Magnetic Oil Drain Plug danger?

spearfish25 · 03-28-2010, 10:00 AM

Quote:

Originally Posted by molamann

Kics Project Magnetic Drain Plug: Evasive Motorsports | PH: 626.336.3400 Mon-Fri, 9am-6pm PST

That's what I have, recommended by AK. Perhaps you may want something like that seems it appears a bit more fail safe compared to the other.

Problem with this one is that there is very little magnet exposed for $hit to stick to. The protruding magnet has a lot more area to 'grab' particles.

IDZRVIT · 03-28-2010, 01:33 PM

Quote:

Originally Posted by molamann

Kics Project Magnetic Drain Plug: Evasive Motorsports | PH: 626.336.3400 Mon-Fri, 9am-6pm PST

That's what I have, recommended by AK. Perhaps you may want something like that seems it appears a bit more fail safe compared to the other.

Does that drain plug come with a permanent gasket such as neoprene for re-use?

JNguyen · 03-28-2010, 01:57 PM

Quote:

Originally Posted by Master_Ly

I have TiTek and have experienced no problems so far. It is very well crafted. I attached some pics to share. I actually was suppose to have the KICS but they called me and told me it was out of stock and they were going to ship me the TiTek, which are a little more expensive, so I didn't have to wait. I asked if there were any differences and they said the TiTek was what they actually recommend.

I'm guessing you order from Evasive cause I got the same bolt from them cause the kics were out. I love it better than the kics too

frost · 03-28-2010, 01:58 PM

Quote:

Originally Posted by spearfish25

Problem with this one is that there is very little magnet exposed for $hit to stick to. The protruding magnet has a lot more area to 'grab' particles.

x2

VCuomo · 03-28-2010, 04:02 PM

Quote:

Originally Posted by spearfish25

Problem with this one is that there is very little magnet exposed for $hit to stick to. The protruding magnet has a lot more area to 'grab' particles.

If that's not enough magnet to hold the metal particles in your oil, then that's the least of your worries...

NISSNISS370Z · 03-28-2010, 10:38 PM

Quote:

Originally Posted by VCuomo

If that's not enough magnet to hold the metal particles in your oil, then that's the least of your worries...

That's true, but why not have MORE magnet exposed, just makes more sense...it cant hurt....

Master_Ly · 03-29-2010, 10:50 PM

Quote:

Originally Posted by JNguyen

I'm guessing you order from Evasive cause I got the same bolt from them cause the kics were out. I love it better than the kics too

That is correct!

cobra · 05-08-2014, 08:11 PM

If the magnet would separate wouldn't it stay stuck at the bottom since it's a magnet, It would just stick to the pan.

Quote:

Originally Posted by RedNismo

Hi all,

I just purchased a Tiktek magnetic oil drain plug
TiTek Magnetic Drain Bolt
I am debating if I should use it. It looks kinda danagerous if the magnet falls off inside the oil pan. Has anyone experienced any problems with Titek magnetic plugs?

gbrettin · 05-08-2014, 08:21 PM

Food for thought - The OEM rear diff has a magnet built into the drain plug.

Shotta · 05-08-2014, 10:08 PM

Quote:

Originally Posted by spearfish25

No kidding.

The things we find to worry about when we love our possessions...

I'm going to start the "windshield wiper blade looks like it could fall off and just fly away" thread shortly.

Happen to me about 5 years ago (not in 370). My drivers side wiper blade and arm flew off on the highway in the middle of a crazy snow storm. So I drove the remaining hour home with my drivers window all the way down' arm hanging out the window with the snow brush, heat cranked so I didn't freeze to death.

kenchan · 05-08-2014, 10:20 PM

he already fixed it. sold car.

SouthArk370Z · 05-09-2014, 12:13 AM

Quote:

Originally Posted by cobra

If the magnet would separate wouldn't it stay stuck at the bottom since it's a magnet, It would just stick to the pan.

If the bolt is ferrous, the magnet should "stick" to the bolt. If the bolt is aluminum or other non-ferrous material, it may fall into the pan. IIRC, the pan is Al, so there's nothing for it the stick to there.

Shouldn't do any harm if it does fall out. It should fall to the bottom of the pan and stay there. It could possibly block the oil pump inlet but all the rotating parts are above the oil level in the pan. Not that I would want one loose in my oil pan, but it wouldn't be the end of the world.

While I'm sure it's happened to someone along the way, I've never heard of the magnet falling out in the 40+ years I've been working around cars. I wouldn't lose any sleep over it.

synolimit · 05-09-2014, 04:19 AM

Quote:

Originally Posted by SouthArk370Z

If the bolt is ferrous, the magnet should "stick" to the bolt. If the bolt is aluminum or other non-ferrous material, it may fall into the pan. IIRC, the pan is Al, so there's nothing for it the stick to there.

Shouldn't do any harm if it does fall out. It should fall to the bottom of the pan and stay there. It could possibly block the oil pump inlet but all the rotating parts are above the oil level in the pan. Not that I would want one loose in my oil pan, but it wouldn't be the end of the world.

While I'm sure it's happened to someone along the way, I've never heard of the magnet falling out in the 40+ years I've been working around cars. I wouldn't lose any sleep over it.

Pans steel. Mines a pain in the *** to thread back in because it sticks to the side and won't go back into the hole lol. You try to install it straight in but then all of a sudden its attracted to the side and boom it shoots over an sticks. You have to like scrape it along the pan till you get to the hole then push it in. I don't know what mine is but its an extremely strong neodymium magnet.

SouthArk370Z · 05-09-2014, 08:31 AM

Quote:

Originally Posted by synolimit

Pans steel. ...

In that case, if the magnet falls out, it should "stick" to the pan and stay put.

soxfan69 · 05-09-2014, 01:45 PM

Quote:

Originally Posted by gbrettin

Food for thought - The OEM rear diff has a magnet built into the drain plug.

Oh no.. something else to worry about

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
USPS delivered a few goodies today! - Short Trow Shifter & Magnetic Drain Plug	kdo2milger	Engine & Drivetrain	34	04-22-2011 04:43 PM
ordered a magnetic drain plug will this fit?	370zproject	Engine & Drivetrain	5	02-20-2010 11:37 PM
Replacement Drain Plug?	Solus	Engine & Drivetrain	10	02-17-2010 01:12 PM
Don't go to the dealership for oil drain plug washer	YamahaR6	Nissan 370Z General Discussions	20	11-28-2009 01:50 PM

05-08-2014, 08:21 PM	#24 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,284 Drives: Tricycle Rep Power: 589151	Food for thought - The OEM rear diff has a magnet built into the drain plug.

05-08-2014, 10:20 PM	#26 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	he already fixed it. sold car.