What did you do with your Z today

Red__Zed · 05-13-2011, 08:53 PM

Quote:

Originally Posted by chops

thats my exact specs! heh..i pulled off the wheels the other day and after 500miles or so the camber wear is already starting to show

ouch. its ok...i completely wrecked my stock knob :| im going to have it re-wrapped in alcantara one of these days!

What toe are you running out back?

EazyD · 05-13-2011, 10:26 PM

Quote:

Originally Posted by kenchan

(Re: California Duster) -

yep!

make sure you let it sit on some old newspaper for a couple of days to rid the excess paffrin in there. otherwise it smears on glass.

Thanks, good to know, I'll try that out Mr. K.!

kenchan · 05-13-2011, 11:07 PM

Quote:

Originally Posted by EazyD

Thanks, good to know, I'll try that out Mr. K.!

So I finished the new knob and the stock knob...

Trips · 05-13-2011, 11:08 PM

I finally washed her

FromG2Z · 05-13-2011, 11:46 PM

Quote:

Originally Posted by kenchan

I failed my first attempt to remove stock knob...actually the strap wrench broke.

hahahaha

Quote:

Originally Posted by kenchan

Sounds good. 1.7's pretty good. You want more neg camber up front?

Hahahaha, not sure how much loctite they used but the knob is seized.

Dude... how the heck did you break that strap wrench? Dang... yours was on a LOT tighter? So what was the fate of your stock knob? Still in good shape?

Nice pic of the install. Looks great in there. How does it feel?

onzedge · 05-14-2011, 12:59 AM

Quote:

Originally Posted by kenchan

So I finished the new knob and the stock knob...

Sweet.

JB1 · 05-14-2011, 01:08 AM

Drove to and from work with a modified "clutch helper spring". This is the way the stock clutch should have been...

98intrigue · 05-14-2011, 01:30 AM

Just got back from an hour boosting cruise

Red__Zed · 05-14-2011, 01:47 AM

Quote:

Originally Posted by 98intrigue

Just got back from an hour boosting cruise

very nice!

Red__Zed · 05-14-2011, 01:48 AM

I just finished dialing in my alignment specs. I highly recommend anyone who drives their Z through the twisties dial out the toe-in recommend by Nissan. It really wakes the car up to run no toe-in, and even more so if you run toe out.

Carbon_z · 05-14-2011, 02:09 AM

Quote:

Originally Posted by 98intrigue

Have you posted that before? I think I remember reading that.

Ps google G35 dog poop...it's worth it

STOCKER

Yea when it happened and I was in need of a new panel since indention were visible and scratches but still haven't replaced since I am waiting until either interior is finished or a show to take the z too... then ill pay 400 lol and first thing i do is throw away the insert lol and use my carbon fiber one.

I am hoping to find somebody that is going to paint the interior " i know i know" but maybe they will take mine and some cash since the body shop is going to destroy theirs... BTW: I look at every single time I drive the car.

chops · 05-14-2011, 05:31 AM

Quote:

Originally Posted by Red__Zed

What toe are you running out back?

toe in the back? rear left: 0.16, rear right: 0.16; total 0.32 degrees

nothing special!

as for what else i did with my Z today...i surprisingly set off a few car alarms in an uber busy parking structure. then went to watch fast5. came out and felt like a total ricer getting into my car.

good movie though!

LunaZ · 05-14-2011, 07:14 AM

Quote:

Originally Posted by JB1

Drove to and from work with a modified "clutch helper spring". This is the way the stock clutch should have been...

Explain. I've never heard of this.

docaam · 05-14-2011, 07:51 AM

Quote:

Originally Posted by Red__Zed

I just finished dialing in my alignment specs. I highly recommend anyone who drives their Z through the twisties dial out the toe-in recommend by Nissan. It really wakes the car up to run no toe-in, and even more so if you run toe out.

can you pm me the toe settings?

kenchan · 05-14-2011, 08:29 AM

Im not sure zero toe is a good idea for the rear... hip wobble.

Thanks onzedge!

G2Z- yah mine was literally seized tight.

so far im loving the new knob.
I wont be able to take a spin until next weekend though... letting my driveway cure.

05-13-2011, 11:08 PM	#1909 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	I finally washed her __________________

05-14-2011, 01:08 AM	#1912 (permalink)
JB1 Track Member Join Date: Mar 2009 Location: Chicagoland Posts: 748 Drives: 09 Nissan 370Z sold Rep Power: 17	Drove to and from work with a modified "clutch helper spring". This is the way the stock clutch should have been... __________________ Black Fangs // Black rear Valance // Berk CBE // COBB post MAF tubes // K&N drop in filters // Setrab Oil Cooler // Stillen Sway bars // Z1 SS brake lines // Stillen brake cooling kit // Harness bar //

05-14-2011, 01:30 AM	#1913 (permalink)
98intrigue A True Z Fanatic Join Date: Jul 2010 Location: Clearwater, FL Age: 39 Posts: 4,855 Drives: 2014 Viper Rep Power: 430	Just got back from an hour boosting cruise __________________ Ryan - 2014 Stryker Green Viper Gone - a few Vipers and a couple turbo VQs

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 05:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 06:14 PM
Today was the day!	NewYorkJon34	New 370Z Owner	4	06-23-2009 04:03 PM
Just got it Today 6/14/09 :D!!!!	COD4	New 370Z Owner	15	06-21-2009 05:22 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 01:42 AM

05-14-2011, 01:48 AM	#1915 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 120	I just finished dialing in my alignment specs. I highly recommend anyone who drives their Z through the twisties dial out the toe-in recommend by Nissan. It really wakes the car up to run no toe-in, and even more so if you run toe out.

05-14-2011, 08:29 AM	#1920 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Im not sure zero toe is a good idea for the rear... hip wobble. Thanks onzedge! G2Z- yah mine was literally seized tight. so far im loving the new knob. I wont be able to take a spin until next weekend though... letting my driveway cure.