What did you do with your Z today

alcheng · 12-20-2011, 07:02 PM

Found this one last night, what do you guys think about 5-Zigen???

5Zigen ProRacer ZR+520 Wheels for 370z

Still have couple months to feed my piggy-bank and decide between this and the Forgestar, wewww

onzedge · 12-20-2011, 07:03 PM

Quote:

Originally Posted by alcheng

Found this one last night, what do you guys think about 5-Zigen???

5Zigen ProRacer ZR+520 Wheels for 370z

Still have couple months to feed my piggy-bank and decide between this and the Forgestar, wewww

Those look sharp and tend to get good reviews.

Alchemy · 12-20-2011, 07:06 PM

Nothing wrong w 5Zigen. Prob more $$$ than Forgestar though.

alcheng · 12-20-2011, 07:08 PM

Quote:

Originally Posted by onzedge

Those look sharp and tend to get good reviews.

Yup, I like the concave contour better.

Quote:

Originally Posted by Waizzz

Drags only drag you down from their absurd weight

Not anymore with the new choices, LOL

alcheng · 12-20-2011, 07:08 PM

Quote:

Originally Posted by Alchemy

Nothing wrong w 5Zigen. Prob more $$$ than Forgestar though.

Looked up couple sites, about the same price, to my surprised too

Alchemy · 12-20-2011, 07:13 PM

Quote:

Originally Posted by alcheng

Looked up couple sites, about the same price, to my surprised too

Also I saw you speaking of concave. The Forgestars come in a regular and a DEEP concave. Starting at 9.5 inches wide they go deep. I did 9 wide on the front which is reg then 11 wide rear which is deep.

happytheman · 12-20-2011, 09:34 PM

Quote:

Originally Posted by kenchan

mr.onzedge- glad to see that you received the knob.

hummmm... that is a gaping gap.

hahaha yah, a few spacers would help greatly.

ive still not decided wat to do with mine. it was a tad smaller than what i was hoping for so might just sell it.

I haven't put mine on yet for two reasons:
1) I don't have the o-rings. I know I can go out and get some, but I'm in no hurry.
2) It's def smaller than I thought it was going to be.

Quote:

Originally Posted by kenchan

the thing is i already have the nismo titanium knob which i am pretty happy with but just felt it was kinda narrow when shifting into 2nd gear.

i was hoping to get a rounder (like the TWM big TypeR knob) size but oh well. it's no big deal.

i'll decide wat to do later.

HAHA!! I was looking at this exact shift knob too! You know what they say about great minds!

Quote:

Originally Posted by brucelidat

Those are good MPG numbers. I don't get anything close to that, even on highway. Will do some day trips next week and see how I do on those.

You gotta keep your MPH down. If you can do 60MPH you'll get the best MPG!

Alchemy · 12-20-2011, 10:07 PM

Quote:

Originally Posted by happytheman

I haven't put mine on yet for two reasons:
1) I don't have the o-rings. I know I can go out and get some, but I'm in no hurry.
2) It's def smaller than I thought it was going to be.
!

Trust me, put it on and drive it. I thought the same thing and I cant explain how good it feels once you are actually using it.

Dembflyr · 12-20-2011, 10:17 PM

Quote:

Originally Posted by kenchan

sounds good dembflyr. much better than getting your nice car crashed upon.

drivers are crazy this time of the season...

Waiz · 12-20-2011, 10:20 PM

Quote:

Originally Posted by alcheng

Found this one last night, what do you guys think about 5-Zigen???

5Zigen ProRacer ZR+520 Wheels for 370z

Still have couple months to feed my piggy-bank and decide between this and the Forgestar, wewww

Might be a tad hard to find those wheels, I would ask around just to be sure.

Big improvement though

RC 370z · 12-20-2011, 11:21 PM

drove the z to work like always...i hate leaving it out in the open parking lot every day

p.s. does anybody else get excited when they see another z driving by them? maybe it just me and because there isn't that many z's in my area.(maybe 2 or 3 including mine)

ZForce · 12-20-2011, 11:47 PM

Quote:

Originally Posted by mantella87

Not too bad actually. Trucks around here spill a lot of rocks though, and 65 at almost any given time will have some type of debris all over the place especially with the bypass being constructed. I have a nice rock chip on my right side skirt that I need to touch up.

I am glad they finally finished the scuffed section between Sunset and Lincoln, that section used to rattle my fillings. If you need more than a touch up I have a local mobile guy that does good work.

Nice video and for a good cause. Love the soundtrack, my all time favorite group.

Quote:

Originally Posted by Skeeterbop

Here is what I did with my Z on Sunday:

No Z action the last two days....boring.. Good evening onzedge & kenchan

alcheng · 12-21-2011, 12:51 AM

Quote:

Originally Posted by Waizzz

Might be a tad hard to find those wheels, I would ask around just to be sure.

Big improvement though

There are some places have them, around $1500 for 19X9 and 19X10. Has to find out about the offset, but the link I posted couple posts above is from this forum, and it tells us the offset too, so I think it should be ok.

BTW, one side question, I saw some of you guys, MrAlchemy, MrOnzedge have those full-metal shift knob. How do you shift after you've parked your car outside for a while???

Do you need this???

DLSTR · 12-21-2011, 06:49 AM

Drove the Z here in Stuttgart yesterday in the snow(more than 2 inches) no problemo what so ever. Slush, powder/wet snow all good. Using good common sense for the conditions and letting the car work for you is the way to go, as others have posted. BLIZZAKS RULE!

happytheman · 12-21-2011, 07:28 AM

Quote:

Originally Posted by alcheng

BTW, one side question, I saw some of you guys, MrAlchemy, MrOnzedge have those full-metal shift knob. How do you shift after you've parked your car outside for a while???

Do you need this???

I've got this one guys!

Two things:
1) Covercraft Sun Shade: Window Sun Shields
2) Microfiber cloth placed deftly upon shift knob.

'nuff said!

12-20-2011, 07:06 PM	#9303 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 44 Posts: 4,855 Drives: to acquire tickets Rep Power: 3524	Nothing wrong w 5Zigen. Prob more $$$ than Forgestar though. __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL

12-20-2011, 11:21 PM	#9311 (permalink)
RC 370z Base Member Join Date: Jun 2011 Location: GA Posts: 106 Drives: 2011 370Z Black 7MT Rep Power: 14	drove the z to work like always...i hate leaving it out in the open parking lot every day p.s. does anybody else get excited when they see another z driving by them? maybe it just me and because there isn't that many z's in my area.(maybe 2 or 3 including mine) __________________ 2011 370Z Magnetic Black 7AT. E, ' \' ' ,F

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 05:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 06:14 PM
Today was the day!	NewYorkJon34	New 370Z Owner	4	06-23-2009 04:03 PM
Just got it Today 6/14/09 :D!!!!	COD4	New 370Z Owner	15	06-21-2009 05:22 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 01:42 AM

12-20-2011, 07:02 PM	#9301 (permalink)
alcheng A True Z Fanatic Join Date: Jun 2011 Location: Toronto Posts: 28,894 Drives: 2011 ZR PW w/Clutch Rep Power: 418353	Found this one last night, what do you guys think about 5-Zigen??? 5Zigen ProRacer ZR+520 Wheels for 370z Still have couple months to feed my piggy-bank and decide between this and the Forgestar, wewww

12-21-2011, 06:49 AM	#9314 (permalink)
DLSTR A True Z Fanatic Join Date: May 2011 Location: Süd Germany Posts: 2,462 Drives: 21Supra 2.0/22 M240i Rep Power: 21267	Drove the Z here in Stuttgart yesterday in the snow(more than 2 inches) no problemo what so ever. Slush, powder/wet snow all good. Using good common sense for the conditions and letting the car work for you is the way to go, as others have posted. BLIZZAKS RULE!