Takeda ?

toxik · 11-05-2010, 12:14 PM

Quote:

Originally Posted by LightsOut

I have Takeda intakes but for my G37.

Do I feel improvement over stock...no
Do I feel a Loss...no
Do I feel heat soak...no
I sometime feel the car pools better at certain RPM and Gear.

I've only had them a week now, and I'm still going to give it time to figure out if I like them or not.

I kinda wish thought the filter design were like JWT pop chargers.

I agree with this, there's no HP loss... I only have positive things to say about it. At the same time I would NEVER pay $300 for new set of short ram intakes. I got mine for dirt cheap from theDreamer, and that alone is worth it. I don't have any hp loss, I feel the car pulling better in the top end. They sound awesome, and honestly that's all I wanted. I'm not building a track monster or anything. I want something really cool like a CF intake, I feel like all the intakes out for our cars are so blah and boring, they don't make your engine bay look good at all. I'm holding over with Takedas until then.

kenchan · 11-05-2010, 12:24 PM

i like how the venturi's have the inlet at the tip of the cone too...but those cones are too wide to begin with imho. if they make 'em narrower a regular KN cone works just fine if not better.

TBSS2008 · 11-05-2010, 12:54 PM

The only problem with any of the Short Ram Intakes is sucking in hot air from the engine bay. The SRI flow really well from lack of restriction (Short intake tube with very little bends and big Cone Filter).

Almost every other car I have owned has some kind of SRI with a nice heat shield box providing the filter with cold air. I have yet to see a SRI for the 370z that has a heat shield box. There are some with heat shields but...it would be nice to see a company create a CAI box for a SRI.

I have the stock box setup with the Takeda Intake tubes. But the drop in AFE filters and stock box design are just too restrictive however it does provide cold air +8-10 over ambient.

Only SRI I would consider for the 370z:
K&N Typhoon
RC2 MaxFlow

LightsOut · 11-05-2010, 01:09 PM

Quote:

Originally Posted by toxik

I agree with this, there's no HP loss... I only have positive things to say about it. At the same time I would NEVER pay $300 for new set of short ram intakes. I got mine for dirt cheap from theDreamer, and that alone is worth it. I don't have any hp loss, I feel the car pulling better in the top end. They sound awesome, and honestly that's all I wanted. I'm not building a track monster or anything. I want something really cool like a CF intake, I feel like all the intakes out for our cars are so blah and boring, they don't make your engine bay look good at all. I'm holding over with Takedas until then.

I also got mine used. I'll let someone else pay full price for them.

Liquid_G · 11-05-2010, 01:37 PM

In general though, has anyone ever gotten an Intake temp reading using short ram intakes? I know for a fact that with my Stillen gen3 itakes, I usually see 7-8 degress above ambient temp while moving cruising on the highway. Seen using my Bullydog Gauge tuner thing..

toxik · 11-05-2010, 01:48 PM

Quote:

Originally Posted by Liquid_G

In general though, has anyone ever gotten an Intake temp reading using short ram intakes? I know for a fact that with my Stillen gen3 itakes, I usually see 7-8 degress above ambient temp while moving cruising on the highway. Seen using my Bullydog Gauge tuner thing..

Anyone measuring intake temps should have no business buying Short rams anyways, if you have the money to buy a Bullydog or any other tuner, you should've spent that money on CAI instead.... in other words I doubt it.

I do somewhat remember someone mentioning on this forum how theyre intake temps on an SRI (not sure if Takeda) would go up in traffic, but as soon as the car started driving at highway speeds, it would go back down and cool off quite quickly.

LightsOut · 11-05-2010, 02:16 PM

it was a takeda intake...Its the memeber who hacked up his takeda pipes to fit his oem air box.

elmz · 11-05-2010, 02:41 PM

Go cold air, the Z runs pretty hot.

TBSS2008 · 11-05-2010, 03:27 PM

Quote:

Originally Posted by Liquid_G

In general though, has anyone ever gotten an Intake temp reading using short ram intakes? I know for a fact that with my Stillen gen3 itakes, I usually see 7-8 degress above ambient temp while moving cruising on the highway. Seen using my Bullydog Gauge tuner thing..

Yes I still have the Takeda AFE Filters and the Intake tubes so basically I can go back to a SRI from the Stock Box + Intake Tube setup. Cruising on the highway is not that bad about +12F over ambient and responsive as hell. Its traffic, slow driving, and summer heat that kills the SRI. It’s usually +15-20F over ambient when driving below 40mph (slow traffic).

But what is interesting is how quickly the temps drop when you hammer it from a stop light. I have seen it go from 130F IAT to 75F on a 60F day by the time I hit 80mph. Basically hammering it will vacuum (suck) out the hot air that has been sitting in the engine bay then as the car moves faster fresh air starts flow through the engine bay and baths the filters with cooler air.

Tonight is Track night for me. I have the SRI setup right now and am hoping to run high 12s with the new M370 Manifold. I want to see how a SRI does at the track I am still on the fence on which intake setup makes my Z faster. Next Wednesday I am going back to try the Stock Box + Intake Tube setup to compare.

GZ3 · 11-05-2010, 05:24 PM

Quote:

Originally Posted by TBSS2008

Yes I still have the Takeda AFE Filters and the Intake tubes so basically I can go back to a SRI from the Stock Box + Intake Tube setup. Cruising on the highway is not that bad about +12F over ambient and responsive as hell. Its traffic, slow driving, and summer heat that kills the SRI. It’s usually +15-20F over ambient when driving below 40mph (slow traffic).

