What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

abm89 · 07-22-2022, 09:25 PM

Got my skirts installed. they're alright i guess. way better than my stock ones as far as condition. Also installed my new secondary O2 sensors. I think we still need to re-adjust the 93-base for the FF map because im on E23 and it's RICH lol. Either way, no driving until i get the nail out of my 305.... im about to bill the HOA for this ****. people doing work and not cleaning up, smh.

abm89 · 07-24-2022, 10:33 AM

Update: The car auto-corrected the fuel trims once i drove it around more lol. Now im not used to the lack of response on 93 hahaha. Oh well. once every few tanks isn't too bad.

I think the Downstream O2 sensors fixed the CEL. so far, no DTC codes.

Ben370 · 07-24-2022, 01:36 PM

Replaced my old dirty Z1 filters with new ones and restored my headlights. Removing them really helped me do a better job than last time 2 years ago. Also it was the Meguiar's kit instead of the 3M one so maybe it'll stay clear longer this time.

abm89 · 07-24-2022, 02:19 PM

I recently used the Meguiars kit on my mom's Z. So far so good.

Do you know what your intake temps are? Do you still have the foam impact absorber in your bumper? I ordered a new one thinking it can isolate the intakes from the heat a little better.

Ben370 · 07-24-2022, 06:53 PM

Yeah I still have the foam impact absorber. Don't know the temps.

BettyZ · 07-25-2022, 09:43 AM

Quote:

Originally Posted by abm89

I recently used the Meguiars kit on my mom's Z. So far so good.

Do you know what your intake temps are? Do you still have the foam impact absorber in your bumper? I ordered a new one thinking it can isolate the intakes from the heat a little better.

FWIW, all the foam impact absorber will do is reduce airflow to the intakes. If you want to isolate them from heat, get the Dewla DeZigns air intake scoop and put heat tape on the side facing the radiator.

abm89 · 07-25-2022, 12:16 PM

Quote:

Originally Posted by BettyZ

FWIW, all the foam impact absorber will do is reduce airflow to the intakes. If you want to isolate them from heat, get the Dewla DeZigns air intake scoop and put heat tape on the side facing the radiator.

I looked at that and it wont work with my driving light setup. edit: and weird 34 row center oil cooler

Oh well, it'll be ok haha.

BettyZ · 07-26-2022, 06:44 AM

Quote:

Originally Posted by abm89

I looked at that and it wont work with my driving light setup. edit: and weird 34 row center oil cooler

Oh well, it'll be ok haha.

Yeah I had to pull my driving lights too for it to work

abm89 · 07-26-2022, 10:31 PM

Ran some logs for Seb. Even though the fuel trims auto corrected, he wanted me to send some E24 logs to him. No CEL since replacing the downstream sensors. NGK/NTK is the correct brand for the secondary sensor if anyone wants to save money and not buy them from nissan.

abm89 · 08-03-2022, 02:52 PM

Inspection today. Cringed while the guy tried to pull in the car with the 6 puck clutch.

Passed while on E65 and all sensors enabled. Seb is the man!

JARblue · 08-03-2022, 02:54 PM

Quote:

Originally Posted by abm89

Inspection today. Cringed while the guy tried to pull in the car with the 6 puck clutch.

Passed while on E65 and all sensors enabled. Seb is the man!

Haha most places just ask me to pull it in. And it's only a stage 2 from Joe lol

Nice work

abm89 · 08-03-2022, 07:34 PM

Yeah, i really only trust the Winding Road guys with my car tbh lmao. but they dont do inspections.

Next up, install my NDF windshield banner because it is definitely going below the AS1 line a bit (hence why i got the inspection done beforehand. I dont know why they're so picky about that when people roll around with TINTED windshields)

I am also thinking of going back to the OEM hood and installing the vent louvers in the center.

INV_MY_370 · 08-06-2022, 04:49 PM

Designed some caps to be 3d printed for the stock strut tower bolts and eather be painted or like i did hand layed real carbon fiber

Sent from my GM1917 using Tapatalk

INV_MY_370 · 08-06-2022, 04:52 PM

Also designed some simple 3d printed TPU inserts to fix the hatch springs. Now only need to push the button once.

Sent from my GM1917 using Tapatalk

R1talin · 08-06-2022, 09:58 PM

I need these in my Z’s life!

