jacking points

axmea? · 01-30-2019, 10:43 PM

Front dimple and diff are my liftpoints. Start with a ramp similar to what jay noted for the fronts and jack it up. Can't do rear entry to get to the diff because of the exhaust. Can't use the ramp on the rear because the car is low and have side blades so once the fronts are raised high enough and on stands I roll the low profile floor jack from the side and reach the diff from there. It is quit tricky but get the job done. I don't go anywhere without the ramps just in case it is needed for service.

Desert Rat · 01-31-2019, 01:05 PM

Thanks guys. Knowing the diff works as a jacking point solves my issue. On the front, I drive it up on a couple boards to get enough clearance for the jack.

I mostly work on lifted 4x4s, so all my stuff is too big for a low little sports car....

mishuko · 01-31-2019, 02:58 PM

You can use the spare tire jack to get the car up to drop it on a stand.... ive done that a few times when i had to get under the front...

Desert Rat · 02-01-2019, 01:56 PM

Quote:

Originally Posted by mishuko

You can use the spare tire jack to get the car up to drop it on a stand.... ive done that a few times when i had to get under the front...

Ugh, no. I have a floor jack for a reason....lol

mishuko · 02-01-2019, 02:20 PM

Quote:

Originally Posted by Desert Rat

Ugh, no. I have a floor jack for a reason....lol

I usually don't go under the car. It was to swap my front pads once...

01-30-2019, 10:43 PM	#16 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,235 Drives: WELL ZED PW 6MT Rep Power: 53241	Front dimple and diff are my liftpoints. Start with a ramp similar to what jay noted for the fronts and jack it up. Can't do rear entry to get to the diff because of the exhaust. Can't use the ramp on the rear because the car is low and have side blades so once the fronts are raised high enough and on stands I roll the low profile floor jack from the side and reach the diff from there. It is quit tricky but get the job done. I don't go anywhere without the ramps just in case it is needed for service. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Jacking up your car with FI exhaust	abakja1	Intake/Exhaust	28	03-02-2021 04:52 PM
Lift/Jacking Points	exedy699	Nismo 370Z	9	12-16-2014 08:48 PM
Bent rear under brace from jacking the car at wrong jacking point.	IS2000	Brakes & Suspension	30	06-12-2013 08:33 AM
Amuse kit Lowered and Jacking?	memorylasts	DIY Section (Do-It-Yourself)	3	12-31-2011 12:03 PM
Tips for jacking up car?	blinkme323	Wheels & Tires	27	09-08-2010 09:20 AM

01-31-2019, 01:05 PM	#17 (permalink)
Desert Rat Base Member Join Date: Jun 2016 Location: Mesa, AZ Posts: 189 Drives: 2014 370Z M6 Base Rep Power: 3365	Thanks guys. Knowing the diff works as a jacking point solves my issue. On the front, I drive it up on a couple boards to get enough clearance for the jack. I mostly work on lifted 4x4s, so all my stuff is too big for a low little sports car....

01-31-2019, 02:58 PM	#18 (permalink)
mishuko A True Z Fanatic Join Date: Jul 2014 Location: bouncin on tigga Posts: 8,062 Drives: '12 Z Rep Power: 9435	You can use the spare tire jack to get the car up to drop it on a stand.... ive done that a few times when i had to get under the front...