What did you do with your Z today

FromG2Z

The PC has a removable handle too. But I don't use it anyways. Just grab a hold of the back of the PC... Don't get me wrong, Griots is nice too. I like them all

If you're not careful with any of these buffers, you'll burn the paint. It's just harder to burn it with a dual action like the PC or the Griots DA. The Flex is halfway between a DA and a rotary. It cuts better and quicker, giving you a better result than any other DA at 1/2 the passes. Some people (inlcuding myself) say it even finishes nicer than a rotary.

Put it this way... the Flex is the safey and convenience of a DA, with the power of a rotary.

Ken, the pad system (and associated colors) applies to all DA's/rotaries, not just Griot's. Using a hook and loop backing plate, the pads are interchangeable with any machine. So it doesn't matter whether it's a Griots or PC or Flex. As long as you have the proper sized backing plate, you can switch around the pads. I usually correct with my Flex, then glaze and seal with my PC. Flex is just that much better for correcting.

Also in general, the oranges and coarse yellows are universally color coded to be more aggressive, followed by coarse green, white, grey, blue, red, then gold. Use grey for final polishes, blue for glazes, then red for sealants. Gold pads are just for caressing

__________________
2012 5.0 GT Prem, Kona Blue, 6MT, HID, Brembo, 3.73 -- Ordered: 9/20/11, Born on: 10/20/11, Delivered 11/15/11"Marilyn" GT500 mufflers/flaps, MGW shifter, FRPP K springs, BMR panhard bar, Boss coil covers, 3DC spoiler, Llumar Tint (35% and 20%), 3M ClearBra