Need tips for driving manual 370z

madwi · 09-14-2018, 04:02 AM

Quote:

Originally Posted by nandosman

I can turn wrenches and it took me several hours, but mostly because I'm 6'3 big guy, and had to take multiple breaks from the awful position you have to work in.

I am 6' and quite fat and I just installed the v3 last weekend. It is a breeze as all you have to do after removing oem pedal is two nuts to the CMC and a bolt on the top of the assembly. Hook the fork up and put the two sensors put back on and the plastic strikers. Done deal.
I do have to admit that I installed the v2 pedal a long time ago and my back hurt for a week afterwards trying to contort under the dash and reach tools.

dts3 · 09-14-2018, 08:02 AM

Quote:

Originally Posted by Cory Gillmore

After reading that product page that thing looks literally like a dream come true and is probably a must have for performance driving in the 370. $300 ain't too bad either! Probably another $300 in labor and it's still not too bad!

The clutch feel has always been my least favorite thing about my car and it made it a little harder than it needed to be for me to learn a manual transmission in a car. I hated how high up the engagement point was on the clutch pedal. And how stiff the pedal is. And how it seems like such a tiny engagement window for the difference between not moving and stalling the engine lol. I haven't stalled this car in probably 8 months but it was a rough couple of first months.

But I take it that means that smooth and fast 1-2 isn't possible with the factory assembly? Haha

EDIT: after a little more reading it seems the install is fairly easy. Is this true? Is it easy even for a disaster with a wrench like me? I installed my short ram intakes myself...

What really helped me to pickup smooth fast speed on 1-2 shitfs (and I still have a lot of work) was to work out getting back on the throttle fast enough. I was always slow to throttle coming out of first gear because I was so focused on the RPM drop

radix023 · 09-14-2018, 08:37 AM

Downshifting to a light I generally let revs drop to 1200 then downshift. From 3rd I go to neutral.

For sport/racing cornering, I will downshift a bit more aggressively (earlier) but I leave the transmission a gear longer than what I will apply power in. I only go to that gear when applying power. This is from decades of racing simulations when I realized that when transitioning in a corner an aggressive downshift may have left you with unwanted engine braking, hence I leave it a gear long to mitigate than and only do the last downshift to apply power. YMMV

The only way to be really smooth from 1-2 is to baby it and shift around 2k (economy shift). If you are hooning around, you are going to be a bit rough. You can't engage 2nd at 5k and not have your head move.

Where I find myself skipping gears is away from a traffic light. I give it some welly to get away from traffic then go to 6th/overdrive.

HEK · 09-14-2018, 09:17 AM

I learned how to drive stick at 14 and then I drove a tractor-trailer. The Z with its rev matching I hardly ever touch the brakes which I can see the person in my rear view mirror become disoriented as they do not see the brake lights but if I ever get rear-ended well a new Z and a lawsuit...anyway check this video
https://www.youtube.com/watch?v=yPihrjB37bg

falsereality · 09-14-2018, 01:58 PM

Quote:

Originally Posted by Cory Gillmore

After reading that product page that thing looks literally like a dream come true and is probably a must have for performance driving in the 370. $300 ain't too bad either! Probably another $300 in labor and it's still not too bad!

The clutch feel has always been my least favorite thing about my car and it made it a little harder than it needed to be for me to learn a manual transmission in a car. I hated how high up the engagement point was on the clutch pedal. And how stiff the pedal is. And how it seems like such a tiny engagement window for the difference between not moving and stalling the engine lol. I haven't stalled this car in probably 8 months but it was a rough couple of first months.

But I take it that means that smooth and fast 1-2 isn't possible with the factory assembly? Haha

EDIT: after a little more reading it seems the install is fairly easy. Is this true? Is it easy even for a disaster with a wrench like me? I installed my short ram intakes myself...

If you are small, flexible, and mechanically familiar then this install should be easy. It took me 3 hours to do a 1 hour job because it was a PITA to get where you need to be and see what you're doing.

mishuko · 09-14-2018, 07:58 PM

You can install it yourself in less than 2 hours

CRiZO · 09-15-2018, 01:15 AM

Sell it and buy an automatic. ;D
(almost serious. the stock clutch pedal is a POS. go RJM immediately.)

In general, clutches are cheap. Ride or feather it to your heart's content. Cars couldn't care less if you shift sequentially or skip gears. I've always skipped gears and my clutches lasted forever. Don't lug the engine.

Consider the clutch a torque modifier. The engine is doing it's own thing and doesn't want to struggle.

Cory Gillmore · 09-27-2018, 01:59 AM

What kind of life can we expect out of these clutches? I'm at 77k miles at the moment and all seems well so far/ I guess it depends on your driving style. What are some signs of a failing clutch?

ChopsZ · 09-27-2018, 08:30 AM

I'm going to come off sounding like a d!ck, but if you have to think and ask about how to drive a stick, you probably shouldn't be driving a stick.

mishuko · 09-27-2018, 09:54 AM

Quote:

Originally Posted by ChopsZ

I'm going to come off sounding like a d!ck, but if you have to think and ask about how to drive a stick, you probably shouldn't be driving a stick.

Litlte bit. I can say the clutch on the z is unique. High grab point like a race car but very numbed feeling for that bite.

Exedy clutch i find better personally.

The n-1-2 shifting are hardest for most in this car

dts3 · 09-27-2018, 10:05 AM

Quote:

Originally Posted by ChopsZ

I'm going to come off sounding like a d!ck, but if you have to think and ask about how to drive a stick, you probably shouldn't be driving a stick.

Everyone has to learn at some point.

