What did you do with your Z today

martin82 · 12-26-2011, 07:13 PM

installed password CF

alcheng · 12-26-2011, 07:16 PM

Quote:

Originally Posted by kenchan

np, mr.happy!

hey i actually MOTORED MY Z TODAY!

yah, i did the steering lock replacement (check out the DIY section) and tried out the PWJDM knob.

looks moronic here but this is because i didnt feel like working on the knob today and just placed it over the nismo knob's rubber piece.

the knob feels good, but the decorative strip in the middle eats at my hand... any way to smooth this thing out a little without using sand paper or a file?

Mr.kenchan

nice hand-warmer on a hot summer day.

lol

pedZ · 12-26-2011, 07:42 PM

Quote:

Originally Posted by kenchan

np, mr.happy!

hey i actually MOTORED MY Z TODAY!

yah, i did the steering lock replacement (check out the DIY section) and tried out the PWJDM knob.

looks moronic here but this is because i didnt feel like working on the knob today and just placed it over the nismo knob's rubber piece.

the knob feels good, but the decorative strip in the middle eats at my hand... any way to smooth this thing out a little without using sand paper or a file?

Looks good kenchan.

Waiz · 12-26-2011, 07:42 PM

I had the day off again so I motored over to a surf spot I haven't been to in a very long time, surfed for about two hours and took this pic afterwards

Quote:

Originally Posted by martin82

installed password CF

That looks pretty good, congrats.

KingZee · 12-26-2011, 07:52 PM

Quote:

Originally Posted by Waizzz

I had the day off again so I motored over to a surf spot I haven't been to in a very long time, surfed for about two hours and took this pic afterwards

how much you want for lessons? I'm a good swimmer.

pedZ · 12-26-2011, 07:58 PM

Installed splash guards today since they were not on the car when I bought it from the dealer. The Z is ready for some spacers now.

I also played around with some 25mm spacers I had to see what they would look like on the stock rear wheels. A little too much for my taste. I'm thinking 15mm front and 20mm rear. Or even 10mm front and 15mm rear.

pedZ · 12-26-2011, 08:00 PM

Quote:

Originally Posted by Waizzz

I had the day off again so I motored over to a surf spot I haven't been to in a very long time, surfed for about two hours and took this pic afterwards

Which beach is that Waizzz?

Waiz · 12-26-2011, 08:01 PM

^Looks good, your splash guards are so much nicer than the ones for that came for the 350z!

Quote:

Originally Posted by KingZee

how much you want for lessons? I'm a good swimmer.

It's not the swimming part that you will need to manage it's the unrelenting ridiculously cold water.

pedZ · 12-26-2011, 09:15 PM

Quote:

Originally Posted by martin82

installed password CF

Very nice martin.

happytheman · 12-26-2011, 09:47 PM

Lovin the PWJDM CF!

Waiz · 12-26-2011, 10:10 PM

Quote:

Originally Posted by pedZ

Quote:

Originally Posted by pedZ

Which beach is that Waizzz?

Secret spot

TerribleONE · 12-26-2011, 10:58 PM

installed my stillen GEN 3s!!!

kenchan · 12-26-2011, 10:59 PM

martin- looks good.

waizzz- nice scenery!

hey so i filed the decorative part of the PWJDM knob a little bit (actually, it took me like 1hr not to scuff up the brushed area.

and the mt.fuji didn't look bad so i just kept it like this. i put a little plastic ring i had in my parts bin to raise the boot a little bit. perfect fit.

(crappy droid pict...)

kenchan · 12-26-2011, 11:02 PM

pedz- those splashguards are looking good!

yah, if i was to do it i would do 15/15 spacers. im currently running ET33/ET15 (while the rear is 10.5 on my weds), imho the offset looks perfect for stock height.

pedZ · 12-26-2011, 11:13 PM

Quote:

Originally Posted by kenchan

martin- looks good.

waizzz- nice scenery!

hey so i filed the decorative part of the PWJDM knob a little bit (actually, it took me like 1hr not to scuff up the brushed area.

and the mt.fuji didn't look bad so i just kept it like this. i put a little plastic ring i had in my parts bin to raise the boot a little bit. perfect fit.

(crappy droid pict...)

Looking good Kenchan.

Quote:

Originally Posted by kenchan

pedz- those splashguards are looking good!

yah, if i was to do it i would do 15/15 spacers. im currently running ET33/ET15 (while the rear is 10.5 on my weds), imho the offset looks perfect for stock height.

Funny that you mention that... I was just thinking about doing a 15/15 setup. It seems like even the 20mm would stick out a little too much on the rears. Thanks for the input!

12-26-2011, 07:58 PM	#9531 (permalink)
pedZ A True Z Fanatic Join Date: Jan 2011 Location: Southern California Posts: 3,366 Drives: 11 Tour/Spt/Nav/6MT Rep Power: 28	Installed splash guards today since they were not on the car when I bought it from the dealer. The Z is ready for some spacers now. I also played around with some 25mm spacers I had to see what they would look like on the stock rear wheels. A little too much for my taste. I'm thinking 15mm front and 20mm rear. Or even 10mm front and 15mm rear. __________________ 2011 Brilliant Silver Touring/Sport/Nav/6MT --- Build Journal F.I. SS 18" CBE \| Takeda CAI \| Z1 25-Row Oil Cooler \| Swift Springs \| Hotchkis Sway Bars \| H&R 15mm DRS Spacers F&R \| RJM Clutch Pedal \| UpRev Tune

12-26-2011, 09:47 PM	#9535 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Lovin the PWJDM CF! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 05:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 06:14 PM
Today was the day!	NewYorkJon34	New 370Z Owner	4	06-23-2009 04:03 PM
Just got it Today 6/14/09 :D!!!!	COD4	New 370Z Owner	15	06-21-2009 05:22 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 01:42 AM

12-26-2011, 07:13 PM	#9526 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	installed password CF

12-26-2011, 10:58 PM	#9537 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5851	installed my stillen GEN 3s!!!

12-26-2011, 10:59 PM	#9538 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	martin- looks good. waizzz- nice scenery! hey so i filed the decorative part of the PWJDM knob a little bit (actually, it took me like 1hr not to scuff up the brushed area. and the mt.fuji didn't look bad so i just kept it like this. i put a little plastic ring i had in my parts bin to raise the boot a little bit. perfect fit. (crappy droid pict...)

12-26-2011, 11:02 PM	#9539 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	pedz- those splashguards are looking good! yah, if i was to do it i would do 15/15 spacers. im currently running ET33/ET15 (while the rear is 10.5 on my weds), imho the offset looks perfect for stock height.