What did you do with your Z today

Cmike2780 · 02-14-2011, 04:53 PM

Quote:

Originally Posted by Vegitto-kun

lets see drove it around.

spend 110 euro on cleaning products.

started cleaning at 4:30 PM stopped now at 9:22 PM

washed, foam washed, clayed, waxed, cleaned rims and exhaust, leather cleaning products on the inside, used products to refresh all the plastic in the car.

only thing that I couldn't get done were the windows, used degreaser/windows cleaner products still leaving marks and stuff.

Try using clay bar on the glass also. Use a quality glass cleaner and lint free microfiber and you shouldn't see marks. You'd be surprised how dirty the glass really is.

kenchan · 02-14-2011, 05:01 PM

clay is good stuff on glass, also try RainX. that thing has some werd (strong) cleaning agents.

Vegitto-kun · 02-14-2011, 05:05 PM

I tried the clay, didn't do much,

you know what was most effective?

a ******* newspaper. roll it up and rub hardcore.

they don't sell rainX here well I never seen it atleast.

I am impressed with the clay bar. never used one before, nobody here knows about them. car is smooth as hell now.

everything I bought was meguiars.

meguiars Gold class car wash & conditioner
meguiars smooth surface clay kit
meguiars gold class liquid wax.

going to try the not liquid wax(forgot what its called) when this bottle is empty.

kenchan · 02-14-2011, 05:43 PM

Quote:

Originally Posted by Vegitto-kun

I tried the clay, didn't do much,

you know what was most effective?

a ******* newspaper. roll it up and rub hardcore.

they don't sell rainX here well I never seen it atleast.

there are different abrasive levels of clay. some are softer than others.

try magic eraser on your glass then. it's a foam polish. im sure your mom has it in the kitchen for her dishes and stove tops? DONT use it on paint though.

Vegitto-kun · 02-14-2011, 05:48 PM

Quote:

Originally Posted by kenchan

there are different abrasive levels of clay. some are softer than others.

try magic eraser on your glass then. it's a foam polish. im sure your mom has it in the kitchen for her dishes and stove tops? DONT use it on paint though.

wtf is magic eraser

stove tops? we are cooking magnets bro.

also dishwasher

SPOHN · 02-14-2011, 05:51 PM

Quote:

Originally Posted by 98intrigue

I had my 3rd set of front shocks installed, rear camber arms and toe bolts installed, had the car aligned, and washed mine on Saturday.

Why have you had a third set of shocks changed?

Quote:

Originally Posted by Mr. Q

The trap door is more than adequate enough to change the filter and plug.

How well is it if you have an oil cooler kit installed? Being the theromstatic plate extendes out a little further.

EazyD · 02-15-2011, 10:20 AM

Ordered vanity plates today.
Massachusetts has the worst limits on what you can put on them..

"Numbers cannot be used in the middle of a plate; they must come at the end.
The first number cannot be a "0".
The letters "I", "O", "Q", and "U" can ONLY be used as part of a word that is clearly defined and correctly spelled.
No spaces are allowed.
All plates must start with at least two letters.
They may contain a maximum of six characters."

UGH

kielbasa16 · 02-15-2011, 11:12 AM

Quote:

Originally Posted by EazyD

Ordered vanity plates today.
Massachusetts has the worst limits on what you can put on them..

"Numbers cannot be used in the middle of a plate; they must come at the end.
The first number cannot be a "0".
The letters "I", "O", "Q", and "U" can ONLY be used as part of a word that is clearly defined and correctly spelled.
No spaces are allowed.
All plates must start with at least two letters.
They may contain a maximum of six characters."

UGH

What did you actually come up with then? Or did I miss it?

sucasa · 02-15-2011, 11:34 AM

Last night.. DYI project.

Rustproofed my undercarriage. If you guys take a look underneathe your car, you will certainly see corrosion started to form on the flanges which bolt the exhaust to the mid pipe, and possible other components..

My exhaust flanges were turning orange. I went to the dealer and wanted to know if this is normal for a car with less than 700 miles bought two months ago. and they said 'yeap, we know. It's common. It is what it is'. It's only surface corrosion. Classy response from the dealer

I did some research online and chatted w/ other car guys. I went to a autoparts store, got the rustoleum flat black rust protectant. No primer needed. Got the car in the garage, slipped underneathe, and sprayed the corrosive parts. I put on two coats, dried in about 45 minutes completely. this morning checked out the results.. looks mucccccccch better.. Maybe it's me, but, I can't stand the fact i was seeing orange corrosion on a new car, and likelihood it would be getting worse, not a good thought..

Mr. Q · 02-15-2011, 03:30 PM

Quote:

Originally Posted by SPOHN

How well is it if you have an oil cooler kit installed? Being the theromstatic plate extendes out a little further.

I don't have an oil cooler installed so I cant really comment on that but I don't think it would be much of a problem especially with a strap wrench. Off the car I didn't think the trap door was large enough but once I installed it I could see it gave plenty of access and the door is completely removable.

Horseface · 02-15-2011, 05:03 PM

Drove it to work.

