Has anyone looked @ the Handfree volume adjustment in the hidden settings or hidden detailed settings menu?

I suspect that the 370 has the same system as my GT-R, so give this a go.

Turn car to on or accessory.

Turn Audio off (press volume knob in).

Press and hold settings button (if acknowledgment screen comes up .. go ahead and acknowledge, and then press and hold settings button again).

Turn volume knob approx 20 clicks in either direction ... without pressing it IN (i.e. do not turn audio on).

That should get you to the diagnostic and settings page ... if you want the detailed settings .. while on the first page .. do the sequence a again (settings + ~20 clicks) and it will the change to a (detailed) settings page ... on the handfree subpage page is a volume adjustment.

Secondly, I have removed and cracked the HD password and put a larger HD in my Musicbox .... are there any coders out there that could find a Software way to remove the speed sensor related to NAV and other control functions locked out while moving?

K-D

I have the 2010 model and I will try this detailed settings procedure tomorrow.

As for the speed sensor hack, in my IS350, I had to cut the speed sensor wire from behind the nav and ground it to make it seem like my speed was at 0. That was the only way to trick the car into thinking it was parked.

I haven't had the chance to look yet but, where is the hard drive for the music box located in the Z?

Cool! I just did this and adjusted the volume up. I also screwed around with some of the other menus including calibrating my screen. +rep :tup:

http://i271.photobucket.com/albums/j...n/IMG_1902.jpg

http://i271.photobucket.com/albums/j...n/IMG_1903.jpg

http://i271.photobucket.com/albums/j...n/IMG_1907.jpg

/self-congratulatory back pat .... I got rep'ed for my first post YiPee!

The HD is located inside the headunit.

Be aware that the HD is password protected using the ATA password standard (same thing a setting a HD password in BIOS on a laptop.)

I had to learn that standard and then us a logic analyzer to capture my head-unit's power exchange with the HD to reverse crack the password.

You can see the contents of the HD and other information here(s):

http://www.nagtroc.org/forums/index....dpost&p=385111

http://www.nagtroc.org/forums/index....dpost&p=388865

http://www.nagtroc.org/forums/index....dpost&p=388992

http://www.nagtroc.org/forums/index....dpost&p=389863

your steps worked great, thanks! i took a few pictures of the 2010 update...i didn't really change any settings and completely forgot there was a detailed settings page...i'll check again tomorrow and play around a bit more, it was pretty cold out there!

PS - i did try pressing Up, Up, Down, Down,, Left, Right, Left, Right, B, A, Start on the nav panel but it didn't give me unlimited gas or an indestructible 370z...DAMN!

ROFLMA @ "PS - i did try pressing Up, Up, Down, Down,, Left, Right, Left, Right, B, A, Start on the nav panel but it didn't give me unlimited gas or an indestructible 370z...DAMN!"

Going Contra on the Z doesn't have the same effect as it used too :)

*******

Different car but similar if not same musicbox/head-unit, so here is a ? I posted over on NAGTROC ... maybe you guys can comment?

My iPhone 3G worked wonderfully well (with regards to docking undocking) prior to the 3.0 release.

2009 Model August Delivery no updates to NAV

NOTE: I use a Scosche Passport for power conversion.

I could plug it in with the car in any state (off, ACC, ON, Radio on, Radio off) and it would always recgnize it.

Once I upgraded to 3.0 on the iPhone it became more troublesome, behaving decent about the half the time, the other half the time it would show "iPod not connected" and wouold require a plug and unplug or two.

Now that I finally got to 3.1 code on the iPhone I have been able to get it recognized by the head unit once in about 15 connections, and only then If I unlock the phone, plug it in with car off, and the apply power to car while phone is still unlocked.

It never recognizes it with a unplug/plug while the car is on/running ... meaning If I finally get it recognized and have to unplug it for some reason....I am with iPod until I can turn the car off and reconnect using the above procedure what seems like a few hundred times.

I have taken an older iPod and connected up and it works/is recognized in ALL situations .... so I do not think it is the cable.

Is anyone else having issues with 3.1 (or 3.0) coded iPod/iPhone devices?

TIA,

K-D

Wow yours looks a lot different than mine. I wonder if it's simply a DVD update or is the entire system different?

3Gs here, one issue the only thing you can't do is transfer the number but otherwise everything else works.

how long have these navs been out? if they've only been out since the 2009 370Z, then i would imagine it would just be a firmware update on DVD...do you have that option to configure your "sideview" and rear backup cam? also, i have the option to pick different "theme" colors other than black, i'm not sure if that option was available on the last version nav software

ps - what is a sideview cam? i have never seen a car with a camera on the side

Krowten-Dog, i've only had my car for less than a week so far but my iPhone 2G, 3G, and 3GS have worked flawlessly, all of them on 3.1.2 firmware and jailbroken...at first i did have issues with the HU recognizing the phones via Belkin cable but later i realized the cable was only for charging and not for synching...as soon as i switched to the original Apple cable, it recognized the phones just fine...i've also tried it with a 1st and 2nd gen iPod Nano and my gf's 30GB iPod video and they too work flawlessly...i've not yet tried connecting to the RCA video/audio inputs, however, since don't have one of those stereo mini-plugs to RCA cables

Rasengan can you please post up your software version.
I'd like to upgrade to your version but I'm wondering if your
nav system is a whole different version than mine.

I just have that version info from the service menu...here's clearer picture

^^thanks I'm wondering why they gave
me version 8.3 as I don't see anything
close in your version. I don't want
to pay $130 for a few street names.