Larger Mass Air Flow

Vegitto-kun · 01-05-2011, 05:22 PM

Quote:

Originally Posted by bullitt5897

It will all be released with my car. Conjecture says something along the lines of a piggyback or standalone unit to control VVEL. Sam has some big things in store *cough* possibly some N/A monsters

*cough* you didnt hear it from me!!!! I wasnt even here!!!

the only GTM thing I might buy for my car

WarmAndSCSI · 01-05-2011, 06:14 PM

Quote:

Originally Posted by bullitt5897

SCSI is right we were going to stay with stock sized MAFs but then revised our plans since we are looking at beyound 1000rwhp. look at it this way... if the stock MAFs are good for 500hp turbo cars you arent going to need bigger ones on a N/A car... Tunning will provide the best bang for the buck and with GTM's 1st unit coming out this month you better believe your gonna want some!

Correct me if I'm wrong, but doesn't every forced induction kit for the 370Z place the MAF sensor post-turbo? They're measuring pressurized airflow then and thus have a greater capacity to measure mass flow, depending on exactly how much boost pressure you're running.

With Evo's, STi's and other factory turbo cars, the MAF is positioned pre-turbo so they are measuring air at atmospheric pressure; and that's also why we often need to upgrade MAF housings to accommodate for larger-than-stock turbo setups.

So, for the 370Z, it would only make sense to upgrade the MAF housings if you were looking to make more than 450-500 bhp N/A or 900-1000 bhp force inducted, roughly speaking.

Junior370z · 01-05-2011, 06:48 PM

Quote:

Originally Posted by bullitt5897

It will all be released with my car. Conjecture says something along the lines of a piggyback or standalone unit to control VVEL. Sam has some big things in store *cough* possibly some N/A monsters

*cough* you didnt hear it from me!!!! I wasnt even here!!!

Will you start or already have a thread on the progress of this project? I want to subscribe. Maybe not since it's still a hush hush thing?

pokeyl · 01-05-2011, 06:55 PM

If I can get to 425-450 NA I'm going there.

Vegitto-kun · 01-05-2011, 06:58 PM

poor people who purchased a turbo to get those numbers while we don't.

sure you can say they got those too but even if they can now easily go higher than say 600 they will most likely need to strengthen the engine so NA guys win.

chops · 01-06-2011, 01:37 AM

*shrug* i dont know much about the VQ engines...but i seriously doubt you can hit 425-450 NA @ the crank, much less at the wheels. VVEL tuning may give us some decent gains, but think ~10% tops.

Footloose301 · 01-06-2011, 07:34 AM

Quote:

Originally Posted by chops

*shrug* i dont know much about the VQ engines...but i seriously doubt you can hit 425-450 NA @ the crank, much less at the wheels. VVEL tuning may give us some decent gains, but think ~10% tops.

Agreed.

Full bolt ons and a GTM tune touched by God still won't get you 450.

Junior370z · 01-06-2011, 08:57 AM

Yeah I don't think it will be a 425-450 gain but it should be a considerable gain. Like throwing in a set of racing cams, ignition sys an a good tune. (diff eng of course) It's more complicated than that but you get the picture.

01-06-2011, 08:57 AM	#23 (permalink)
Junior370z A True Z Fanatic Join Date: Apr 2009 Location: Las Vegas Age: 50 Posts: 1,024 Drives: over the speed limit Rep Power: 293	Yeah I don't think it will be a 425-450 gain but it should be a considerable gain. Like throwing in a set of racing cams, ignition sys an a good tune. (diff eng of course) It's more complicated than that but you get the picture. __________________ DON'T DO IT! ( Click to show/hide ) Stillen CBECAI-U/D PulleyGround KitSwaysSetrab Oil CoolerIchiba Rear Camber KitAgility CoiloverBerk HFCTechnosquare TuneGT-R ButtonVenaci MeshSP Performance Cross Drilled/Slotted RotorsSPC Toe BoltsBomex LipMud flapsAero Jacket Type III WingSold Last edited by Junior370z; 01-06-2011 at 09:04 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pics of Rays sport wheels with larger tires??	Nubz	Wheels & Tires	23	03-04-2016 02:18 PM
Mass/Rhode Island	motaboata	North East Region	19	04-15-2014 03:17 PM
Larger Oil Cooler Fitment	TrackRat	STILLEN	4	09-16-2010 11:52 AM
hello from Mass.	BOBz	New Forum Member	6	08-11-2009 01:38 PM
Stillen Larger core oil cooler?	import111	Engine & Drivetrain	4	07-09-2009 01:08 PM

01-05-2011, 06:55 PM	#19 (permalink)
pokeyl Track Member Join Date: Nov 2010 Location: DFS Posts: 900 Drives: ??? Rep Power: 55	If I can get to 425-450 NA I'm going there.

01-05-2011, 06:58 PM	#20 (permalink)
Vegitto-kun A True Z Fanatic Join Date: Feb 2010 Location: USA Posts: 2,011 Drives: 09 370Z Rep Power: 262	poor people who purchased a turbo to get those numbers while we don't. sure you can say they got those too but even if they can now easily go higher than say 600 they will most likely need to strengthen the engine so NA guys win.

01-06-2011, 01:37 AM	#21 (permalink)
chops A True Z Fanatic Join Date: Oct 2010 Location: NA Posts: 1,732 Drives: NA Rep Power: 22	shrug i dont know much about the VQ engines...but i seriously doubt you can hit 425-450 NA @ the crank, much less at the wheels. VVEL tuning may give us some decent gains, but think ~10% tops.