QuickJack

ZoomZ · 03-15-2021, 04:27 PM

I have 5000slx. Love it. I keep it in air all winter no issues.

Bought the Pinch weld blocks, works great, but hard to line up in slot. Just go slow. I'm gonna try taping on car first and see if it holds long enough to bring QJ up to them. I use small block+Pinch block.

zz

madwi · 03-15-2021, 09:09 PM

Quote:

Originally Posted by Rusty

That extra 3" means a lot to guys with big chests. I barely fit under JL's Z when helping him and Madwi installing the turbo.

My large muscular chest barely fit under Jlarson's ride on the quick jack.

My giant beer belly didnt help anything either.

Rusty · 03-15-2021, 09:17 PM

Quote:

Originally Posted by madwi

My large muscular chest barely fit under Jlarson's ride on the quick jack.

My giant beer belly didnt help anything either.

...........and you got your nipples pierced too from the safety wire.

madwi · 03-15-2021, 09:18 PM

Quote:

Originally Posted by Rusty

...........and you got your nipples pierced too from the safety wire.

Free piercings!

SonicVQ · 03-16-2021, 01:03 PM

PSA: Don't use the Quickjack on a plastic tiled floor, one side was ejected..

This post from my37.com is a little scary:
https://www.myg37.com/forums/g37-sed...nary-tale.html

BettyZ · 03-23-2021, 06:01 PM

Quote:

Originally Posted by SonicVQ

PSA: Don't use the Quickjack on a plastic tiled floor, one side was ejected..

This post from my37.com is a little scary:
https://www.myg37.com/forums/g37-sed...nary-tale.html

That happened bc the OP didn't use a pinch weld block - which QJ sells - to lift the car. And the block was misaligned.

Sent from my SM-G955U using Tapatalk

Mrzoops · 06-28-2021, 01:57 AM

Here's my solution for lifting the 370Z to maximum height with a Quick Jack style hoist. I really like this type of hoist in my home garage for maintenance and cleaning. It was really worth it for me. Cheers!

Originally posted on Reddit: https://www.reddit.com/r/370z/commen...ck_jack_setup/

Slide1.JPG

Slide2.JPG

Slide3.JPG

Slide4.JPG

Slide5.JPG

BettyZ · 06-28-2021, 09:38 AM

interesting. I use the supplied smaller block under the pinch weld block.. and a sheet or two of 1/4 plywood under all that to ensure the blocks are flush with the lifting points before I raise her up.

Pro-tip - wrap the pinch weld blocks with hi-viz tape, and have a tape pennant running off each one. That way you don't drive off with the blocks still on the pinch welds.

runwhatyabrng · 06-28-2021, 01:53 PM

Alternative (but more expensive) provides 26 inches of lift and no concern of the car shifting forward in the environment as the lift goes up, it's a straight up lift and provides full side access (not for everyone)

I have no stake in it's sales (both units have strengths and weaknesses)

https://www.ezcarlift.com/

JARblue · 06-28-2021, 02:58 PM

Oooh I like that one... optional caster set seems pretty slick, too.

Mrzoops · 06-29-2021, 02:54 AM

Quote:

Originally Posted by BettyZ

interesting. I use the supplied smaller block under the pinch weld block.. and a sheet or two of 1/4 plywood under all that to ensure the blocks are flush with the lifting points before I raise her up.

Pro-tip - wrap the pinch weld blocks with hi-viz tape, and have a tape pennant running off each one. That way you don't drive off with the blocks still on the pinch welds.

Great thought! You would never see them once the car was back on the ground and likely would lose it. Good tip.

BettyZ · 06-29-2021, 08:17 AM

Quote:

Originally Posted by Mrzoops

Great thought! You would never see them once the car was back on the ground and likely would lose it. Good tip.

Thanks! Came up with it after I took the Z to the grocery and saw the blocks still on the rails walking across the parking lot lol

03-15-2021, 04:27 PM	#16 (permalink)
ZoomZ Track Member Join Date: Jan 2017 Location: Vancouver, BC Posts: 761 Drives: 17' 370Z Nismo Rep Power: 40617	I have 5000slx. Love it. I keep it in air all winter no issues. Bought the Pinch weld blocks, works great, but hard to line up in slot. Just go slow. I'm gonna try taping on car first and see if it holds long enough to bring QJ up to them. I use small block+Pinch block. zz BettyZ likes this.

03-16-2021, 01:03 PM	#20 (permalink)
SonicVQ Base Member Join Date: Jan 2016 Location: Ontario Posts: 230 Drives: G37 Sport Rep Power: 6720	PSA: Don't use the Quickjack on a plastic tiled floor, one side was ejected.. This post from my37.com is a little scary: https://www.myg37.com/forums/g37-sed...nary-tale.html JARblue, Rusty, Mick_12Nismo and 1 others like this.

06-28-2021, 01:57 AM	#22 (permalink)
Mrzoops Base Member Join Date: Mar 2021 Location: Queensland Posts: 7 Drives: 2016 Nissan 370z Rep Power: 4	370Z lifting setup Here's my solution for lifting the 370Z to maximum height with a Quick Jack style hoist. I really like this type of hoist in my home garage for maintenance and cleaning. It was really worth it for me. Cheers! Originally posted on Reddit: https://www.reddit.com/r/370z/commen...ck_jack_setup/ Slide1.JPG Slide2.JPG Slide3.JPG Slide4.JPG Slide5.JPG old guy, Zingston, BettyZ and 2 others like this.

06-28-2021, 09:38 AM	#23 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 38 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684371	interesting. I use the supplied smaller block under the pinch weld block.. and a sheet or two of 1/4 plywood under all that to ensure the blocks are flush with the lifting points before I raise her up. Pro-tip - wrap the pinch weld blocks with hi-viz tape, and have a tape pennant running off each one. That way you don't drive off with the blocks still on the pinch welds. ZontheRocks and Mrzoops like this. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

06-28-2021, 02:58 PM	#25 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Oooh I like that one... optional caster set seems pretty slick, too. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
QuickJack Lift System	TBatt	DIY Section (Do-It-Yourself)	252	02-22-2022 03:25 PM