What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

SLOPOS

I guess whoever owned my Z before me really did baby it because at 24k miles when I got it there was no axle click but after 500 miles with me it started. Just got done with the fix, but had to use 4 washers on each side and the torque settings are going to be all screwy. I torqued to 88, but one was a 1/8 turn off and one was about a 1/4 turn off to get the cotter pins in. So 88lbs plus 1 ugga-dugga on one side and 3 ugga-duggas ok the other. Drives perfect, no noise, hopefully this fixes it for a while/forever. Also found an undeveloped section of road off of a nearby highway on ramp and made sure the axles were fine with some donuts.

abm89

Picked up the Top Secret lip yesterday! New tow strap arrived today. Just patiently waiting on my bumper to be finished and some parts to cover up the holes next to the fangs. I might throw the Thunder pipe in for the spring/summer. I think Seb is done with my tune so it's time to enjoy the car! I was following my buddy's straight-piped NSX and i'd be lying if I said it wasn't fun to be loud sometimes.

__________________
Complete Parts List:
https://github.com/abm89/ztouge-build

Tractionless

I recommend complete removal of old brake fluid from the entire system and refilling as if you only remove the fluid from the reservoir all of the existing fluid will still be left in the lines and calipers, i.e. the "business end".

I use a digital brake fluid tester to determine the percent of water in the fluid and change when greater than 2%.

__________________
Toys Not Tots

abm89

New bumper and lip installed! Still waiting on some parts, but it's nice having a bumper that fits properly.

__________________
Complete Parts List:
https://github.com/abm89/ztouge-build

ZontheRocks

Varis lip is sweet.

__________________
'16 Pearl White Sport | Stillen Gen. 3 | Motordyne ART | Motordyne Shockwave | ZSpeed | Powertrix | EVO-R | Aeroworkz | Nismo | Z1 | EcuTek | Tuned by Seb @ SpecialtyZ

JARblue

No diagnosis yet - I told Kevin it's not a priority since I bought another car. So I dropped off CJM RRP kit and billet top hat along with oil pressure and wide-band AFR gauges to get installed on the Z while she is at the shop.

__________________

abm89

Ahem, Top Secret (adjusts monocle)

__________________
Complete Parts List:
https://github.com/abm89/ztouge-build

SeeThruHead

I ordered two door cards from the states. They decided for whatever reason to package them with the doors facing out. with a single layer of cardboard. The foam on both doors is punctured and unusable.

Not sure what to do with it. Since I can migrate the parts i wanted onto my doors with intact foam. But definitely no longer worth what I paid for them.

__________________
My Build thread STH Build Plan Thread
Images too big fix here

babyzilla

Weekend Z Warrior Project: 99% complete

This is my 2015 black 6mt tech 370z Nismo. I bought her in 2018 with 8k miles, and she currently sits at 51k miles. I used to daily drive my Z through all four seasons, so as you can imagine it had its fair share of bumps and bruises, but I enjoyed every moment. Last year I had the opportunity to turn my Z into a garage queen. It was an idea that I went back and forth on for quite some time as I wasn't sure what exactly I wanted to do. I figured it would be expensive too. I enjoyed driving it like I stole it every day because that's what I bought it for and that's what it's meant for. On the other hand, this Z is one of my favorite cars...in the world. I was even contemplating on selling my Z (especially with the high resale values within the past two years) in anticipation of the new Z, but I changed my mind. They just don't make cars like these anymore and as life moves on IDK if I'll have another chance of enjoying something like this. Fortunately I was in a position to move forward with my plan of making it into a garage queen and I decided to essentially recondition and modify the car. I spent months researching and figuring out the direction I wanted to go. I wanted to keep it NA for reliability and budget reasons and I wanted to bring it back to show room finish. So, that's exactly what I did. Below is a list of what was completed (apart from general maintenance):

Performance Mods:
Exhaust
FI TDX CBE
Brakes
Z1 Slotted rotors
Centric Posi Quiet sport brake pads
Intake
Z1 MAF intake hose
aFe drop-in filter
ECU
Ecutek HW
License
Custom tune
Transmission
ZSpeed stage 1 clutch and flywheel assembly w/ CMAK
Suspension
Swift Spec-R lowering springs
SPL camber kit ( FUCAs, rear cambers arms, SPC toe bolts)
Z1 eccentric bolt lockout/elimination kit
Z1 poly rear diff bushings

