What do people think of Clear Bra Paint Protection?

miguez · 05-20-2009, 05:49 AM

Got my Mitsubishi Outlander kit installed. Kit came as advertised, and I chose the InvisiMask film instead of 3M. Some orange peel, but really not much at all, and it seems pretty much every film from every manufacturer has a certain amount of this.

This was a partial hood (1/3), partial fender (to match where the hood piece ends), and mirrors.

Started the install with the fender piece, which was the easiest of this kit, after watching the instructional video that ship with it. Install is not hard, but requires a little experience. I made a couple of small mistakes on this piece. One was I left a small bubble, which I was able to remove with the syringe. The other was the film is pretty stretchy, and you have to stretch it a bit in some areas due to the curvature of your car. That's fine, but if you try and stretch too much you get small little white lines (stretch marks).

Moved on to the hood piece and it worked great. Ended up with just one bubble which again the syringe removed no problem. The interesting part is as I first laid it on to the wet hood (you use soap and water so the film doesn't stick at first, then squeegee it out), it is clear it is cut a little smaller than what it needs to cover, so you start by fixing the center, then slightly stretching both sides so they reach the left and right sides of the hood.

The mirrors were interesting, as the film is obviously flat when glued to the backing paper it ships in, but the curvature of most mirror housings, including the one in my wife's Mitsu, is curved both in the horizontal and vertical, like a small section of a ball, so the film wants to stay flat while you squeegee it around. It just takes about 5 minutes of continuous squeegeeing and it conforms.

All in all, a good experience. I am going to order and do the bumper next, which will be one level up in difficulty, then will report back.

Asheth · 05-20-2009, 08:34 AM

Umm I posted this a while ago dont know if this helps anyone find or place a order for Ventureshield.

Ventureshield?!?

miguez · 05-23-2009, 04:50 AM

Quote:

Originally Posted by Asheth

Umm I posted this a while ago dont know if this helps anyone find or place a order for Ventureshield.

Ventureshield?!?

Can you buy VentureShield films to apply it yourself? I can only seem to find dealers, not the kits.

05-20-2009, 08:34 AM	#2 (permalink)
Asheth Track Member Join Date: Dec 2008 Location: Glen Burnie, Maryland Posts: 917 Drives: 09 Blk 6mt Rep Power: 18	Umm I posted this a while ago dont know if this helps anyone find or place a order for Ventureshield. Ventureshield?!? __________________ 180 customs Headlights - Yantech Backup Camera - Projekt 1 - Stillen Gen 3- EVO-R V2 Foglight, EVO-R CF Diffuser, Carbon Fiber Element Steering wheel - Fast Intentions TDX/RHFC's - RJM A.F.P. - Z1 Oil Cooler - 2015 Nismo Conversion.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FAQ: Clay Bars & Paint Restoration	Alexus	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	16	05-10-2010 11:45 AM
what is self healing paint?	370allout	Exterior & Interior	28	03-29-2009 06:27 PM
370Z Clear Bra	Educ8r	Nissan 370Z General Discussions	23	03-06-2009 10:12 AM
Optional JDM Clear taillights	MC	Nissan 370Z General Discussions	11	12-01-2008 09:52 PM
Unhappy people watch TV, happy people read/socialize, says study	AK370Z	The Lounge (Off Topic)	4	11-16-2008 05:56 AM

05-20-2009, 05:49 AM	#1 (permalink)
miguez Enthusiast Member Join Date: Apr 2009 Location: Columbus, Ohio Posts: 359 Drives: '04 Cavalier Rep Power: 182	Got my Mitsubishi Outlander kit installed. Kit came as advertised, and I chose the InvisiMask film instead of 3M. Some orange peel, but really not much at all, and it seems pretty much every film from every manufacturer has a certain amount of this. This was a partial hood (1/3), partial fender (to match where the hood piece ends), and mirrors. Started the install with the fender piece, which was the easiest of this kit, after watching the instructional video that ship with it. Install is not hard, but requires a little experience. I made a couple of small mistakes on this piece. One was I left a small bubble, which I was able to remove with the syringe. The other was the film is pretty stretchy, and you have to stretch it a bit in some areas due to the curvature of your car. That's fine, but if you try and stretch too much you get small little white lines (stretch marks). Moved on to the hood piece and it worked great. Ended up with just one bubble which again the syringe removed no problem. The interesting part is as I first laid it on to the wet hood (you use soap and water so the film doesn't stick at first, then squeegee it out), it is clear it is cut a little smaller than what it needs to cover, so you start by fixing the center, then slightly stretching both sides so they reach the left and right sides of the hood. The mirrors were interesting, as the film is obviously flat when glued to the backing paper it ships in, but the curvature of most mirror housings, including the one in my wife's Mitsu, is curved both in the horizontal and vertical, like a small section of a ball, so the film wants to stay flat while you squeegee it around. It just takes about 5 minutes of continuous squeegeeing and it conforms. All in all, a good experience. I am going to order and do the bumper next, which will be one level up in difficulty, then will report back.