What did you do with your Z today

kenchan · 07-11-2011, 06:32 PM

G2Z- looks like fun.

. Wow, clean Gen5 lude. I had one long time ago...98' was a great car of its time.

LunaZ · 07-11-2011, 07:08 PM

Picked her up from the shop after throwing in the towel on some stubborn bolts on the front control arms that prevented me from completing my spring install. Here she is with a slightly lower stance on Swift springs and H&R spacers:

Powdercoated calipers by Mike. I went with a factory tweaked look:

Not visible in the pictures are stainless steel brake lines and a fresh supply of ATE Super Blue brake fluid.

kenchan · 07-11-2011, 07:27 PM

looks good, luna!

Alchemy · 07-11-2011, 08:44 PM

Looks good Luna. I did my Swifts Saturday. I love them. Actually just walked in the door from puttin her thru some good twisties for the first time. They are amazing. Love the calipers too, wish mine were red.

SPOHN · 07-11-2011, 08:47 PM

Looks great. Props.

onzedge · 07-11-2011, 09:04 PM

Quote:

Originally Posted by LunaZ

Picked her up from the shop after throwing in the towel on some stubborn bolts on the front control arms that prevented me from completing my spring install. Here she is with a slightly lower stance on Swift springs and H&R spacers:

Powdercoated calipers by Mike. I went with a factory tweaked look:

Not visible in the pictures are stainless steel brake lines and a fresh supply of ATE Super Blue brake fluid.

I went with the Ate Superblue and Goodridge SS lines -- one of the best upgrades I have made. Nice work on all else too. +1 rep for you.

christian370z · 07-11-2011, 09:13 PM

Quote:

Originally Posted by SPOHN

I know the feeling. I also love going to the dentist myself. Always some hot women there leaning over ya.

The best thing to look forward to at the dentist without a doubt. If you are lucky, she might have a nice set that is up against you the entire time.

Quote:

Originally Posted by LunaZ

Picked her up from the shop after throwing in the towel on some stubborn bolts on the front control arms that prevented me from completing my spring install. Here she is with a slightly lower stance on Swift springs and H&R spacers:

Powdercoated calipers by Mike. I went with a factory tweaked look:

Not visible in the pictures are stainless steel brake lines and a fresh supply of ATE Super Blue brake fluid.

Your car is beautiful, the drop looks fantastic. Shame that you ran into some trouble with the install, at least you didn't have to get it towed! How do you like the change in the ride and handling?

Quote:

Originally Posted by Alchemy

I did my Swifts Saturday. I love them. Actually just walked in the door from puttin her thru some good twisties for the first time. They are amazing. Love the calipers too, wish mine were red.

Nice Alchemy! Another happy Swift owner, the change they make is amazing for a set of springs. It makes the Z feel much lighter on its feet and the car's balance is much more neutral.

LunaZ · 07-11-2011, 09:23 PM

Quote:

Originally Posted by christian370z

Your car is beautiful, the drop looks fantastic. Shame that you ran into some trouble with the install, at least you didn't have to get it towed! How do you like the change in the ride and handling?

Thanks a lot!!!

I've only had the chance to take a short kenchan so far, but I can tell right away the car feels a lot more stable and the turn-in is noticeably quicker and more precise. It definitely feels a bit firmer over bumps, but not in a way that's annoying like other cars I've lowered in the past.
More time and miles will tell for sure, but I'm thinking I'm going to be very satisfied overall.

Alchemy · 07-11-2011, 10:23 PM

Quote:

Originally Posted by LunaZ

Thanks a lot!!!

I've only had the chance to take a short kenchan so far, but I can tell right away the car feels a lot more stable and the turn-in is noticeably quicker and more precise. It definitely feels a bit firmer over bumps, but not in a way that's annoying like other cars I've lowered in the past.
More time and miles will tell for sure, but I'm thinking I'm going to be very satisfied overall.

Thats one thing I have noticed most about the Swifts, turn in. The car feels very direct as soon as you turn that wheel.

FromG2Z · 07-12-2011, 12:07 AM

Quote:

Originally Posted by kenchan

G2Z- looks like fun.

. Wow, clean Gen5 lude. I had one long time ago...98' was a great car of its time.

Yeah I wish I took a shot of the engine bay. You could have eaten off that thing.

Quote:

Originally Posted by LunaZ

Picked her up from the shop after throwing in the towel on some stubborn bolts on the front control arms that prevented me from completing my spring install. Here she is with a slightly lower stance on Swift springs and H&R spacers:

Powdercoated calipers by Mike. I went with a factory tweaked look:

Not visible in the pictures are stainless steel brake lines and a fresh supply of ATE Super Blue brake fluid.

Quote:

Originally Posted by LunaZ

Thanks a lot!!!

I've only had the chance to take a short kenchan so far, but I can tell right away the car feels a lot more stable and the turn-in is noticeably quicker and more precise. It definitely feels a bit firmer over bumps, but not in a way that's annoying like other cars I've lowered in the past.
More time and miles will tell for sure, but I'm thinking I'm going to be very satisfied overall.

