Over-Revved, Am I gonna be ok ?????

wilsonp · 02-15-2011, 11:44 PM

Does anyone else wonder whether some people should drive these cars?

(Not OP, but the ignorance about how this stuff works by some others...

)

Jordo! · 02-15-2011, 11:44 PM

I would see if someone can check the valves (not sure if it's a different can of worms on this motor).

Any misfires? Extra valve chatter? CEL?

Super Tanooki · 02-15-2011, 11:47 PM

I've not long lived in the US and still getting used to shifting with my right hand. I almost did it once trying to shift down from quickly from 5-4, and since then I've decided to give it a couple months of gentle, slow shifts to fully get accustomed to right-hand shifting before I start throwing the gears around again.

jaedub · 02-16-2011, 01:03 AM

ouch. Thats a big punch to your engine. Im sure its gonna be okay but miss shifting in high rpm is crucial

samb03 · 02-16-2011, 01:19 AM

Quote:

Originally Posted by RockStarKick

I missed a 3rd to 4th shift and went to second in my 90 Mustang GT with 3.73 gears in the rear. The motor hit red line but the crappy part was the back tires just drug so much that the car just started to slide like crazy.. Imagine doing 70 and locking the parking brake.. That's what it was like..

your post reminded me of high school. A friend of mine had 12 in glass packs on a 84 chevy pick up. That is how he would rack off is pipes.3-2 at the top of 3 some times 4-2 most of the way through 4th. If he couldn't pull it into gear. He would stand up put both hands on the gear shift and drop on it so cram it in. He did this into reverse from 35mph. Only he stabbed the gas. The rear wheels slid for about 20 ft then bunny hopped for another 20ft. changed direction and roasted the off to get back to were he passed me on the side of the road.All of this with out lifting off the throttle. I was walking when he noticed me. That was the quickest way to give me a lift.

Oh to be young and dumb. That was a seriously tough truck. chevy 305 bone stock except for dual exhaust and a 4 speed with granny gear. They don't make 'em like that anymore.

Red__Zed · 02-16-2011, 01:38 AM

ImportConvert · 02-16-2011, 06:16 AM

Quote:

Originally Posted by tonybui

I was going 70mph and were going into 4th but mis-shifted and went in to 2nd

It made horrible sound, I Immediately clutch in and get out of 2nd. Next morning I was paranoid and "felt" like the car was losing power but idk if its in my head or what .... Is the car gonna be ok ??

I did that a few times until I learned how to shift a 6-speed with a factory shifter the right way. I always invert my hand on the 2-4 shift and that keeps you from pulling towards your body and hitting 2nd. I did it in a car with pushrods. Nothing bent and it was fine. If you had truly screwed the shift bad, you would have broken the rear-tires loose and made comment about barely keeping it out of the ditch--or not.

That being said...

The wheel bearings and axles did go out on that car, and the pinion-bearing spun. This happened 5-10K miles after the missed shift. Did it cause it? Maybe, maybe not. It sure didn't help the situation.

Only time will tell. I do think it may have shocked/misaligned the pinion bearing and led to the failure over time. Just my personal guess.

TongMan · 02-16-2011, 09:49 AM

You should be happy that you didn't hear a boom from the engine bay.

houkouonchi · 02-16-2011, 10:06 AM

You are probably ok if you were only going 70. You were likely not over-revving it by all that much. By my calculations it should have only been about 8166 RPM.

kenchan · 02-16-2011, 10:22 AM

Quote:

Originally Posted by tonybui

I was going 70mph and were going into 4th but mis-shifted and went in to 2nd

It made horrible sound, I Immediately clutch in and get out of 2nd. Next morning I was paranoid and "felt" like the car was losing power but idk if its in my head or what .... Is the car gonna be ok ??

That's a quick way to kill the engine. The limiter doesn't work in this case if you mechanically over rev.

shadoquad · 02-16-2011, 10:45 AM

Quote:

Originally Posted by wilsonp

Does anyone else wonder whether some people should drive these cars?

