Anyone in S.California have spare rims I can rent?

motoextreme · 12-14-2009, 09:19 PM

Thanks man but its too much of a hassle and no tires laying around. Its ok, I'll just get it done once the car comes back. If I'm lucky enough to find new rims I can afford then it will be a quick switch once the paint it done.

Appreciate the thought though man! Very cool

molamann · 12-14-2009, 09:44 PM

Np.

Mr Ed · 12-15-2009, 06:37 AM

If you lived in Australia you could have taken my low rent cheap *** 18" rims. They're sitting in my garage. Done only 250kms in them.

I put Enkei 19" GTC-01 rims on them the first week I got the car.

motoextreme · 12-15-2009, 10:15 AM

HAHAHA...thanks Mr Ed, all good brother, too funny.

I'm an Aussie myself, born in Melbourne. Sound like a Yank now though since I've been here so long.

Have pics of your car with rims? I'm still trying to find an aftermarket set I want but havent looked at Enkei's yet.

G Fo12ce · 12-16-2009, 12:46 AM

Quote:

Originally Posted by motoextreme

Still not sure which ones to go with. I want to make sure which ever ones I go I dont go too much lower, I dont want it to rub on speedbumps like some of the threads I've read.

I've had HKS on 4 cars and loved them. I hear good thing about KW as well. I can't say on the other brands.

motoextreme · 12-16-2009, 01:07 AM

Do you happen to know if I can keep the stock height and still have a little room if they start to sag? I keep hearing "they are fully adjustable" however I want to make sure that max height doesnt leave me too low. I only have about 3.5" of clearance, much less and I'll rub...I'm a tad gunshy from past low cars I've owned.

sensi09 · 12-16-2009, 02:17 AM

Don't know for sure, but from my past experience with KW from other cars, at max ride height you will still be lower than stock.

motoextreme · 12-16-2009, 02:26 AM

Yeah, that's my concern. I want to be able to take it to stock height when using it as my daily driver. lowered cars are tough for me as my driveway is difficult for both my Corp office and home.

I did this on a Porsche Turbo I used to have. Went a little nuts on the mods (nothing new there) only to find the exhaust killed me, the aftermarket clutch was unbearable in traffic (too stiff) and the height would rub everywhere. Stressed me out driving the damn thing and didnt feel like dealing with the hassle of putting it back to stock so I lost my A$$ and sold it. Bummer too as the car was pretty fun and I lost even more $ on its replacement.

I need to keep looking. Probably should just leave it as is but would like the ability to stiff it up a bit, lower it a tad and take it to the track a few times a year. Thanks for the heads up

sensi09 · 12-16-2009, 02:33 AM

You might consider the KW HLS system KW hydraulic lift system /// KW HLS helps lowered vehicles with low ground clearance to clear obstacles

Though it might only raise the front

12-14-2009, 09:19 PM	#46 (permalink)
motoextreme Track Member Join Date: Nov 2009 Location: Chino Hills, CA Posts: 971 Drives: Nismo NO MODS! Rep Power: 369	Thanks man but its too much of a hassle and no tires laying around. Its ok, I'll just get it done once the car comes back. If I'm lucky enough to find new rims I can afford then it will be a quick switch once the paint it done. Appreciate the thought though man! Very cool __________________ Fast Intensions / NST / Mishimoto / Alpine / JDM / Volk / Brembo / Rotora / Seibon / Stillen / Password: JDM / KW / MR Works / RAW / Sun Auto / B&M / Amplified Motorsports

12-15-2009, 10:15 AM	#49 (permalink)
motoextreme Track Member Join Date: Nov 2009 Location: Chino Hills, CA Posts: 971 Drives: Nismo NO MODS! Rep Power: 369	HAHAHA...thanks Mr Ed, all good brother, too funny. I'm an Aussie myself, born in Melbourne. Sound like a Yank now though since I've been here so long. Have pics of your car with rims? I'm still trying to find an aftermarket set I want but havent looked at Enkei's yet. __________________ Fast Intensions / NST / Mishimoto / Alpine / JDM / Volk / Brembo / Rotora / Seibon / Stillen / Password: JDM / KW / MR Works / RAW / Sun Auto / B&M / Amplified Motorsports

