What did you do with your Z today

Dzel · 07-03-2011, 08:36 PM

Onzedge

kenchan · 07-03-2011, 08:42 PM

Mr.onzedge- your 240 looks awesome!

dang...

onzedge · 07-03-2011, 08:52 PM

Quote:

Originally Posted by Dzel

Onzedge

Quote:

Originally Posted by kenchan

Mr.onzedge- your 240 looks awesome!

dang...

Thanks guys. That means much to me, coming from you. I am giving my 370 a rest for a little while and am going old school back to my former DD.

kenchan · 07-03-2011, 08:57 PM

Waiz · 07-03-2011, 09:50 PM

Nice 240!

FromG2Z · 07-03-2011, 10:01 PM

Dang...very nice onzedge. Gorgeous 240z. More pics pls!

Dzel · 07-03-2011, 10:44 PM

What mods does it have?

onzedge · 07-03-2011, 11:00 PM

Quote:

Originally Posted by Dzel

What mods does it have?

The 240? I put more money into restoration stuff than mods over the years, it seems. Here is a partial mod list:

All bushings are Suspension Techniques urethane
Front and rear MSA sway bars
Front and rear MSA strut braces
Aluminum radiator and electric fans
Tokico Illumina springs and dampers
Momo Monte Carlo steering wheel
E-31 head with oversized (P-90) valves
Mildly built cam
Fidanza flywheel
Centerforce II clutch
6-2-1 header and Dynaflow exhaust
Short steering knuckles with bump steer spacers

I have a Borg Warner T-5 that is going in this summer as soon as I find a reasonable condition R-200 diff with the right gears (3.83 or 3.90). I am also going to replace the front and rear control arms with custom built ones from Techno Toy tuning. Last, I am strongly considering stroking one of the spare F54 blocks (from a 280zx) in August because I always wanted 230 + hp in this Z.

Thanks for asking. I am sure I am leaving out stuff, but this is a representative list.

Fire · 07-04-2011, 12:35 AM

Kewl Z onze. I traded my extrememly modded 76 280z this year. I had replaced bushings with poly bushings, lowered 1 1/2", had custom Bonspeed rims with Kuhmo tires. Roll bar, custom gauges, battery in trunk. I swapped in a 406ci SBC with trick flow heads, edelbrock fuel injection and nitrous, turbo 350 trans. I put in a safety fuel cell, race kirkey race seats and 5 point 3" harnesses. The body was custom with molded body kit including rear wheel wells, a custom cowl induction hood and roof scoop. Oh h/p 400 on engine only, 500 with NOS.

kenchan · 07-04-2011, 08:12 AM

Quote:

Originally Posted by onzedge

The 240? I put more money into restoration stuff than mods over the years, it seems. Here is a partial mod list:

All bushings are Suspension Techniques urethane
Front and rear MSA sway bars
Front and rear MSA strut braces
Aluminum radiator and electric fans
Tokico Illumina springs and dampers
Momo Monte Carlo steering wheel
E-31 head with oversized (P-90) valves
Mildly built cam
Fidanza flywheel
Centerforce II clutch
6-2-1 header and Dynaflow exhaust
Short steering knuckles with bump steer spacers

I have a Borg Warner T-5 that is going in this summer as soon as I find a reasonable condition R-200 diff with the right gears (3.83 or 3.90). I am also going to replace the front and rear control arms with custom built ones from Techno Toy tuning. Last, I am strongly considering stroking one of the spare F54 blocks (from a 280zx) in August because I always wanted 230 + hp in this Z.

Thanks for asking. I am sure I am leaving out stuff, but this is a representative list.

PapoZalsa · 07-04-2011, 11:35 AM

Analyzing on how to lower the tips of my F.I. so I can fit the EVO-R rear valance.

LunaZ · 07-04-2011, 12:25 PM

Quote:

Originally Posted by PapoZalsa

Analyzing on how to lower the tips of my F.I. so I can fit the EVO-R rear valance.

Just pop a few washers under the three bolts that secure the exhaust hangers to body and you're all set!
(Depending on how many washers you decide to add, you may need longer bolts)

kenchan · 07-04-2011, 01:41 PM

Yep, wat Luna said.