ClemsonWill · 02-15-2011, 05:20 PM

I drove my Z to work today, too. Now I'm looking out the 3rd floor window admiring her as the sun goes down.

xiven · 02-15-2011, 05:31 PM

Quote:

Originally Posted by ClemsonWill

I drove my Z to work today, too. Now I'm looking out the 3rd floor window admiring her as the sun goes down.

Its outside???

EazyD · 02-15-2011, 07:23 PM

Quote:

Originally Posted by kielbasa16

What did you actually come up with then? Or did I miss it?

My username

But I wish I could have had a space before the D

LunaZ · 02-15-2011, 10:11 PM

Quote:

Originally Posted by EazyD

Ordered vanity plates today.
Massachusetts has the worst limits on what you can put on them..

"Numbers cannot be used in the middle of a plate; they must come at the end.
The first number cannot be a "0".
The letters "I", "O", "Q", and "U" can ONLY be used as part of a word that is clearly defined and correctly spelled.
No spaces are allowed.
All plates must start with at least two letters.
They may contain a maximum of six characters."

UGH

I can see where they are coming from. Can't have people running around with plates that are hard to read like "OU1LLIQ" or "ILLUQ1O".
In Germany, they use special fonts to make sure that the letters are easy to read and cannot be altered by the plate holder:
Vehicle registration plates of Germany - Wikipedia, the free encyclopedia

02-14-2011, 05:05 PM	#603 (permalink)
Vegitto-kun A True Z Fanatic Join Date: Feb 2010 Location: USA Posts: 2,011 Drives: 09 370Z Rep Power: 262	I tried the clay, didn't do much, you know what was most effective? a ******* newspaper. roll it up and rub hardcore. they don't sell rainX here well I never seen it atleast. I am impressed with the clay bar. never used one before, nobody here knows about them. car is smooth as hell now. everything I bought was meguiars. meguiars Gold class car wash & conditioner meguiars smooth surface clay kit meguiars gold class liquid wax. going to try the not liquid wax(forgot what its called) when this bottle is empty. Last edited by Vegitto-kun; 02-14-2011 at 05:08 PM.

02-15-2011, 10:20 AM	#607 (permalink)
EazyD A True Z Fanatic Join Date: Nov 2009 Location: Massachusetts, USA Posts: 1,211 Drives: 2010 6MT Sport pkg. Rep Power: 26	Ordered vanity plates today. Massachusetts has the worst limits on what you can put on them.. "Numbers cannot be used in the middle of a plate; they must come at the end. The first number cannot be a "0". The letters "I", "O", "Q", and "U" can ONLY be used as part of a word that is clearly defined and correctly spelled. No spaces are allowed. All plates must start with at least two letters. They may contain a maximum of six characters." UGH __________________ Pearl White 2010 370Z Sport, Stillen CBE, tint, K&N drop-in filters, GT-R start button, Kenwood DNX-6980 with backup cam, LED bulbs, Raceseng shift knob.

02-15-2011, 11:34 AM	#609 (permalink)
sucasa Base Member Join Date: Jan 2011 Location: DC Posts: 156 Drives: 2010 370Z Rep Power: 14	Last night.. DYI project. Rustproofed my undercarriage. If you guys take a look underneathe your car, you will certainly see corrosion started to form on the flanges which bolt the exhaust to the mid pipe, and possible other components.. My exhaust flanges were turning orange. I went to the dealer and wanted to know if this is normal for a car with less than 700 miles bought two months ago. and they said 'yeap, we know. It's common. It is what it is'. It's only surface corrosion. Classy response from the dealer I did some research online and chatted w/ other car guys. I went to a autoparts store, got the rustoleum flat black rust protectant. No primer needed. Got the car in the garage, slipped underneathe, and sprayed the corrosive parts. I put on two coats, dried in about 45 minutes completely. this morning checked out the results.. looks mucccccccch better.. Maybe it's me, but, I can't stand the fact i was seeing orange corrosion on a new car, and likelihood it would be getting worse, not a good thought.. Last edited by sucasa; 02-15-2011 at 12:25 PM.

02-15-2011, 05:03 PM	#611 (permalink)
Horseface Enthusiast Member Join Date: Nov 2009 Location: Los Angeles. Posts: 253 Drives: 2010 370 Tr/Sprt/Nv Rep Power: 16	Drove it to work. __________________ Whinny!

02-15-2011, 05:20 PM	#612 (permalink)
ClemsonWill A True Z Fanatic Join Date: Jul 2010 Location: Charleston, SC Posts: 12,045 Drives: a Civic VP! Rep Power: 445	I drove my Z to work today, too. Now I'm looking out the 3rd floor window admiring her as the sun goes down. __________________ Slightly modded

02-14-2011, 05:01 PM	#602 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	clay is good stuff on glass, also try RainX. that thing has some werd (strong) cleaning agents.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 05:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 06:14 PM
Today was the day!	NewYorkJon34	New 370Z Owner	4	06-23-2009 04:03 PM
Just got it Today 6/14/09 :D!!!!	COD4	New 370Z Owner	15	06-21-2009 05:22 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 01:42 AM