2nd Page of the Instructions of Installing...

Dwight Frye · 12-29-2009, 08:14 PM

I live in CA which is a front plate required state. Some cars I looked at on dealer lots had the plates installed and most had damage behind the plates from the overly long screw tips. The car I bought did not have the bracket or plate installed and when prepping it I told the dealer NFW to put it on or the deal was off. I've only been given a ticket once for no front plate and I'll continue to take my chances.

OldGuy · 12-29-2009, 08:36 PM

Quote:

Originally Posted by speedworks

It wouldn't suprise me that is says to do that. I have a front plate (required in my state), and after 1 year, I have two holes there because of the screws that hold the plate on - unfortunately, but realistically, they are too long, and stick into the bumper - not sure if this only happens when the wind pressure pushes the plate back or not, but if I look behind my plate, there are two screws jutting into the bumper into about that area where those holes are. If I ever move to another state, I would have to keep a plate on just to hide the marks. Another small mistake by Nissan.

When I objected, my dealer simply found two small matching black screws he inserted into the holes and no one knows there's anything there but me. They should always ask first---especially if the buyer, like me, is from out of state.

kannibul · 12-29-2009, 08:54 PM

wow...WTF.

HapHazard · 12-29-2009, 10:29 PM

Quote:

Originally Posted by PapoZalsa

I puke in my mouth a little everytime I see this picture.

370Z_Fan · 06-07-2010, 06:36 PM

I wonder what's behind those 1 inch holes? Do you think rain or water/moisture will get in behind those holes easier and possibly corrode whatever is behind those holes?

Trips · 06-07-2010, 06:47 PM

Wow 95% is high but i'm happy to be in the 5% with no dealer holes, and I'm Cali.

KillerBee370 · 06-07-2010, 07:03 PM

Quote:

Originally Posted by Forrest

I live and bought my car in CALI, which requires front plates. North Bay Nissan in Petaluma never puts plates in. I would be mad if i had huge holes in mine like that.

Maybe that's the point. A deterent against NOT putting a front license plate on. Stupid idea though and mine didn't have these ridiculous holes in it.

PapoZalsa · 06-07-2010, 09:18 PM

WOW, this came back alive. Nissan replaced the bumper, but I'm sure that all kind of water and moisture would get in those holes.

However the Hall Nissan dealership body shop SUCKS!

MightyBobo · 06-07-2010, 09:19 PM

Quote:

Originally Posted by 370Z_Fan

I wonder what's behind those 1 inch holes? Do you think rain or water/moisture will get in behind those holes easier and possibly corrode whatever is behind those holes?

Not much - just the crush bar really, and the temp sensor.

370Z_Fan · 06-07-2010, 11:20 PM

My front plate does not sit flush with the bracket. Should I be asking my dealer to drill those 1 inch holes so that the j-nuts will fit and the plate will lie flush with the bracket?

MightyBobo · 06-07-2010, 11:34 PM

Quote:

Originally Posted by 370Z_Fan

My front plate does not sit flush with the bracket. Should I be asking my dealer to drill those 1 inch holes so that the j-nuts will fit and the plate will lie flush with the bracket?

Can you take a picture?

either way the answer is no though, more than likely lol. Those holes are a crime...

370Z_Fan · 06-08-2010, 12:32 AM

Quote:

Originally Posted by MightyBobo

Can you take a picture?

either way the answer is no though, more than likely lol. Those holes are a crime...

Sorry about the picture quality, it came from my crappy 1.3 megapixel camera phone. This picture was taken top down. The orange arrow indicates the license plate bracket. The red arrow indicates the license plate. The blue double arrow indicates the gap between the plate and the license plate bracket. And the yellow arrow indicates the j-nut that sits between the plate and the license plate bracket. As you can see, the plate does not lie flush with the bracket.

MightyBobo · 06-08-2010, 12:40 AM

Thats...really crappy haha. I dont even know wtf Im looking at really, other than the license plate :-p. I need a better angle from the front to go with it, if you would, from the front/side.

Josh@STILLEN · 06-08-2010, 12:56 AM

Quote:

Originally Posted by MightyBobo

Thats...really crappy haha. I dont even know wtf Im looking at really, other than the license plate :-p. I need a better angle from the front to go with it, if you would, from the front/side.

It gets better when you give it a second.. he's saying the plate itself isn't flush with the bumper on both sides.