But what is interesting is how quickly the temps drop when you hammer it from a stop light. I have seen it go from 130F IAT to 75F on a 60F day by the time I hit 80mph. Basically hammering it will vacuum (suck) out the hot air that has been sitting in the engine bay then as the car moves faster fresh air starts flow through the engine bay and baths the filters with cooler air.

Tonight is Track night for me. I have the SRI setup right now and am hoping to run high 12s with the new M370 Manifold. I want to see how a SRI does at the track I am still on the fence on which intake setup makes my Z faster. Next Wednesday I am going back to try the Stock Box + Intake Tube setup to compare.

hey man!! i will see you out there tonight! i will be in a PW 370Z

JB1 · 11-05-2010, 10:51 PM

Some more Takeda And air intake temp info: Takeda intakes and Scangauge info
I now have Cobb post MAF hoses and K&N filters and I think this combo works better then the Takeda intakes. But I have to admit the Takeda intakes did sound better.

LightsOut · 11-10-2010, 01:11 PM

2 weeks now with my takeda intake.

feels like the ecu is getting used to the air flow or the its just the colder climate change, but my car feels like it has a little more kick to it. The sound has has been a louder as well.

CATCHINZZZS · 01-17-2011, 08:48 PM

I myself just purchased a Fujita for a G37 second hand crazy cheap. Wasnt about to dish crazy $$. Which happens to be same as Takeda in my OP. Due to everyone talkin about heat. I then had painted the pipes black with high heat ceramic paint. Figure I give it a shot to see if it helps. I also opened the stock airbox and left the the other half that goes towards the front in stock location. Figure I use it as incomin air in stock form on OEM setup....Didnt cost much so i really not losin Will post later on to see if i gained any progress in this. Will also try and get pics..

11-05-2010, 01:37 PM	#20 (permalink)
Liquid_G A True Z Fanatic Join Date: Aug 2009 Location: Chicago Burbs Posts: 1,439 Drives: 09 370z Supercharged Rep Power: 44	In general though, has anyone ever gotten an Intake temp reading using short ram intakes? I know for a fact that with my Stillen gen3 itakes, I usually see 7-8 degress above ambient temp while moving cruising on the highway. Seen using my Bullydog Gauge tuner thing.. __________________

11-05-2010, 10:51 PM	#26 (permalink)
JB1 Track Member Join Date: Mar 2009 Location: Chicagoland Posts: 748 Drives: 09 Nissan 370Z sold Rep Power: 17	Some more Takeda And air intake temp info: Takeda intakes and Scangauge info I now have Cobb post MAF hoses and K&N filters and I think this combo works better then the Takeda intakes. But I have to admit the Takeda intakes did sound better. __________________ Black Fangs // Black rear Valance // Berk CBE // COBB post MAF tubes // K&N drop in filters // Setrab Oil Cooler // Stillen Sway bars // Z1 SS brake lines // Stillen brake cooling kit // Harness bar //

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB Takeda SRI	Kastley85891	Wanted	4	05-09-2010 01:56 PM
FS: Takeda Intakes	JB1	Parts for sale (Private Classifieds)	24	03-31-2010 11:56 AM
FS Takeda Intake	M.J.	Parts for sale (Private Classifieds)	7	12-04-2009 03:11 PM

11-05-2010, 12:24 PM	#17 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	i like how the venturi's have the inlet at the tip of the cone too...but those cones are too wide to begin with imho. if they make 'em narrower a regular KN cone works just fine if not better.

11-05-2010, 02:16 PM	#22 (permalink)
LightsOut Base Member Join Date: Nov 2010 Location: 323-909 Posts: 68 Drives: Low n Aggressive 4Dr Rep Power: 15	it was a takeda intake...Its the memeber who hacked up his takeda pipes to fit his oem air box.

11-05-2010, 02:41 PM	#23 (permalink)
elmz Track Member Join Date: Feb 2009 Location: San Diego, CA Posts: 674 Drives: 2014 Porsche Boxster Rep Power: 17	Go cold air, the Z runs pretty hot.

11-10-2010, 01:11 PM	#27 (permalink)
LightsOut Base Member Join Date: Nov 2010 Location: 323-909 Posts: 68 Drives: Low n Aggressive 4Dr Rep Power: 15	2 weeks now with my takeda intake. feels like the ecu is getting used to the air flow or the its just the colder climate change, but my car feels like it has a little more kick to it. The sound has has been a louder as well.

01-17-2011, 08:48 PM	#28 (permalink)
CATCHINZZZS Base Member Join Date: Jan 2011 Location: NYC Posts: 221 Drives: 2010 370Z Rep Power: 14	I myself just purchased a Fujita for a G37 second hand crazy cheap. Wasnt about to dish crazy $$. Which happens to be same as Takeda in my OP. Due to everyone talkin about heat. I then had painted the pipes black with high heat ceramic paint. Figure I give it a shot to see if it helps. I also opened the stock airbox and left the the other half that goes towards the front in stock location. Figure I use it as incomin air in stock form on OEM setup....Didnt cost much so i really not losin Will post later on to see if i gained any progress in this. Will also try and get pics..