![]() |
So it's starting to feel more natural driving stick now, as it's been a week in the Z and it's my first manual. A friend wanted to take a 70mph
|
![]() |
|
LinkBack | Thread Tools | Display Modes |
![]() |
#1 (permalink) |
Track Member
Join Date: Nov 2010
Location: N/A
Posts: 899
Drives: slidewayz
Rep Power: 20 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
So it's starting to feel more natural driving stick now, as it's been a week in the Z and it's my first manual. A friend wanted to take a 70mph roll so I popped it in 4th and gunned it. Keep in mind I have my winter tires on and VDC on cause I'm too puhsey to drive without it right now. I immediately had ~2 car lengths on him but then he was able to stay with me in 5th before I let off. Needless to say we were both surprised I didn't tear him a new one being that hes in a RSX Type-S with some bolt ons. I'm guessing hes pushing around 200-215 at the crank.
For one, this goes to show I don't know the powerband on the Z, and VDC kills speed.
__________________
Powerhouse Amuse | K&N Typhoon Intakes | MotorDyne ART Pipes | Borla Catback Exhaust | B&M Short Shifter | Intake Ducts | Ichiba 25mm F/R Spacers | Carbon Fiber Interior Vinyl Wrap | Tints | 10000k HIDs | Vtak, yo! |
![]() |
![]() |
#2 (permalink) |
A True Z Fanatic
![]() Join Date: Mar 2009
Location: North East
Posts: 6,203
Drives: 09 370Z Sport M6
Rep Power: 653 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
VDC doesn't kill speed. It kills power if activated due to loss of traction. In a straight on roll @ 70mph that isn't likely to happen. If it killed power you would know it as it would feel like someone lifted your foot off the gas.
__________________
Hotchkis ARB | Stillen CAI | Art Pipes | Berk CBE | Stillen AP Racing Brakes | AE Performance Oil Cooler | BC Racing ER Coilovers | Doran Control Arms |
![]() |
![]() |
#3 (permalink) |
Enthusiast Member
|
![]()
#1 - I have to say that this forum does not condome street racing.
I dont know what bolt-ons he has, but being that the car has 205 hp stock, im guessing he has a little more than 215 at the crank (not that it really matters against a Z). Also, why are you dropping it into 4th at 70 mph? If you dropped it into 3rd he would have been a little dot in your rearview mirror. You need figure out which gears to select for your speed.
__________________
2010 Base 370z Magnetic Black 6MT SP Mods: Bone Stock |
![]() |
![]() |
#4 (permalink) |
Track Member
![]() Join Date: Feb 2010
Location: Dallas, TX
Posts: 657
Drives: 2010 370Z
Rep Power: 16 ![]() ![]() |
![]()
I have a bad feeling about this thread lol
__________________
SOLD 12/30/2011 2010 370Z Coupe Monterey Blue 6MT/Touring/Sport/Nav F.I. CBE CF w/ 12" Res | V1 | SecondSkin | Stillen G3 | EVO-R CF B-Pillars | Volk GT-S Ti Gunmetal 19x9.5 +30 F, 19x10.5 +8 R | Swift Spec-R Springs |
![]() |
![]() |
#6 (permalink) |
Enthusiast Member
![]() Join Date: Jun 2010
Location: Independence
Posts: 388
Drives: 10 370Z BS 6 SP
Rep Power: 15 ![]() |
![]()
without bothering to read the manual or research/look up the numbers
one can feel where the powerband is I need to work on smooth acceleration at a track day you would think you'd eat him up alive |
![]() |
![]() |
#8 (permalink) |
A True Z Fanatic
Join Date: Jul 2010
Location: window seat
Posts: 28,940
Drives: Mostly on two wheels
Rep Power: 120 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
If you were doing a 70mph roll, wouldn't you want to be in 3rd? I've had my Z mostly on low speed roads, but I think 4th might be too tall for a 70mph pull.
|
![]() |
![]() |
#9 (permalink) |
A True Z Fanatic
|
![]()
At 70mph, the Z pulls much harder in 3rd than 4th. With winter tires though, VDC will activate in either of those gears. It's not until 5th gear that you can put the pedal flat and not get a VDC light flashing
__________________
2013 Cadillac V-Wagon, RIP Z |
![]() |
![]() |
#10 (permalink) |
Base Member
Join Date: Nov 2009
Location: N. Bethesda, MD
Posts: 162
Drives: 09 370z BS 6MT
Rep Power: 3387 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Yeah as far as I can tell, torque is almost constant throughout the RPM range, so you should basically put the car into the lowest gear that isn't redlining at your current speed and keep it there to redline. At 70, that would be 3rd. And yeah I got winter tires on currently as well, and when I drop it into 3rd and gun it, vdc is on almost constantly, so it's sort of pointless to try.
__________________
Consequences will never be the same. |
![]() |
![]() |
#11 (permalink) |
A True Z Fanatic
Join Date: Jul 2010
Location: Newport Beach
Posts: 3,900
Drives: 2010 370Z/Saab 900se
Rep Power: 432 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
LOL, drive under the speed limit and be even safer!
__________________
-320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob |
![]() |
![]() |
#12 (permalink) | |
A True Z Fanatic
Join Date: Jun 2010
Location: SWMO
Posts: 4,454
Drives: 2019 CX5 GT Reserve
Rep Power: 7627 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
As to what gear to be in, I used to just put my car in 4th (LS1, not a V6) and just floor it. Even from 60. Usually, the 911 or mustang or whatever I was racing would ease out on me by a car or so and I would reel it in and walk on by. It didn't seem to matter a whole lot unless the race was going to be over by 100mph or something. Of course, I don't know how you guys play your video games. That's how I played mine. Last edited by ImportConvert; 02-16-2011 at 05:32 PM. |
|
![]() |
![]() |
#14 (permalink) |
A True Z Fanatic
Join Date: Jul 2010
Location: Virginia
Posts: 1,134
Drives: 2009 Touring Sp Nav
Rep Power: 17 ![]() |
![]()
Since torque is flat from about 2500RPM to redline, you really want to drop as low as possible assuming you will stay in gear longer than the next shift - at 70MPH you will be about 5300RPM in 3rd and can run up to about 95MPH before shifting (about 4.5 seconds), so definitely the right choice if you have the traction. (I'll assume you can shift faster than 4.5 seconds with the 6MT
![]() Hmmm - need to figure out how to convert torque in gears to acceleration to compute time to estimate the difference more accurately. I really need to post my Torque in Gears spreadsheets!
__________________
2014 Cayman S PDK Sport Chrono White/Black Was 2009 370Z Touring Sport+Nav 7AT Metallic Black/Persimmon Was 1991 NSX Auto Black/Black Last edited by wilsonp; 02-16-2011 at 06:08 PM. |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
**NEW BLOX Racing 490LE Spherical Shift Knobs IN STOCK!!** | SE | Body Interior/Exterior | 79 | 01-09-2012 11:06 PM |
Shift Knobs Galore - Blox 490, ARC Spherical, Carbing High-Grip, and Key!s Racing! | DriveLineEric | Body Interior/Exterior | 28 | 04-19-2011 06:17 PM |
**NEW BLOX Racing 490LE Spherical Shift Knobs IN STOCK!!** | SE | SpeedElement | 0 | 07-27-2010 05:02 PM |
Who needs a powerband? G35 Beast | Tray@Forged | Forged Performance | 3 | 05-07-2010 03:27 PM |
370z powerband vs. 350z powerband | bmarcinczyk14 | Nissan 370Z General Discussions | 43 | 08-12-2009 09:00 AM |