Newbie question how do i set rev or shiftlite

CATCHINZZZS

Hey anyone know how to set my rev or shiftlite on tach. I have a Sport 6spd . Ive read the owners manual but kind of confuse on how to set.. Anyone have input on this..thanks.

red6spd

Cycle through the info screen on the left and find shift light or something like that. Select it and use the proper button to chnage the rpm when the light comes on. Just try it, its easy.

__________________
2010 Base+Sport 6spd: Stillen G3, FI Non-Resonated CBE, FI Non-Resonated Test Pipes, UpRev Tuned, Custom 24R Oil Cooler, JDM Rear Fog-OEM Harness.
???Whp ???WTQ (Will find out come spring time)

Jack370Z

It really is simple once you get the hang of it...here is the info from the Owners Manual:


Setting
Setting cannot be made while driving. A
message “Setting can only be operated
when stopped” is also displayed on the
vehicle information display.
The switch *A and switch *B are
used in the setting mode to select and decide a
menu.
SKIP:
Push the switch *A to move to the
warning check mode.
Push the switch*B to select other menus.
ALERT:
Alert menu can be set to notify the following
items.
. UPSHIFT
Select this submenu to set the engine speed
(RPM) of the upshift indicator. (See “Upshift
indicator (if so equipped for Manual Transmission
models)” in the “5. Starting and
driving” section.)


Just use the "B" button and scroll up or down to the RPM you want the lite to activate...I think the default is 7000.

__________________
Jack 09 370Z

CATCHINZZZS

Thanks jack was drivin me nuts tryin to figure out, gonna try this later on...

EazyD

WHat do you all have it set to? I put mine to 7000 recently. I think default is 7500 but by then it's probably too late and the limiter kicks in. Am I wrong about this?

__________________

Pearl White 2010 370Z Sport, Stillen CBE, tint, K&N drop-in filters, GT-R start button, Kenwood DNX-6980 with backup cam, LED bulbs, Raceseng shift knob.

steveg78

Yeah I did the same... By the time you see that light blinking in the corner of your eye you don't have much time when it's set at 7500. I changed mine to 7000 and I like it there. But then again, I hardly take it all the way up to 7000 except getting on highways.

Pelican170

I did the same with setting it to 7000 rpm. just like what you guys said, once you notice it, its almost too late ha.

Mt Tam I am

7000 RPM's is the best setting in my opinion. As previuosly stated at 7500 it is too late, and any earlier and it is just annoying.

__________________
Nissan Motorsports 34R Oil Cooler. Stillen CBE. Hotchkis Sport Sway Bars. KW Variant 3 Coilover System. Stillen Gen3 CAI. Michelin Pilot Super Sport. Stillen Brake Ducts. Carbotech™ XP10/XP8 Pads. Z1 Front Rotors. Z1 Stainless Brake Lines. Two degrees of camber

houkouonchi

Odd. I don't remember ever changing mine but looking at a video where I am accelerating it activated just after I got past 7000 RPM (like 7100 RPM) so I would guess it was set to 7000 and no 7500. Odd!

ProfessorDave

I set mine at 2500 RPMs, so it feels like I'm red-lining in city traffic.

__________________

Rain, snow, sleet, hail: 2009 Mazda 3 sGT HB
Everything else: 2009 370z, PW Touring 6MT

NCSUPACK09

I set mine for 7300 rpm because it blinks from 6800-7300 and then goes solid once you hit the set limit. That gives me plenty of time to know I need to shift.

__________________
2010 Base 370z Magnetic Black 6MT SP
Mods: Bone Stock