My question would be, is it 'flush' pointing forward, so that the plate appears to be straight if looking at it dead on, versus from up top.

If they're going for 'effectiveness' in making your plate visible, they probably shot for the plate being flush to the front, rather than flush with the curves of the front fascia.

PapoZalsa · 06-08-2010, 09:04 AM

Quote:

Originally Posted by Josh@STILLEN

It gets better when you give it a second.. he's saying the plate itself isn't flush with the bumper on both sides.

My question would be, is it 'flush' pointing forward, so that the plate appears to be straight if looking at it dead on, versus from up top.

If they're going for 'effectiveness' in making your plate visible, they probably shot for the plate being flush to the front, rather than flush with the curves of the front fascia.

That is the "reason" supposdely for the holes too...

06-07-2010, 06:47 PM	#21 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,730 Drives: 🔰 Rep Power: 10	Wow 95% is high but i'm happy to be in the 5% with no dealer holes, and I'm Cali. __________________

06-07-2010, 09:18 PM	#23 (permalink)
PapoZalsa A True Z Fanatic Join Date: Nov 2009 Location: Not in Sunny Florida Posts: 6,358 Drives: 16 Nismo w/Tech Pack Rep Power: 4499	WOW, this came back alive. Nissan replaced the bumper, but I'm sure that all kind of water and moisture would get in those holes. However the Hall Nissan dealership body shop SUCKS! __________________ 2009 370Z MB Base w/Sport Package 6MT Modshack's Custom Air Intakes /3M Clear Bra/ Illuminated Kick Plates / F. I CBE w/12" resonators / EVO-R Front Lip / Rear Hatch Wing / Tein S-Tech Springs /Ilegal Tint in the Rep. of VA/4x20mm Z1 Spacers/ Vinyl Roof/Liquid Carbon Designs

06-08-2010, 12:40 AM	#28 (permalink)
MightyBobo A True Z Fanatic Join Date: Feb 2009 Location: Las Vegas, NV Posts: 8,465 Drives: No cars; only bikes Rep Power: 52	Thats...really crappy haha. I dont even know wtf Im looking at really, other than the license plate :-p. I need a better angle from the front to go with it, if you would, from the front/side. __________________ I don't own a car anymore.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bottom of the page link back to previous page?	rench	The370Z.com Feedback, Suggestions & Questions	3	10-29-2009 07:16 AM
Anyone have instructions on Hatchback removal?	shesha	Exterior & Interior	3	05-29-2009 11:27 PM
Home Page Not Working?	ADmaster71690	The370Z.com Feedback, Suggestions & Questions	11	05-23-2009 08:10 PM
Mud Flap Instructions	jpit	Exterior & Interior	1	05-08-2009 12:16 AM
DIY request - Headunit / Speaker Install instructions	355890	Audio & Video	6	04-07-2009 08:55 AM

12-29-2009, 08:14 PM	#16 (permalink)
Dwight Frye Enthusiast Member Join Date: Jul 2009 Location: Occupied California Posts: 423 Drives: '09 Tour/Sport/6MT Rep Power: 16	I live in CA which is a front plate required state. Some cars I looked at on dealer lots had the plates installed and most had damage behind the plates from the overly long screw tips. The car I bought did not have the bracket or plate installed and when prepping it I told the dealer NFW to put it on or the deal was off. I've only been given a ticket once for no front plate and I'll continue to take my chances.

12-29-2009, 08:54 PM	#18 (permalink)
kannibul A True Z Fanatic Join Date: Jun 2009 Location: Jenks, OK Posts: 2,281 Drives: 370z Touring/Sport Rep Power: 267	wow...WTF.

06-07-2010, 06:36 PM	#20 (permalink)
370Z_Fan Base Member Join Date: Apr 2009 Location: Toronto, ON Posts: 238 Drives: 2010 MB ZR sport pkg Rep Power: 16	I wonder what's behind those 1 inch holes? Do you think rain or water/moisture will get in behind those holes easier and possibly corrode whatever is behind those holes?

06-07-2010, 11:20 PM	#25 (permalink)
370Z_Fan Base Member Join Date: Apr 2009 Location: Toronto, ON Posts: 238 Drives: 2010 MB ZR sport pkg Rep Power: 16	My front plate does not sit flush with the bracket. Should I be asking my dealer to drill those 1 inch holes so that the j-nuts will fit and the plate will lie flush with the bracket?