FPenvy · 09-27-2018, 10:07 AM

tips on driving a manual Z.......

sell manual Z
buy 7AT Z
beat every manual Z.

very simple steps

JARblue · 09-27-2018, 10:53 AM

Quote:

Originally Posted by Cory Gillmore

What kind of life can we expect out of these clutches? I'm at 77k miles at the moment and all seems well so far/ I guess it depends on your driving style. What are some signs of a failing clutch?

I'm at 100K and the clutch still going strong. I've had to replace every part of the clutch hydraulic system except the factory hard lines. But the clutch is fine.

The synchros are probably more prone to wear than the clutch plate unless you don't know how to launch and do it a lot. My 5th gear synchro has been grinding since 20K miles - I just baby it to avoid the grind since no need for hard shifting into 5th gear on the street.

Jimbo370 · 09-27-2018, 03:07 PM

Yes I find gear shifting from 2nd to 6th gear at 45mph grinding all the time? He might want to try taking the spring out first(cheaper and smaller step)

ChopsZ · 09-27-2018, 03:30 PM

Quote:

Originally Posted by FPenvy

tips on driving a manual Z.......

sell manual Z
buy 7AT Z
beat every manual Z.

very simple steps

Only true in a straight line drag race. For daily fun on the streets, not so much.

09-14-2018, 08:37 AM	#18 (permalink)
radix023 Base Member Join Date: Mar 2017 Location: ATL Posts: 114 Drives: 2016-370z-silver-m6 Rep Power: 8	Downshifting to a light I generally let revs drop to 1200 then downshift. From 3rd I go to neutral. For sport/racing cornering, I will downshift a bit more aggressively (earlier) but I leave the transmission a gear longer than what I will apply power in. I only go to that gear when applying power. This is from decades of racing simulations when I realized that when transitioning in a corner an aggressive downshift may have left you with unwanted engine braking, hence I leave it a gear long to mitigate than and only do the last downshift to apply power. YMMV The only way to be really smooth from 1-2 is to baby it and shift around 2k (economy shift). If you are hooning around, you are going to be a bit rough. You can't engage 2nd at 5k and not have your head move. Where I find myself skipping gears is away from a traffic light. I give it some welly to get away from traffic then go to 6th/overdrive. Cory Gillmore likes this.

09-14-2018, 09:17 AM	#19 (permalink)
HEK Enthusiast Member Join Date: Apr 2009 Location: WESTFIELD, MA Age: 66 Posts: 491 Drives: '13 Z Tour Sports 6m Rep Power: 660	I learned how to drive stick at 14 and then I drove a tractor-trailer. The Z with its rev matching I hardly ever touch the brakes which I can see the person in my rear view mirror become disoriented as they do not see the brake lights but if I ever get rear-ended well a new Z and a lawsuit...anyway check this video https://www.youtube.com/watch?v=yPihrjB37bg Cory Gillmore likes this. Last edited by HEK; 09-14-2018 at 09:21 AM.

09-14-2018, 07:58 PM	#21 (permalink)
mishuko A True Z Fanatic Join Date: Jul 2014 Location: bouncin on tigga Posts: 8,062 Drives: '12 Z Rep Power: 9435	You can install it yourself in less than 2 hours Cory Gillmore likes this.

09-15-2018, 01:15 AM	#22 (permalink)
CRiZO Track Member Join Date: Nov 2017 Location: Dallas Posts: 672 Drives: in traffic Rep Power: 20698	Sell it and buy an automatic. ;D (almost serious. the stock clutch pedal is a POS. go RJM immediately.) In general, clutches are cheap. Ride or feather it to your heart's content. Cars couldn't care less if you shift sequentially or skip gears. I've always skipped gears and my clutches lasted forever. Don't lug the engine. Consider the clutch a torque modifier. The engine is doing it's own thing and doesn't want to struggle. Cory Gillmore and Jap**Vet* like this.

09-27-2018, 08:30 AM	#24 (permalink)
ChopsZ Track Member Join Date: May 2016 Location: Central Florida Age: 49 Posts: 965 Drives: 2016 370Z GM 6MT Rep Power: 2301	I'm going to come off sounding like a d!ck, but if you have to think and ask about how to drive a stick, you probably shouldn't be driving a stick. __________________ She's For Sale! PERFORMANCE: Aero Workz \| Akebono \| BC Racing \| EcuTek \| HKS \| MaxBore \| Motordyne \| Nismo \| RJM \| SPL \| StopTech \| Z1 AUDIO: Arc Audio \| Bazooka \| Helix \| Pioneer \| Stereo Integrity

09-27-2018, 01:59 AM	#23 (permalink)
Cory Gillmore Base Member Join Date: Nov 2017 Location: Memphis TN Posts: 113 Drives: 09 Sport/Touring MT Rep Power: 3363	What kind of life can we expect out of these clutches? I'm at 77k miles at the moment and all seems well so far/ I guess it depends on your driving style. What are some signs of a failing clutch?

09-27-2018, 03:07 PM	#29 (permalink)
Jimbo370 Enthusiast Member Join Date: Jan 2014 Location: Florida Posts: 466 Drives: 09 black 370z MT Rep Power: 11	Yes I find gear shifting from 2nd to 6th gear at 45mph grinding all the time? He might want to try taking the spring out first(cheaper and smaller step)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MSR Houston driving tips	ltullos	Track / Autocross / Drifting / Dragstrip	0	02-18-2018 06:14 PM
Driving Tips	Nismoracer	Nismo 370Z	8	01-27-2011 09:03 PM
driving manual hard	jacknismo	Nissan 370Z General Discussions	95	07-21-2010 10:15 AM
Any harm to switching from auto mode 'D' to manual mode and back while driving?	Lee123	Engine & Drivetrain	14	05-19-2010 08:10 PM
7AT: Does driving in manual mode change the way automatic shifts?	dandg	Nissan 370Z General Discussions	2	02-13-2009 02:28 PM