(Not OP, but the ignorance about how this stuff works by some others...

)

spearfish25 · 02-16-2011, 11:57 AM

The Z can heal itself over time. Just give it some time.

Red__Zed · 02-16-2011, 12:36 PM

Quote:

Originally Posted by spearfish25

The Z can heal itself over time. Just give it some time.

shadoquad · 02-16-2011, 12:39 PM

kenchan · 02-16-2011, 01:29 PM

I never understood the meaning of this bunny with dorayaki on its head....

02-15-2011, 11:44 PM	#16 (permalink)
wilsonp A True Z Fanatic Join Date: Jul 2010 Location: Virginia Posts: 1,134 Drives: 2009 Touring Sp Nav Rep Power: 17	Does anyone else wonder whether some people should drive these cars? (Not OP, but the ignorance about how this stuff works by some others... ) __________________ 2014 Cayman S PDK Sport Chrono White/Black Was 2009 370Z Touring Sport+Nav 7AT Metallic Black/Persimmon Was 1991 NSX Auto Black/Black

02-15-2011, 11:44 PM	#17 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	I would see if someone can check the valves (not sure if it's a different can of worms on this motor). Any misfires? Extra valve chatter? CEL? __________________ Enjoy it. Destroy it.

02-16-2011, 11:57 AM	#27 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1856	The Z can heal itself over time. Just give it some time. __________________ 2013 Cadillac V-Wagon, RIP Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Awesome movie its gonna be! (Sucker Punch)	daisuke149	Movies / Celebrity Gossip / Entertainment / Music	10	12-13-2010 10:48 PM
Help! Am I gonna be too lean?	Dwilly	Tuning	3	11-30-2010 05:41 PM
So who's gonna do the first custom wide body?	BLUESLATE	Exterior & Interior	58	01-26-2010 06:34 PM
I'm gonna party like it's my birthday because...it IS	bigaudiofanat	The Lounge (Off Topic)	19	06-30-2009 12:01 AM
Gonna have a awesome Car with no place to drive	moondoggy	Nissan 370Z General Discussions	16	04-13-2009 09:59 PM

02-15-2011, 11:47 PM	#18 (permalink)
Super Tanooki Base Member Join Date: Jul 2010 Location: Las Vegas Posts: 217 Drives: 370Z MT Base/Spt Red Rep Power: 15	I've not long lived in the US and still getting used to shifting with my right hand. I almost did it once trying to shift down from quickly from 5-4, and since then I've decided to give it a couple months of gentle, slow shifts to fully get accustomed to right-hand shifting before I start throwing the gears around again.

02-16-2011, 01:03 AM	#19 (permalink)
jaedub Track Member Join Date: Aug 2010 Location: Los Angeles Posts: 906 Drives: 2010 Black 370Z MT Rep Power: 305	ouch. Thats a big punch to your engine. Im sure its gonna be okay but miss shifting in high rpm is crucial

02-16-2011, 01:38 AM	#21 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 120

02-16-2011, 09:49 AM	#23 (permalink)
TongMan A True Z Fanatic Join Date: Feb 2010 Location: NorCal Posts: 1,297 Drives: 2013 Nissan GTR Rep Power: 715	You should be happy that you didn't hear a boom from the engine bay.

02-16-2011, 10:06 AM	#24 (permalink)
houkouonchi Enthusiast Member Join Date: Jun 2010 Location: Ontario, California Posts: 440 Drives: '14 GT-R '10 M6 370z Rep Power: 15	You are probably ok if you were only going 70. You were likely not over-revving it by all that much. By my calculations it should have only been about 8166 RPM.

02-16-2011, 12:39 PM	#29 (permalink)
shadoquad A True Z Fanatic Join Date: Apr 2010 Location: . Posts: 42,608 Drives: . Rep Power: 3886

02-16-2011, 01:29 PM	#30 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	I never understood the meaning of this bunny with dorayaki on its head....