dual ??	HT Rambler	Audio & Video	3	06-08-2010 06:15 AM
Injen dual cai / Invidia dual cbe	Jules	Nissan 370Z Photos / Spyshots / Video / Media Gallery	0	04-14-2010 06:23 PM
MXP Dual Exhaust	Reaper 996S	Intake/Exhaust	4	02-25-2010 11:15 PM
Jim Wolf Dual PopCharger at the 370ZSOURCE!!!!!!!!!!!!!!!!!!!!!!!!!	Michael@TheZStore	Exhaust/Intake	3	02-17-2009 09:09 PM

06-03-2011, 11:57 AM	#16 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	the R2C i had before did pretty damn well for me. the responsiveness was much better than stock setup and the IAT's were pretty much stock. the heatsheilds they use is far cleaner than the JWT and fits better too. i originally had the JWT and it sounded good. fitment wasn't perfect and IAT's were higher. i like the fact that the venturies have inlets in the front and conal sides. im using HPS tubes and KN drop-ins (i already had these from the past) more for noise control. responsiveness is about as good as the R2C. imho if you're going CAI go R2C.

06-03-2011, 03:58 PM	#23 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	onzedge- btw, the intake will not remove the throttle lag. just letting you know one would need a reflash for that. but it does improve things considerably... considerably more than HPS + K&N drop-ins for sure..atleast on my car.