Finally - A good good jack stand for DIYers

KaienZ34 · 03-05-2011, 11:52 AM

Quote:

Originally Posted by Xander117

Im from GA I thought you were suppose to use cinder blocks and a couple 2x4's....

That always works well.

carguy · 03-05-2011, 12:04 PM

Quote:

Originally Posted by ol240z

Found this pic on the IMGT3 web site blog, but not for sale. New look? How much?

Called them yesterday and they said they would have pricing done next week. Talked with Chris and he told me $329 for a pair and he's checking on a pair for me. He mentioned a free shipping deal was going to be offered for the first 30 days its available.

BTW, i have a friend with a 944s that has them, i took this picture with my phone because i was so impressed by the stability and workspace when you use two. I know they seem expensive but you just can't compare them to the $50 set from Sears. there in a class all there own!

one mans opinion!

Carguy

ol240z · 03-06-2011, 11:25 PM

Quote:

Originally Posted by Xander117

Im from GA I thought you were suppose to use cinder blocks and a couple 2x4's....

....to support your '77 Plymouth station wagon - yes, but by cinder block and 2x4 standards

you're not supposed to even be driving a Z

Please tell me your Z at least deserves a hockey puck!

1slow370 · 03-07-2011, 12:22 AM

lets all just do it like the yards and just pick it up with a forklift. Takes like 5 seconds and you never need car dollies, also make parking multiple vehicles in on driveway easy.

KaienZ34 · 03-07-2011, 12:56 AM

Quote:

Originally Posted by 1slow370

lets all just do it like the yards and just pick it up with a forklift. Takes like 5 seconds and you never need car dollies, also make parking multiple vehicles in on driveway easy.

kenchan · 03-07-2011, 04:32 PM

carguy that picture just gives me the creeps... it still looks so unstable with that huge opening on one side for the jack...just waiting to collapse.

but i suppose one wouldn't be convinced until seeing one in person.

lol at using cinder blocks and forklift.

ol240z · 03-08-2011, 01:13 AM

Quote:

Originally Posted by kenchan

carguy that picture just gives me the creeps... it still looks so unstable with that huge opening on one side for the jack...just waiting to collapse.

but i suppose one wouldn't be convinced until seeing one in person.

lol at using cinder blocks and forklift.

it's a stand rated to ANSI standards at 4000 lbs. that means a single stand has to support 6000 lbs. wouldn't want to try that with a cinder block.

kenchan · 03-08-2011, 07:58 AM

Quote:

Originally Posted by ol240z

it's a stand rated to ANSI standards at 4000 lbs. that means a single stand has to support 6000 lbs. wouldn't want to try that with a cinder block.

Yah, don't get me wrong I ld be getting it when it comes time to replacing or adding more stands in my garage. I like the idea and conveninece! These days convenience is key.

carguy · 03-09-2011, 06:32 PM

Quote:

Originally Posted by kenchan

carguy that picture just gives me the creeps... it still looks so unstable with that huge opening on one side for the jack...just waiting to collapse.

but i suppose one wouldn't be convinced until seeing one in person.

lol at using cinder blocks and forklift.

Sorry kenchan for leaving you out in the cold and not replying. I understand where you're coming from. I've got to tell you that when I went up to the car to touch it I was a little tentative, but I could put my shoulder into it and the car was firmly planted. It was not moving an inch. they're really a very high-tech product. My buddy who bought them is a real geek for new toys. But he researches the pants off of things before he buys. this product has a special aluminum magnesium blend, with variable thicknesses in the walls, Developed in a lab somewhere. That's why it works I guess! cheers

ol240z · 09-08-2011, 11:23 PM

So there's a new video posted on the Jackpoint jackstands.
Jackpoint Jackstands demo on Corvette C5.wmv - YouTube

This time the car is a Corvette. I've seen lots of different cars on these things but no Z's. I guess it's time to get out my camera. Anybody know how to post Poloroids on the web?

BeachZTT · 09-09-2011, 09:25 AM

Quote:

Originally Posted by ol240z

This time the car is a Corvette. I've seen lots of different cars on these things but no Z's. I guess it's time to get out my camera. Anybody know how to post Poloroids on the web?

You just hold them up to the monitor. They transfer automatically.

ol240z · 09-09-2011, 11:23 AM

Quote:

Originally Posted by BeachZTT

You just hold them up to the monitor. They transfer automatically.

2 shot.jpg

SHAZAM!

just kidding

KaienZ34 · 09-09-2011, 12:30 PM

Same vid with the vette, i just embedded it.

ol240z · 09-27-2011, 02:06 AM

Well yes, imbedding the video is much nicer, but uh I just couldn't figure that one out. Poloroid generation - remember? The only thing I know how to sync is a pair of SU carbs.

lunaman63303 · 05-22-2012, 01:37 PM

To save people some time hunting, here are the recommended jack points from the service manual.

03-07-2011, 12:22 AM	#49 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	lets all just do it like the yards and just pick it up with a forklift. Takes like 5 seconds and you never need car dollies, also make parking multiple vehicles in on driveway easy. TreeSemdyZee likes this. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Jack Stand Question	spearfish25	Nissan 370Z General Discussions	143	10-16-2015 12:30 PM
I finally found a wax good enough for the Z	torpedo2k	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	24	03-05-2011 10:02 PM
Rear jack stand points	tjlazer	Brakes & Suspension	7	08-26-2010 12:34 PM
The Saga of Big Red; the little jack stand that could!	binto100	Nissan 370Z General Discussions	18	05-19-2010 02:52 PM

03-07-2011, 04:32 PM	#51 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	carguy that picture just gives me the creeps... it still looks so unstable with that huge opening on one side for the jack...just waiting to collapse. but i suppose one wouldn't be convinced until seeing one in person. lol at using cinder blocks and forklift.

09-08-2011, 11:23 PM	#55 (permalink)
ol240z Base Member Join Date: Jan 2011 Location: chicago Posts: 26 Drives: '71 240 Rep Power: 14	So there's a new video posted on the Jackpoint jackstands. Jackpoint Jackstands demo on Corvette C5.wmv - YouTube This time the car is a Corvette. I've seen lots of different cars on these things but no Z's. I guess it's time to get out my camera. Anybody know how to post Poloroids on the web?

09-09-2011, 12:30 PM	#58 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	Same vid with the vette, i just embedded it.

09-27-2011, 02:06 AM	#59 (permalink)
ol240z Base Member Join Date: Jan 2011 Location: chicago Posts: 26 Drives: '71 240 Rep Power: 14	Well yes, imbedding the video is much nicer, but uh I just couldn't figure that one out. Poloroid generation - remember? The only thing I know how to sync is a pair of SU carbs.