12-16-2009, 01:07 AM	#51 (permalink)
motoextreme Track Member Join Date: Nov 2009 Location: Chino Hills, CA Posts: 971 Drives: Nismo NO MODS! Rep Power: 369	Do you happen to know if I can keep the stock height and still have a little room if they start to sag? I keep hearing "they are fully adjustable" however I want to make sure that max height doesnt leave me too low. I only have about 3.5" of clearance, much less and I'll rub...I'm a tad gunshy from past low cars I've owned. __________________ Fast Intensions / NST / Mishimoto / Alpine / JDM / Volk / Brembo / Rotora / Seibon / Stillen / Password: JDM / KW / MR Works / RAW / Sun Auto / B&M / Amplified Motorsports

12-16-2009, 02:26 AM	#53 (permalink)
motoextreme Track Member Join Date: Nov 2009 Location: Chino Hills, CA Posts: 971 Drives: Nismo NO MODS! Rep Power: 369	Yeah, that's my concern. I want to be able to take it to stock height when using it as my daily driver. lowered cars are tough for me as my driveway is difficult for both my Corp office and home. I did this on a Porsche Turbo I used to have. Went a little nuts on the mods (nothing new there) only to find the exhaust killed me, the aftermarket clutch was unbearable in traffic (too stiff) and the height would rub everywhere. Stressed me out driving the damn thing and didnt feel like dealing with the hassle of putting it back to stock so I lost my A$$ and sold it. Bummer too as the car was pretty fun and I lost even more $ on its replacement. I need to keep looking. Probably should just leave it as is but would like the ability to stiff it up a bit, lower it a tad and take it to the track a few times a year. Thanks for the heads up __________________ Fast Intensions / NST / Mishimoto / Alpine / JDM / Volk / Brembo / Rotora / Seibon / Stillen / Password: JDM / KW / MR Works / RAW / Sun Auto / B&M / Amplified Motorsports

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Replacement of Base Spare With Sports Pkg. Spare	GonGo	DIY Section (Do-It-Yourself)	7	05-18-2011 10:46 PM
Driving me spare	leep159	Europe	13	02-04-2010 08:30 AM
What to do with my spare?	srr2449	Parts for sale (Private Classifieds)	3	11-05-2009 01:11 PM
Spare parts anyone?	edeeZee	Nissan 370Z General Discussions	2	05-07-2009 02:27 AM
Getting rid of the spare?	wstar	Nissan 370Z General Discussions	21	04-16-2009 03:42 PM

12-14-2009, 09:44 PM	#47 (permalink)
molamann A True Z Fanatic Join Date: Jan 2009 Location: Los Angeles Posts: 1,666 Drives: 370Z with NAVVVVV Rep Power: 284	Np.

12-15-2009, 06:37 AM	#48 (permalink)
Mr Ed Base Member Join Date: Aug 2009 Location: Brisbane, Australia Posts: 162 Drives: 09 Nissan 370Z M6 Rep Power: 16	If you lived in Australia you could have taken my low rent cheap *** 18" rims. They're sitting in my garage. Done only 250kms in them. I put Enkei 19" GTC-01 rims on them the first week I got the car.

12-16-2009, 02:17 AM	#52 (permalink)
sensi09 Enthusiast Member Join Date: Dec 2008 Location: so cal Posts: 449 Drives: _ Rep Power: 17	Don't know for sure, but from my past experience with KW from other cars, at max ride height you will still be lower than stock.

12-16-2009, 02:33 AM	#54 (permalink)
sensi09 Enthusiast Member Join Date: Dec 2008 Location: so cal Posts: 449 Drives: _ Rep Power: 17	You might consider the KW HLS system KW hydraulic lift system /// KW HLS helps lowered vehicles with low ground clearance to clear obstacles Though it might only raise the front