Luna... gorgeous car bro.

So did you have the calipers colored red just like the 40th calipers? I also like your rotors. What type are those?

As for the swift springs, those look great. So all you changed are the springs, then left the OEM shocks? Any foreseeable issue with this? Or is it perfectly acceptable to run aftermarket springs with stock shocks?

doda74 · 07-12-2011, 05:17 AM

Quote:

Originally Posted by FromG2Z

Yeah I wish I took a shot of the engine bay. You could have eaten off that thing.

Luna... gorgeous car bro.

So did you have the calipers colored red just like the 40th calipers? I also like your rotors. What type are those?

As for the swift springs, those look great. So all you changed are the springs, then left the OEM shocks? Any foreseeable issue with this? Or is it perfectly acceptable to run aftermarket springs with stock shocks?

I heard that the Swift springs were designed & tested and therefore optimized on the Nismo, which does use different shocks than Sport version. However, there any many forum members with Sport that have these installed without any issues and have given great reviews. As for any potential long term issues, I don't know. Worst case is that the shocks don't last as long as they would on stock springs.

LunaZ · 07-12-2011, 07:41 AM

Quote:

Originally Posted by FromG2Z

Luna... gorgeous car bro.

So did you have the calipers colored red just like the 40th calipers? I also like your rotors. What type are those?

As for the swift springs, those look great. So all you changed are the springs, then left the OEM shocks? Any foreseeable issue with this? Or is it perfectly acceptable to run aftermarket springs with stock shocks?

Thanks man!
Yup, the inspiration for the caliper colour was the 40th... that, and I just think sports cars should have red brakes. Not that there's anything wrong with colour matched calipers like on a lime green Lamborghini Superleggara

With aftermarket lowering springs on stock shocks, the main issue is springs that are too low and cause the shock piston to work outside of its normal stroke range and bottom out. The Swift springs have a conservative drop and I don't think they'll be an issue. Time will tell.

kenchan · 07-12-2011, 08:07 AM

Lunaz- take it to the bumpiest of roads aka railroad crossing and let us know how it differs from stock. Most often spring only setups are okay on smooth surfaces but not at the extremes. May be swift mastered this?

LunaZ · 07-12-2011, 09:31 AM

Quote:

Originally Posted by kenchan

Lunaz- take it to the bumpiest of roads aka railroad crossing and let us know how it differs from stock. Most often spring only setups are okay on smooth surfaces but not at the extremes. May be swift mastered this?

I live in Pennsylvania... even the smoothest interstate is like a railroad crossing.

Used my newly purchased Mity Vac to bleed my brakes this morning.
Where have you been all my life, Mity Vac?!?!? I can't believe I've waited this long to buy one for my garage.
As I suspected, there was some air in my system after swapping out the calipers and lines. All better now.

kenchan · 07-12-2011, 12:06 PM

Quote:

Originally Posted by LunaZ

I live in Pennsylvania... even the smoothest interstate is like a railroad crossing.

Used my newly purchased Mity Vac to bleed my brakes this morning.
Where have you been all my life, Mity Vac?!?!? I can't believe I've waited this long to buy one for my garage.
As I suspected, there was some air in my system after swapping out the calipers and lines. All better now.

lol!

mity vac sounds like a worthy investment.

07-11-2011, 07:08 PM	#3662 (permalink)
LunaZ A True Z Fanatic Join Date: Mar 2010 Location: Vagabond Posts: 6,704 Drives: Project: a white one Rep Power: 512	Picked her up from the shop after throwing in the towel on some stubborn bolts on the front control arms that prevented me from completing my spring install. Here she is with a slightly lower stance on Swift springs and H&R spacers: Powdercoated calipers by Mike. I went with a factory tweaked look: Not visible in the pictures are stainless steel brake lines and a fresh supply of ATE Super Blue brake fluid. __________________ 2009 370Z Sport/Touring/Navigation \| see my journal for mods facebook: Be my friend... or not.

07-11-2011, 08:44 PM	#3664 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 45 Posts: 4,855 Drives: to acquire tickets Rep Power: 3524	Looks good Luna. I did my Swifts Saturday. I love them. Actually just walked in the door from puttin her thru some good twisties for the first time. They are amazing. Love the calipers too, wish mine were red. __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL

07-11-2011, 08:47 PM	#3665 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Looks great. Props. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 05:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 06:14 PM
Today was the day!	NewYorkJon34	New 370Z Owner	4	06-23-2009 04:03 PM
Just got it Today 6/14/09 :D!!!!	COD4	New 370Z Owner	15	06-21-2009 05:22 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 01:42 AM

07-11-2011, 06:32 PM	#3661 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	G2Z- looks like fun. . Wow, clean Gen5 lude. I had one long time ago...98' was a great car of its time.

07-11-2011, 07:27 PM	#3663 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	looks good, luna!

07-12-2011, 08:07 AM	#3673 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Lunaz- take it to the bumpiest of roads aka railroad crossing and let us know how it differs from stock. Most often spring only setups are okay on smooth surfaces but not at the extremes. May be swift mastered this?