Pullin the trigger on a few upgrades, reps for responses!

USAFstevo · 08-30-2010, 12:37 PM

Quote:

Originally Posted by red6spd

Great choice of parts. Thats the same set-up I'm going with except I'm doing non-resonated test-pipes, but thats because I wanna wake up my neighbors LOL. O and dont forget the Tune man!!! Got to tune the car after all those goddies to A) Make it run safely and B) Get the most out of all the money your spending. I also plan on getting a Oil Cooler with the Thermostat, I have had my temps over 260 a few times soooo. I would also go with the Stillen Pulley. I have see real gains from Vids on that part. I also dont really like UnderDrive Pullies.

Good Choice but Tune that Sh**

I though about tuning but apparently it completely voids the warranty, is it unsafe to not tune it?

flashburn · 08-30-2010, 12:39 PM

Quote:

Originally Posted by USAFstevo

I though about tuning but apparently it completely voids the warranty, is it unsafe to not tune it?

It can be unsafe if you are running lean, and if you are running HFC's, non-stock CAI, and CBE, you could be.

As for the warranty... if you get either Cobb or Uprev you can simply uninstall it before you go in and that will remove any traces of it.

One_Quick_Z · 08-30-2010, 02:03 PM

If you are going to be putting all of those bolt-ons on at once you might want to consider a Tune, to make sure you A/F ratio is good and you might get some bonus Hp

Cobb
Osiris
AAM

DAN

USAFstevo · 08-30-2010, 05:18 PM

Quote:

Originally Posted by flashburn

It can be unsafe if you are running lean, and if you are running HFC's, non-stock CAI, and CBE, you could be.

As for the warranty... if you get either Cobb or Uprev you can simply uninstall it before you go in and that will remove any traces of it.

I had no idea, is that confirmed btw? Will they really not be able to tell at all and in turn not be able to rail me when I come in with a problem under warranty?

Kirkster · 08-30-2010, 05:25 PM

Quote:

Originally Posted by flashburn

I just can't see how anyone could be driving safely or responsibly on public roads and have any sort of real oil temperature issues. I've driven fairly hard on public streets, and still never been able to get above 235-240.

You got lucky. Mine hits 240 going 65 around the DC beltway. Responsiably and safely.

flashburn · 08-30-2010, 05:36 PM

Quote:

Originally Posted by Kirkster

You got lucky. Mine hits 240 going 65 around the DC beltway. Responsiably and safely.

*shrug* I don't see how, from what I've experienced. Even in above 100 degree temperatures and 100% humidity.

flashburn · 08-30-2010, 05:37 PM

Quote:

Originally Posted by USAFstevo

I had no idea, is that confirmed btw? Will they really not be able to tell at all and in turn not be able to rail me when I come in with a problem under warranty?

Yeah, plenty of people have said that Nissan doesn't keep track of things like say BMW does. You'll be fine.

USAFstevo · 08-30-2010, 05:57 PM

so there isnt a way to tell if the ecu was disconnected and reconnected at all, no seals or codes that need to be cleared upon install or something?

Juleous · 08-30-2010, 06:05 PM

I would also suggest the HFC give a hoot don't polute.

Have you thought about something other than the stillen G3? It would be nice to not have to remove the front to change filters.

Body kit? The Amuse Vestito kit is killer, how about the entertainment system?

flashburn · 08-30-2010, 06:40 PM

Quote:

Originally Posted by USAFstevo

so there isnt a way to tell if the ecu was disconnected and reconnected at all, no seals or codes that need to be cleared upon install or something?

Once you uninstall either product it looks the same as stock to Nissan. Not sure what you mean by the ECU being disconnected, as both of those products are software solutions and not ECU replacements. They simply replace the tune stored on the ECU.

USAFstevo · 08-30-2010, 06:41 PM

Quote:

Originally Posted by Juleous

I would also suggest the HFC give a hoot don't polute.

Have you thought about something other than the stillen G3? It would be nice to not have to remove the front to change filters.

Body kit? The Amuse Vestito kit is killer, how about the entertainment system?

I did consider another intake however I wasnt able to find one with better power gains. I must say i like the amuse rear bumper but its a little to much money that i would rather put towards a supercharger. I havent realy put any thought into entertainment at all, any ideas?

