370z running higher oil temperature after oil change

16SportZ

So I had my oil changed by a Nissan dealership that I normally go to each time. I had them put in my usual oil (Castrol Full Synthetic 5W-30), and I also had them install the Greddy Magnetic Oil Drain Plug. After the oil change I could immediately tell something was off about the car. My oil temps are averaging 10 degrees hotter than they were before the oil change. I usually cruise at 185 or so and now it stays at 195-200 when I am not even getting on it. It even stays at these higher temperatures in 60F or 80F outside temperatures. When I get on the car it comes back down to 200 and never lower when it used to drop to 185.. It is a 2016 370z Sport Tech by the way. There is only one time this has happened previously and that was when I first bought the car and took it to the dealership and they put the wrong oil in (0W-20) from their bulk they use for other cars. I had them correct it but I didn't find out they did this until 3k miles later. Every time I go in for an oil change I bring my own oil and filter ever since. Any ideas? I scheduled another oil change and I am going to have them put back in the OEM drain plug because I think that the magnetic piece on the Greddy plug might be heating up and causing the surrounding oil to read at a higher temperature. Just a thought. Any help would be appreciated!

I have a dashcam and I watch them live every time I bring it in. You can watch the oil change I'm referring to here:

https://youtu.be/TUWACaBSLH0

Rusty

Drain plug has nothing to do with heating the oil up. What ever gave you this idea?

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

Spooler

What you are describing above is normal. You also have a factory oil stabilizer on that model unless you have removed it when installing an oil cooler. I see nothing to worry about.

vtec to vvel

The temps you listed is within normal ranges.

Also, why not DIY the oil changes?

__________________
Don't like what I post? Too bad. I really don't give a sh!t

MZ DAIZY

Not speaking for the OP, but the reason why I don’t DIY is because it’s not worth the time or effort. I found a local Indy shop that changes my oil for $40, BUT rotates the tires, checks the brakes, alignment, fluids, etc. something not easily done on my back with Jack stands on a gravel driveway.

Oh, and he flushes my clutch reservoir for $30 as long as I supply the Motol.

__________________
Stillen Gen 3 CAI, Fast Intentions CBE, Z1 34 Row Oil Cooler, Ecuteck Tuned by Dave at Z1, Clear Bra, Z1 Hood Stuts

Averying

$40 is potentially cheaper than going and buying oil & filter to DIY. I wouldn’t be surprised if a normal shop is charging ~$100 for synthetic changes nowadays.

I know a lot of people are using fluid not available at a quick-change shop (redline, amsoil, etc) so that warrants a DIY change


Sent from my iPhone using Tapatalk

__________________
2009 Sport Touring | Platinum Graphite | GTM Stage 1 Supercharger | BC BR Coilovers | Hotchkis Swaybar | Z1 FUCAs | AME TM-02 Wheels | Z1 2-piece Front Rotors | Z1 Clutch & Flywheel | Invidia Gemini Catback | GTM Resonated Test Pipes

MZ DAIZY

I’ve paid up to 100+ for synthetic changes. Always changed it at 5,000 miles. Now I pay $40 and change it every 3,000. I’m lucky to have found this guy. And he will give me a discount if I supply my own oil, but I see no reason to do that.

__________________
Stillen Gen 3 CAI, Fast Intentions CBE, Z1 34 Row Oil Cooler, Ecuteck Tuned by Dave at Z1, Clear Bra, Z1 Hood Stuts

vtec to vvel

In a rare instance like this, it would make more sense to take it into your guy. For the OP, seems like he would worry about taking his car to the dealer for a simple oil change, when he could be doing it himself.

And how far out into the boonies from Atlanta did you move to?

__________________
Don't like what I post? Too bad. I really don't give a sh!t

40 to 332

I agree with Rusty.

Based on your earlier experience, have you considered the possibility that your "usual oil" was put aside (inadvertently) by the service rep at the front desk of the dealership and not brought to the attention of the oil change "technician", who simply followed his/her regular routine and went to the bulk drum of 0W-20 oil and pumped that into your car? In other words, are you certain that they used the Castrol 5W-30 that you provided?

Rusty

Be glad that you don't have a class A motorhome. It was over $800 to change the oil and grease it. It's one of the reasons I no longer have it.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

Spooler

How many gallons of oil did it take? My 5.9 Cummins takes 3 gallons. To change the oil, the bypass oil filter and the oil filter it is around 170 bucks for the stuff to do it.

Rusty

5 gallons, 2 oil filters, 2 fuel filters, 100's of hidden grease fittings.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

MZ DAIZY

Not far enough!

__________________
Stillen Gen 3 CAI, Fast Intentions CBE, Z1 34 Row Oil Cooler, Ecuteck Tuned by Dave at Z1, Clear Bra, Z1 Hood Stuts

filip00

DIY oil changes are a meditation thing. Sure, if you earn more than 50 bucks per hour, then mathematically speaking, it's cheaper to pay someone to do it than to do it yourself.... But working on my car myself gives that special connection to the car, and gives that satisfaction of driving something you built, not bought. It is very different feeling when you just cash out and someone installs everything you ask for, in comparison with doing it on your own. Plus, if you know what you're doing and got the right tools, it's really "fun" to do. I put fun here in quotes, because whoever did anything, knows that sometimes things don't go according to plans and 3h work easily becomes 13h
That all being said, if you're not the hands-on type of guy or you don't feel confident, it's better to pay a professional than to watch your wheel overtake you on the highway...

Rusty

When planning projects. Always triple the time you have planned for it. 1 hour job, plan on 3 hours.

The 2 hour job you are doing is one broken bolt away from becoming a 3 day chit show.

Murphy is a sadist, and he's watching you.

When things are going well. Somewhere along the line. You f#$ked up.

You don't have the time to do it once. But have the time to do it twice.

After you finish a project and think you are done. You find a handful of parts that you don't remember taking off, and don't remember where they go.

Attached Images

Too Tight.jpg (90.4 KB, 19 views)

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html