windows dont automatically roll up?

DJcuetip · 04-10-2009, 10:21 PM

Hey guys my windows recently don't roll up automatically (when you press the button all the way up)... they roll down automatically just fine... and I can roll them up however now i have to hold the button up the whole time while it is all the way closed..
has anyone had this problem or know what to do to fix this?

SoCal 370Z · 04-10-2009, 10:24 PM

Did you disconnect your battery? From the Owners Manual:

If the windows do not close automatically
If the power window automatic function (closing
only) does not operate properly, perform the
following procedure to initialize the power
window system.

1. Push the ignition switch to the ON position.

2. Close the door.

3. Open the window completely by operating
the power window switch.

4. Pull the power window switch and hold it to
close the window, and then hold the switch
more than 3 seconds after the window is
closed completely.

5. Release the power window switch. Operate
the window by the automatic function to
confirm the initialization is complete.

6. Perform steps 2 through 5 above for other
windows.

If the power window automatic function does
not operate properly after performing the procedure
above, have your vehicle checked by a
NISSAN dealer.

DJcuetip · 04-10-2009, 11:08 PM

thank you!!! works now =D

04-10-2009, 10:21 PM	#1 (permalink)
DJcuetip Track Member Join Date: Dec 2008 Location: CA Posts: 704 Drives: 370 Rep Power: 260	windows dont automatically roll up? Hey guys my windows recently don't roll up automatically (when you press the button all the way up)... they roll down automatically just fine... and I can roll them up however now i have to hold the button up the whole time while it is all the way closed.. has anyone had this problem or know what to do to fix this?

04-10-2009, 10:24 PM	#2 (permalink)
SoCal 370Z A True Z Fanatic Join Date: Feb 2009 Location: US of A Posts: 2,842 Drives: Answers Rep Power: 33	Did you disconnect your battery? From the Owners Manual: If the windows do not close automatically If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system. 1. Push the ignition switch to the ON position. 2. Close the door. 3. Open the window completely by operating the power window switch. 4. Pull the power window switch and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed completely. 5. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete. 6. Perform steps 2 through 5 above for other windows. If the power window automatic function does not operate properly after performing the procedure above, have your vehicle checked by a NISSAN dealer. __________________ ( Click to show/hide ) Why I NEVER say NO to the Panda Lou Fusz!!! Last edited by SoCal 370Z; 04-10-2009 at 10:28 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dont buy this	armensti	Exterior & Interior	44	11-17-2010 07:00 PM
San Diego Roll Call!	CrookedTeeth	New Forum Member	14	05-14-2009 02:19 AM
ISR in Houston: If you dont condone, dont come in	BurntGauge	Other Vehicles	4	04-07-2009 09:57 PM
Nissan is On a Roll!	SoCal 370Z	Other Vehicles	11	03-03-2009 08:18 PM

04-10-2009, 11:08 PM	#3 (permalink)
DJcuetip Track Member Join Date: Dec 2008 Location: CA Posts: 704 Drives: 370 Rep Power: 260	thank you!!! works now =D