USAFstevo · 08-30-2010, 06:42 PM

Quote:

Originally Posted by flashburn

Once you uninstall either product it looks the same as stock to Nissan. Not sure what you mean by the ECU being disconnected, as both of those products are software solutions and not ECU replacements. They simply replace the tune stored on the ECU.

well I feel dumb lol, thx for the input I think I might need to revise my list!

>135I · 08-30-2010, 06:58 PM

If you are looking to save a couple of bucks for some more upgrades. You can check out the DIY section and you can buy all the parts you will need for home built oil cooler set up. One of the members here did it and its working quite well. He listed all the parts you will need, where to buy them, and how to put it all together to make it work.

Jordo! · 08-30-2010, 07:13 PM

Also, RE: oil cooler -- I'll be testing out those ARC cool fins soon. If they drop temps by 10 -15* F, I'd say that will cover most folks who are seeing temps over 220 regularly unless they are tracking it.

Behold:

I also have two stuck on my diff cover

cab83_750 · 08-30-2010, 07:56 PM

Consider yourself lucky if you don't see high temps. I for one used to noticed that temps went high going uphill in traffic or even at safe and mature 65-70 mph driving.

Quote:

Originally Posted by flashburn

*shrug* I don't see how, from what I've experienced. Even in above 100 degree temperatures and 100% humidity.

08-30-2010, 02:03 PM	#18 (permalink)
One_Quick_Z A True Z Fanatic Join Date: May 2009 Location: Seneca Il Posts: 1,374 Drives: 10 Civic EX Sedan Rep Power: 219	If you are going to be putting all of those bolt-ons on at once you might want to consider a Tune, to make sure you A/F ratio is good and you might get some bonus Hp Cobb Osiris AAM DAN __________________ -My BRZ with exhaust will decimate all if we overnight parts from Japan- 10 Civic EX Sedan- Current Daily

08-30-2010, 06:58 PM	#28 (permalink)
>135I Enthusiast Member Join Date: Apr 2009 Location: Radcliff, KY Age: 42 Posts: 409 Drives: 2003 Cobra Rep Power: 16	If you are looking to save a couple of bucks for some more upgrades. You can check out the DIY section and you can buy all the parts you will need for home built oil cooler set up. One of the members here did it and its working quite well. He listed all the parts you will need, where to buy them, and how to put it all together to make it work. __________________ I will miss my Z. I hope she goes to a good home.

08-30-2010, 07:13 PM	#29 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	Also, RE: oil cooler -- I'll be testing out those ARC cool fins soon. If they drop temps by 10 -15* F, I'd say that will cover most folks who are seeing temps over 220 regularly unless they are tracking it. Behold: I also have two stuck on my diff cover __________________ Enjoy it. Destroy it. Last edited by Jordo!; 06-06-2014 at 12:20 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
About to pull the trigger	ky0u	Nissan 370Z Pricing / Ordering Discussions	3	07-15-2010 12:54 PM
cant pull the trigger...	TheShoura	Nissan 370Z General Discussions	86	06-16-2010 08:04 PM
Any Cobb Sponsorsor Reps?	ddvette9	Tuning	14	05-07-2010 12:23 AM
Varsteon TE37 Reps Matte Black	shl11111	Parts for sale (Private Classifieds)	19	01-03-2010 01:51 AM
Need Advice before pulling the Trigger	Asheth	Nissan 370Z Pricing / Ordering Discussions	5	01-27-2009 01:57 PM

08-30-2010, 05:57 PM	#23 (permalink)
USAFstevo Base Member Join Date: Apr 2010 Location: moody afb//Marietta, GA Posts: 75 Drives: e46 M3///2009 370z Rep Power: 15	so there isnt a way to tell if the ecu was disconnected and reconnected at all, no seals or codes that need to be cleared upon install or something?

08-30-2010, 06:05 PM	#24 (permalink)
Juleous Enthusiast Member Join Date: May 2010 Location: Nowhere Posts: 335 Drives: 370z Rep Power: 15	I would also suggest the HFC give a hoot don't polute. Have you thought about something other than the stillen G3? It would be nice to not have to remove the front to change filters. Body kit? The Amuse Vestito kit is killer, how about the entertainment system?