Need Help

MVPTonyD

Follow my instruction.

(if you have a remote)

1st: Erase the previous codes by pressing the two outter buttons for 20 seconds.
2nd: Hold the remote about 2 inches away from the button you want,, and press the button you want to program and the remote. The lights shoul start blinking slow then rapidly.
3rd: Your Homelink should be program.
4th: repeat steps if it does not work

W/O a remote
1st: Erase the previous codes by pressing the two outter buttons for 20 seconds.
2nd: Find your "SMART/Learn" button on your garage opener/motor.
3rd: You then have 30 second to get back to your car.
4th: Press the button you would want to chose 3 times, until your garage starts moving.
5th: repeat steps if it does not work.

YouTube - Program Your in-car Garage Door Opener

__________________

370Zune

Not sure what I did different but this morning after about 3 more attempts I finally got it to work, a big thanks to all that posted.
David

Mecinoid

Glad you got it to work. I used the learning feature on my garage door as follows. The first thing you need to is of course find the learn button and press it. The difference in what you have explained and how it works is that you then have the hold the button on the Homelink in the car UNTIL the garage door unit's light flashes three times. That is the comfirmation you code was accepted. Really that it.

From there on you shouldn't have any problems if you need to program another garage door opener in the future.

Nate23

I had just as much trouble programming mine. I tried 4 times before it finally worked. After 2 attempts, it locked up and wouldn't reset or enter learning mode so I had to pull the fuse and re-insert it to reset it. Nice once you get it working though...

__________________
2011 370z Coupe: Pearl White, Gray Interior, 6MT, Touring, Sport & Nav.