FYI. 2010 nismo Front bumper conversion

Z34_TDogg

So I just recently had my 09-14 front nismo bumper painted and installed, bought the oem nismo front fender liners and the zspeed nismo aluminum undershroud. Turns out I also need the undershroud extension piece that connects the undershroud to the splitter on the front bumper. I’ve looked around everywhere for an aftermarket piece(was hoping it would be compatible with the zspeed undershroud) as the oem plastic one Nissan makes is $800.

I bought the 350z undershroud extender, but that doesn’t come close to fitting. Thought maybe I could drill new holes into it, but it is inches away still.
Just now I ended up buying the $800 oem plastic extender from Z1 motorsports, which should for sure fit correctly.

I’ve searched around on google hundreds of times and could barely find anything on anyone else having this problem.(most must not care for spending $800 for plastic lol). So I made this thread to hopefully help others out with the same problem.

Anyone that dealt with this problem in a way other than dropping $800 on the oem piece, it would be helpful to me and many other on what you did or what can be done to keep that front lip sturdy so it doesn’t bend in the wind.

350z nismo undershroud Extension


Zspeed aluminum Undershroud for nismo 370z

370z OEM nismo undershroud extension

Attached Images

	E87AEE0F-3E26-4A9D-A925-555A334A6ED6.jpg (278.5 KB, 118 views)
	BA872E0B-FBEA-42A2-BA4E-15C7D8B83431.jpg (276.4 KB, 115 views)