07-22-2022, 09:25 PM	#6046 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,386 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	Got my skirts installed. they're alright i guess. way better than my stock ones as far as condition. Also installed my new secondary O2 sensors. I think we still need to re-adjust the 93-base for the FF map because im on E23 and it's RICH lol. Either way, no driving until i get the nail out of my 305.... im about to bill the HOA for this ****. people doing work and not cleaning up, smh. God-Speed, ZontheRocks, redondoaveb and 1 others like this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

07-24-2022, 10:33 AM	#6047 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,386 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	Update: The car auto-corrected the fuel trims once i drove it around more lol. Now im not used to the lack of response on 93 hahaha. Oh well. once every few tanks isn't too bad. I think the Downstream O2 sensors fixed the CEL. so far, no DTC codes. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

07-24-2022, 01:36 PM	#6048 (permalink)
Ben370 Base Member Join Date: Mar 2016 Location: Virginia Posts: 71 Drives: [SOLD] 09 Tour/Sport Rep Power: 3364	Replaced my old dirty Z1 filters with new ones and restored my headlights. Removing them really helped me do a better job than last time 2 years ago. Also it was the Meguiar's kit instead of the 3M one so maybe it'll stay clear longer this time. abm89 and ZontheRocks like this.

07-24-2022, 02:19 PM	#6049 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,386 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	I recently used the Meguiars kit on my mom's Z. So far so good. Do you know what your intake temps are? Do you still have the foam impact absorber in your bumper? I ordered a new one thinking it can isolate the intakes from the heat a little better. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

07-26-2022, 10:31 PM	#6054 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,386 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	Ran some logs for Seb. Even though the fuel trims auto corrected, he wanted me to send some E24 logs to him. No CEL since replacing the downstream sensors. NGK/NTK is the correct brand for the secondary sensor if anyone wants to save money and not buy them from nissan. God-Speed, JARblue, sx moneypit and 3 others like this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

07-24-2022, 06:53 PM	#6050 (permalink)
Ben370 Base Member Join Date: Mar 2016 Location: Virginia Posts: 71 Drives: [SOLD] 09 Tour/Sport Rep Power: 3364	Yeah I still have the foam impact absorber. Don't know the temps.

08-03-2022, 02:52 PM	#6055 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,386 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	Inspection today. Cringed while the guy tried to pull in the car with the 6 puck clutch. Passed while on E65 and all sensors enabled. Seb is the man! JARblue and redondoaveb like this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

08-03-2022, 07:34 PM	#6057 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,386 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	Yeah, i really only trust the Winding Road guys with my car tbh lmao. but they dont do inspections. Next up, install my NDF windshield banner because it is definitely going below the AS1 line a bit (hence why i got the inspection done beforehand. I dont know why they're so picky about that when people roll around with TINTED windshields) I am also thinking of going back to the OEM hood and installing the vent louvers in the center. JARblue likes this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

08-06-2022, 04:49 PM	#6058 (permalink)
INV_MY_370 Base Member Join Date: Mar 2018 Location: Illinois Posts: 84 Drives: 2012-Gun Metallic-MT Rep Power: 3362	Designed some caps to be 3d printed for the stock strut tower bolts and eather be painted or like i did hand layed real carbon fiber Sent from my GM1917 using Tapatalk TreeSemdyZee, God-Speed, madwi and 5 others like this.

08-06-2022, 04:52 PM	#6059 (permalink)
INV_MY_370 Base Member Join Date: Mar 2018 Location: Illinois Posts: 84 Drives: 2012-Gun Metallic-MT Rep Power: 3362	Also designed some simple 3d printed TPU inserts to fix the hatch springs. Now only need to push the button once. Sent from my GM1917 using Tapatalk TreeSemdyZee, JARblue, Rusty and 8 others like this.

08-06-2022, 09:58 PM	#6060 (permalink)
R1talin Base Member Join Date: Mar 2017 Location: FL - Florida Posts: 60 Drives: 16 370z Nismo 6MT Rep Power: 6718	I need these in my Z’s life! __________________ Motordyne ART Pipes/Shockwave Exhaust, Stillen Long Tube CAI, Fortune Auto Coil-Overs, Z1 - Urethane Motor & Transmission Mounts/Subframe Bushing Collars/Solid Diff Bushings & Brace/34 Row Oil Cooler/Sway Bars/End Links, BTUNED Ecutek Tune

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 10:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 09:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM