What did you do with your Z today

kenchan · 09-02-2011, 08:03 AM

Quote:

Originally Posted by Alchemy

^you can run those tires no prob.

SPOHN · 09-02-2011, 08:27 AM

Drove my car to work with the windows down. Love how the mornings are getting cooler.

Nick911sc · 09-02-2011, 08:45 AM

Just dropped my car off for an oil change, state inspection, berk cbe install and helper spring

Now I'm off to my desk job

onzedge · 09-02-2011, 08:48 AM

Quote:

Originally Posted by Nick911sc

Just dropped my car off for an oil change, state inspection, berk cbe install and helper spring

Now I'm off to my desk job

That is a nice Z car to do list. I will be like Christmas at the send of the day.

Lastly -- desk jobs!!!! Yay!!!

Footloose301 · 09-02-2011, 08:51 AM

Quote:

Originally Posted by Skeeterbop

One question though footloose, have you had a chance to evaluate the RE-11s?

So far I've got about 100 miles on them. 70 in dry and they feel great so far. I won't truly know how good they are until they have broken into the camber of my car. Obviously it still spins thru first and a bit thru second but like I said, they don't have 100% traction yet until they're broken in.

However, after I left class last night it was pouring outside, I was completely confident at 80mph. No signs of hydroplaning or anything. With the stock RE050A tires I couldn't do 45mph when they were bald(obviously), the tail of the car would be all over the place just driving straight down the parkway. When the RE050A's were new I would be able to go 60-70mph in pouring rain and that was as far as I felt that I could safely go. Even launching in the rain last night from 0-80mph with the RE-11's was as good as launching the RE050A's in dry. I love these so far and they should only get better.

Quote:

Originally Posted by FromG2Z

question for footloose or anyone else. Are there any issues with running 285's in the rear and 255's on STOCK rays???? They don't stick out too far or cause to much flex?

Other than that, it looks great.

They don't stick out at all. These are pretty much flush with the wheels. The stock tires have a stretched look to them that I hate and the stock front tires are almost flush with the wheel. Makes the car uneven looking if you ask me.

Some people run 305's in the rear without issues but since they're too wide for the wheel you actually lose out on a full 305 contact patch because the sides of the tires are pulled in to fit the wheel. I would not run 305's unless you just want bragging rights, but your traction is no better and you pay a lot more for those bragging rights.

I was able to play a little bit yesterday after the tires and the front end feels really light in comparison. Can't wait to get a matching set for the front.

Alchemy · 09-02-2011, 09:04 AM

^ I have 295's on mine and I love em. Almost went 305's but as you said I didnt feel like paying the extra for "braggin rights". I kinda wish I did though.

Nick911sc · 09-02-2011, 10:49 AM

^^ I like your forgestar F14's

FromG2Z · 09-02-2011, 11:01 AM

Quote:

Originally Posted by Footloose301

So far I've got about 100 miles on them. 70 in dry and they feel great so far. I won't truly know how good they are until they have broken into the camber of my car. Obviously it still spins thru first and a bit thru second but like I said, they don't have 100% traction yet until they're broken in.

However, after I left class last night it was pouring outside, I was completely confident at 80mph. No signs of hydroplaning or anything. With the stock RE050A tires I couldn't do 45mph when they were bald(obviously), the tail of the car would be all over the place just driving straight down the parkway. When the RE050A's were new I would be able to go 60-70mph in pouring rain and that was as far as I felt that I could safely go. Even launching in the rain last night from 0-80mph with the RE-11's was as good as launching the RE050A's in dry. I love these so far and they should only get better.

They don't stick out at all. These are pretty much flush with the wheels. The stock tires have a stretched look to them that I hate and the stock front tires are almost flush with the wheel. Makes the car uneven looking if you ask me.

Some people run 305's in the rear without issues but since they're too wide for the wheel you actually lose out on a full 305 contact patch because the sides of the tires are pulled in to fit the wheel. I would not run 305's unless you just want bragging rights, but your traction is no better and you pay a lot more for those bragging rights.

I was able to play a little bit yesterday after the tires and the front end feels really light in comparison. Can't wait to get a matching set for the front.

Quote:

Originally Posted by Alchemy

^ I have 295's on mine and I love em. Almost went 305's but as you said I didnt feel like paying the extra for "braggin rights". I kinda wish I did though.

So you guys are saying, for my next tire purchase, I can just get either 285 or 295's for rears, and 255's for fronts and just mount them directly with no other changes, on my stock 19" Rays?!?!? If so... sweeeeet!

Footloose, what did you mean by get a matching set for the front? You don't like your 255's in front??? Stock is 245, so it looks like you're going 10 over?

Nick911sc · 09-02-2011, 11:04 AM

Not my car but.... 305's on stock rims with 25mm spacers

FromG2Z · 09-02-2011, 11:06 AM

No Z action for me today (rain), however, the night before, I washed her..... then last night, I coated her with CG 50/50, then coated the wheels with OCW, and the tires with DP Gel.... mmmm...

This weekend, I plan to change her with Amsoil. Oil check news: at about 700 miles since topping it off to the "H" mark, I lost about 1 to 1.5 mm worth of oil. So I believe I am well into the safe zone, based on the chart on the Oil Consumption TSB. I think the worst case is 9mm of oil measurement loss by 1000 miles. So, I don't believe (knock on wood) I will burn up 8mm worth in 300 miles. YAY for me! So, oil change this weekend to AMSOIL!!!! woot woot...

Alchemy · 09-02-2011, 11:07 AM

Quote:

Originally Posted by Nick911sc

^^ I like your forgestar F14's

Thanks you sir

G2Z- I have aftermarket wheels and my rears are 11 inches wide, I can fit plenty of rubber on there. But yes, people are fitting 305's on the rear stock Rays. Running 255's front and 285-295 rear on the stock wheels wont be a prob.

FromG2Z · 09-02-2011, 11:07 AM

Quote:

Originally Posted by Nick911sc

Not my car but.... 305's on stock rims with 25mm spacers

That doesn't look good, IMO. Too wide.

onzedge · 09-02-2011, 11:11 AM

Quote:

Originally Posted by FromG2Z

That doesn't look good, IMO. Too wide.

Alchemy · 09-02-2011, 11:16 AM

Quote:

Originally Posted by FromG2Z

That doesn't look good, IMO. Too wide.

I just said it would work, I didnt say it would look good

kenchan · 09-02-2011, 11:25 AM

Quote:

Originally Posted by Alchemy

I just said it would work, I didnt say it would look good

lol too funny.

guess there's a difference between doing it and doing it in style.

yesterday talked to my buddy in japanland who's going to pickup a pair of front j-next fender molds for me later this month.

09-02-2011, 08:27 AM	#5897 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Drove my car to work with the windows down. Love how the mornings are getting cooler. __________________

09-02-2011, 09:04 AM	#5901 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 44 Posts: 4,855 Drives: to acquire tickets Rep Power: 3524	^ I have 295's on mine and I love em. Almost went 305's but as you said I didnt feel like paying the extra for "braggin rights". I kinda wish I did though. __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL

09-02-2011, 11:06 AM	#5905 (permalink)
FromG2Z A True Z Fanatic Join Date: Nov 2010 Location: Fields of Opportunities Posts: 1,406 Drives: '12 5.0, kona, 6MT Rep Power: 18	No Z action for me today (rain), however, the night before, I washed her..... then last night, I coated her with CG 50/50, then coated the wheels with OCW, and the tires with DP Gel.... mmmm... This weekend, I plan to change her with Amsoil. Oil check news: at about 700 miles since topping it off to the "H" mark, I lost about 1 to 1.5 mm worth of oil. So I believe I am well into the safe zone, based on the chart on the Oil Consumption TSB. I think the worst case is 9mm of oil measurement loss by 1000 miles. So, I don't believe (knock on wood) I will burn up 8mm worth in 300 miles. YAY for me! So, oil change this weekend to AMSOIL!!!! woot woot... __________________ 2012 5.0 GT Prem, Kona Blue, 6MT, HID, Brembo, 3.73 -- Ordered: 9/20/11, Born on: 10/20/11, Delivered 11/15/11"Marilyn" GT500 mufflers/flaps, MGW shifter, FRPP K springs, BMR panhard bar, Boss coil covers, 3DC spoiler, Llumar Tint (35% and 20%), 3M ClearBra

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 05:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 06:14 PM
Today was the day!	NewYorkJon34	New 370Z Owner	4	06-23-2009 04:03 PM
Just got it Today 6/14/09 :D!!!!	COD4	New 370Z Owner	15	06-21-2009 05:22 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 01:42 AM

09-02-2011, 08:45 AM	#5898 (permalink)
Nick911sc A True Z Fanatic Join Date: Feb 2009 Location: Long Island, New York Posts: 1,698 Drives: 2010 Nissan GT-R Rep Power: 20	Just dropped my car off for an oil change, state inspection, berk cbe install and helper spring Now I'm off to my desk job

09-02-2011, 10:49 AM	#5902 (permalink)
Nick911sc A True Z Fanatic Join Date: Feb 2009 Location: Long Island, New York Posts: 1,698 Drives: 2010 Nissan GT-R Rep Power: 20	^^ I like your forgestar F14's

09-02-2011, 11:04 AM	#5904 (permalink)
Nick911sc A True Z Fanatic Join Date: Feb 2009 Location: Long Island, New York Posts: 1,698 Drives: 2010 Nissan GT-R Rep Power: 20	Not my car but.... 305's on stock rims with 25mm spacers