Aesthetic Mods:
Carbon Fiber OEM style steering wheel
Seibon TS Style carbon fiber hood
Momo Anzio (Front 19x9.5, offset +20; Rear 19x11, offset +19)
15mm spacers 2x rear
Refinish front
Painted front bumper
Applied XPEL PPF to entire front end
Applied XPEL ceramic coating to hood

Other than the ZSpeed clutch assembly being installed around May of 2019 due to the OEM assembly failure, the rest of the mods began Nov of 2021.

There are only two things left to be done. I'm waiting for the brakes and rotors to wear out naturally prior to prematurely installing the Z1 slotted rotors and new pads. I have them and they are ready to go. Lastly, my tune is scheduled for next week, so I'm looking forward to that. A potential third item might be Koni Yellows once the OEM shocks/struts fail.

The only other things I wanted to do but did not were porting the lower and upper manifolds and install headers. With regards to porting the upper and lower manifolds, aside from the additional expense, I couldn't find enough concrete evidence proving the gains. Most local shops wouldn't do it, and I didn't want to bother with the whole core swapping process. Next, I already knew going catless was a no-go for me - just didn't want to deal with it. The next best option, IMO, was the Z1 STH paired with the VQ35DE stock cats or some other HFC. Not only would the hardware be expensive, but I have learned swapping headers in these cars is a major PITA which equated to significant shop costs. I guess this turned out well for me because when I called my Z shop to schedule a tune, they asked if I had modified my cats. Apparently more and more shops aren't tuning cars running catless or HFC and cops are cracking down on the shops that are. IDK how true this is, but I believe them because they are a well known and respectable Z shop on the East coast.

Anyways, all that being said, this was a great experience. Other than the two items mentioned earlier, I actually completed my project and am thoroughly enjoying my revamped Z. It was certainly an expensive project, but I learned a lot about the Z and cars in general. So, for that, it was worth it to ME. I probably wouldn't do this again to another car because I already got what I wanted out of the process. And, no, I'm not just saying "I'm done" lol I actually have to be as I have other responsibilities and I know when to draw the line. I must say, though, owning the Z has exposed me to so many different things in life that I otherwise wouldn't have had the opportunity to. I don't want to sound materialistic, but it's true and I'm sure many Z owners understand what I'm talking about!

Hope you guys enjoy the pic of my Z

Attached Images

Screenshot 2022-04-15 11.47.11 PM.jpg (73.5 KB, 34 views)

Z Runner

Finished CF dash today.

abm89

Today, I ripped out my Kenwood dash cam and replaced it with a Viofo A129 Duo (4K). I was not pleased with the potato quality of the cam, even though it was seamlessly integrated with the head unit.

__________________
Complete Parts List:
https://github.com/abm89/ztouge-build

BettyZ

Reinstalled my modded bellworks diff brace. Had yanked it to loan to Carp so he could start pumping out his own model.

Significant mods are now done for the driving season.

Shaved down the right thigh bolster on my Sparco to get me closer to 90* to steering wheel. Yanking the console out tomorrow to rattle hunt.

Weather is good enough Thursday to bed in the new Yellowstuff pads and get some logs now that fuel return is installed.

Sent from my SM-G955U using Tapatalk

__________________
'14 MB Nismo | Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs.
Betty Mods

cv129

One of the best bang for buck, and actual true 4k quality…unlike many others at the same price range with their false advertising. Congrats!

__________________
Setrab | RE-71 | SPL | JRZ | Nismo | ARK | Whiteline | RacingBrake | CJM Oil Pan | Ti shield

abm89

Ty, I already had a Viofo 1080p in my WRX which has excellent quality. CPL filters for the lenses too.

__________________
Complete Parts List:
https://github.com/abm89/ztouge-build

JARblue

I'm pretty pleased with the Thinkware U1000 dash cam I put on the Z. Supposed to be 4K front and 2K rear and I believe it. It is very likely I'll get the same setup for my new daily driver.

__________________