Nissan 370Z Forum - Need Help

Nissan 370Z Forum (http://www.the370z.com/)

- Nissan 370Z General Discussions (http://www.the370z.com/nissan-370z-general-discussions/)

- - Need Help (http://www.the370z.com/nissan-370z-general-discussions/33047-need-help.html)

The owners manuel does have a seperate section for openers with rolling code.

Quote:

Originally Posted by 370Zune (Post 988150)

:happydance: Not sure what I did different but this morning after about 3 more attempts I finally got it to work, a big thanks to all that posted.
David

Glad you got it to work. I used the learning feature on my garage door as follows. The first thing you need to is of course find the learn button and press it. The difference in what you have explained and how it works is that you then have the hold the button on the Homelink in the car UNTIL the garage door unit's light flashes three times. That is the comfirmation you code was accepted. Really that it.

From there on you shouldn't have any problems if you need to program another garage door opener in the future.:tiphat:

Quote:

Originally Posted by Speedy (Post 1522820)

Could use some help here.

Picked up my 2009 Z last night. It has the homelink mirror with the buttons on it for auto dimming, etc. I noticed it wasn't auto dimming on the way home and figured I just need to check the manual or something.

Checked the manual and tried all the buttons and nothing. No blinking lights nothing. Tried to program my garage door, again no blinking lights even when holding both outside buttons to clear the codes.

I start looking more closely, and it seems the cable has been removed?? There is a plug on the back of the mirror, but no cable plugged in. I found a cover that will fit up on the windshield like a cable cover in the glove box.

I'm thinking the cable is missing? It was a used car so I'm guessing it got swiped, but would appreciate some confirmation before I nag the dealer to replace it.

Thanks in advance!

Looks like the mirror was bought aftermarket and never hooked up. I'm thinking the cable that came with the mirror is missing. Anyone else installed this mirror as aftermarket item and have more on the install.
I'll look for a link.

Maybe this thread will help:

http://www.the370z.com/diy-section-d...ror-cheap.html

Quote:

Originally Posted by Mecinoid (Post 1522948)

Possible, but I think unlikely it's aftermarket. The car has never been titled and came direct from Nissan Corporate to the dealer. They're local to me.

I figured the mirror was supposed to have a connection, I just wanted to confirm it wasn't somehow in the stalk or something before I called the dealer I bought it from to have them get one.

I gave them a call and they said to come by and they'd make it right. I'll update once resolved in case someone else has the issue.

Would appreciate if you find any factory Homelink mirror install info though, so I can see what's involved. Not sure if there's another plug up in the headliner or what.

speedy- there is a DIY somewhere for this. cause i installed mine looking at a pict posted by Mike. he shows which wires to tap. :D

found it!

rep Mike for his pict. :D

http://www.the370z.com/diy-section-d...r-install.html

Quote:

Originally Posted by 370Zune (Post 988150)

:happydance: Not sure what I did different but this morning after about 3 more attempts I finally got it to work, a big thanks to all that posted.
David

I had just as much trouble programming mine. I tried 4 times before it finally worked. After 2 attempts, it locked up and wouldn't reset or enter learning mode so I had to pull the fuse and re-insert it to reset it. Nice once you get it working though...

Quote:

Originally Posted by kenchan (Post 1523052)

speedy- there is a DIY somewhere for this. cause i installed mine looking at a pict posted by Mike. he shows which wires to tap. :D

Thanks for that, however if it came with this Homelink mirror from the factory, there shouldn't be any tapped wires right? Should be pre-wired?

Quote:

Originally Posted by Speedy (Post 1523286)

Thanks for that, however if it came with this Homelink mirror from the factory, there shouldn't be any tapped wires right? Should be pre-wired?

im not sure where the homelink mirror gets installed at the factory or when it arrives US port. but yah, i would assume a factory installed one would have wires pre-wired. :)

Ok update....issue is resolved on mine. The power connector for the mirror was tucked up in the head liner, so it was in fact pre-wired. All hooked up, and programmed to my garage doors. SWEET.

I picked up a PW Z today and tried to program my homelink but no go. I pressed the two buttons on both ends (1 and 3) but it did not reset. Any thoughts on what I should do next before taking it to the dealership?

Raf