Motored my Z again today and had a great time.

I think all the lowend bozo's were still asleep from heavy drinking and so roads were clear from those dumbarses that drive slow on sunny days and fast on rainy crap days.

PapoZalsa · 07-04-2011, 03:54 PM

Quote:

Originally Posted by LunaZ

Just pop a few washers under the three bolts that secure the exhaust hangers to body and you're all set!
(Depending on how many washers you decide to add, you may need longer bolts)

Well that was my initial thought.

However, what I was analyzing is since the F.I. sits close to the ground. I was thinking if in the future I decide to lower the car if is going to scrape and damage the F.I.

kenchan · 07-04-2011, 04:45 PM

Yah, that unit is close to the ground. I gave my fujimura rear valance about 7-8mm clearance. No issue with melting but I don't track the car..

07-03-2011, 08:36 PM	#3436 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Onzedge __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

07-03-2011, 10:01 PM	#3441 (permalink)
FromG2Z A True Z Fanatic Join Date: Nov 2010 Location: Fields of Opportunities Posts: 1,406 Drives: '12 5.0, kona, 6MT Rep Power: 18	Dang...very nice onzedge. Gorgeous 240z. More pics pls! __________________ 2012 5.0 GT Prem, Kona Blue, 6MT, HID, Brembo, 3.73 -- Ordered: 9/20/11, Born on: 10/20/11, Delivered 11/15/11"Marilyn" GT500 mufflers/flaps, MGW shifter, FRPP K springs, BMR panhard bar, Boss coil covers, 3DC spoiler, Llumar Tint (35% and 20%), 3M ClearBra

07-03-2011, 10:44 PM	#3442 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	What mods does it have? __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

07-04-2011, 12:35 AM	#3444 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 43	Kewl Z onze. I traded my extrememly modded 76 280z this year. I had replaced bushings with poly bushings, lowered 1 1/2", had custom Bonspeed rims with Kuhmo tires. Roll bar, custom gauges, battery in trunk. I swapped in a 406ci SBC with trick flow heads, edelbrock fuel injection and nitrous, turbo 350 trans. I put in a safety fuel cell, race kirkey race seats and 5 point 3" harnesses. The body was custom with molded body kit including rear wheel wells, a custom cowl induction hood and roof scoop. Oh h/p 400 on engine only, 500 with NOS. __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp Last edited by Fire; 07-04-2011 at 09:24 AM.

07-04-2011, 11:35 AM	#3446 (permalink)
PapoZalsa A True Z Fanatic Join Date: Nov 2009 Location: Not in Sunny Florida Posts: 6,358 Drives: 16 Nismo w/Tech Pack Rep Power: 4500	Analyzing on how to lower the tips of my F.I. so I can fit the EVO-R rear valance. __________________ 2009 370Z MB Base w/Sport Package 6MT Modshack's Custom Air Intakes /3M Clear Bra/ Illuminated Kick Plates / F. I CBE w/12" resonators / EVO-R Front Lip / Rear Hatch Wing / Tein S-Tech Springs /Ilegal Tint in the Rep. of VA/4x20mm Z1 Spacers/ Vinyl Roof/Liquid Carbon Designs

07-03-2011, 08:42 PM	#3437 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Mr.onzedge- your 240 looks awesome! dang...

07-03-2011, 08:57 PM	#3439 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521

07-03-2011, 09:50 PM	#3440 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,262 Drives: Z33 & GE8 Rep Power: 459	Nice 240!

07-04-2011, 01:41 PM	#3448 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Yep, wat Luna said. Motored my Z again today and had a great time. I think all the lowend bozo's were still asleep from heavy drinking and so roads were clear from those dumbarses that drive slow on sunny days and fast on rainy crap days.

07-04-2011, 04:45 PM	#3450 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Yah, that unit is close to the ground. I gave my fujimura rear valance about 7-8mm clearance. No issue with melting but I don't track the car..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 05:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 06:14 PM
Today was the day!	NewYorkJon34	New 370Z Owner	4	06-23-2009 04:03 PM
Just got it Today 6/14/09 :D!!!!	COD4	New 370Z Owner	15	06-21-2009 05:22 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 01:42 AM