What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

Inflaymes · 03-16-2022, 04:39 AM

I just buy a sheet of 2 inch pink styrofoam insulation and cut it in 4 pieces... I park on that. Works for me.

Quote:

Originally Posted by Darkmann

Car has been in storage on Race Ramp tire flat-spot stopper. I also have my Z32 in storage, no flat stopper. This is the first time using the Race Ramp hardware - or any flat spot stopper. We have had pleasantly surprisingly nice mid-70s weather here in the Eastern Shore of MD, so I was curious if all that $$$$ on Race Ramps did anything for me. Yes it did, HUGE difference during first many miles (20 or so) miles of driving to de-stress the tires, when I took both cars out past weekend. Both cars have low profile summer Z rated tires with no less that 90% tread. While the Z32 was bopping and bouncing (hard to drive over 60 mph), the Z34 was smooth. I was really impressed and am ordering a set for the Z32.

Averying · 03-18-2022, 09:17 AM

Busy day(s) ahead! Basically all fluids, supercharger oil/filter, air filter, and street pads to swap in for the carbotechs.

Sent from my iPhone using Tapatalk

Doc's Z · 03-19-2022, 08:23 AM

I've been busy the last week or so:

First, I installed new Michelin PS4s, 305/30 in the rear and 265/35 in the front.

I went ahead and purchased the R7 along with a Blendmount. Install took less than a half-hour. This thing has saved my bacon a few times.

My 21-year old son, who still enjoys spending time with his old man, helped me install my door door handle covers and hood. For additional safety, we went ahead and installed a set of Quik-Latch QL-38-LP/BP Lockable hood pins.

babyzilla · 03-19-2022, 09:32 AM

My brother had the same z (stock). One of the best gen/combo IMO. Love the mods and happy to hear your kid helped you with them!

BTW...what's the rj11/45 connection for on the radar?

Averying · 03-19-2022, 09:54 AM

Quote:

Originally Posted by babyzilla

My brother had the same z (stock). One of the best gen/combo IMO. Love the mods and happy to hear your kid helped you with them!

BTW...what's the rj11/45 connection for on the radar?

Agreed! The two tone V1 nismos are my favorite Z. I’d love to upgrade to one of those one day.

Sent from my iPhone using Tapatalk

babyzilla · 03-19-2022, 10:06 AM

Yeah, I wish he still had his so we could both have nismos

the only thing I thought it was lacking were the recaros. The lack of tech package could easily be fixed with an aftermarket unit, and the chrome headlights have several options to black out.

Doc's Z · 03-19-2022, 01:12 PM

Quote:

Originally Posted by babyzilla

My brother had the same z (stock). One of the best gen/combo IMO. Love the mods and happy to hear your kid helped you with them!

BTW...what's the rj11/45 connection for on the radar?

You use the RJ11 to hardwire the detector to the mirror.

cv129 · 03-19-2022, 05:24 PM

Geez....I think I have to do the door handle cover on the wife's car now. Which vendor did you buy the handle cover from?

Also, great if you would comment on the fitment. I've heard many complaints CF handle covers being a little off on sizes, and some custom touches needed. It's been a deterrent for me.

Quote:

Originally Posted by Doc's Z

:

Averying · 03-20-2022, 08:04 PM

Quote:

Originally Posted by KapitalZ

Mounted two AEM X-Series gauges - oil pressure and water temp - on Oritz Custom Pods RHD dual pillar pods.

https://www.aemelectronics.com/produ...auges/x-series https://www.ortizcustompods.com/nissan.html

How’s the quality on the Ortiz pillar pods?

Sent from my iPhone using Tapatalk

Dreadnaught · 03-21-2022, 10:15 PM

Installed a new driver side door lock actuator today. For some lovely reason the inner door panel was riveted to the window track assembly unlike the other side which I have done. So, I just took off the two lower left hand bolts and bent the dog sh1t out of it in order to gain access to the cable that goes to the door handle and the wiring harness that connects to the door lock actuator.

It sure was fun to snake the old one out and to snake the new one in. I broke the rear window glass sash so I'll be buying a new one from Nissan soon and replacing that since I'm the biggest anal bead on the string.

JARblue · 03-22-2022, 09:54 AM

Quote:

Originally Posted by Dreadnaught

Installed a new driver side door lock actuator today. For some lovely reason the inner door panel was riveted to the window track assembly unlike the other side which I have done. So, I just took off the two lower left hand bolts and bent the dog sh1t out of it in order to gain access to the cable that goes to the door handle and the wiring harness that connects to the door lock actuator.

The inner panel was riveted on both of my doors. I just drilled them out.

Dreadnaught · 03-22-2022, 10:01 AM

Quote:

Originally Posted by JARblue

The inner panel was riveted on both of my doors. I just drilled them out.

I'll do that next time I have to take apart this area of the door again. My drill is broken.

Dreadnaught · 03-22-2022, 10:04 AM

In the next couple of weekends I'll be installing a new rear main seal, pilot bushing, flywheel, clutch, pressure plate and csc. Should be fun times doing the job on jack stands. All OEM parts will be used.

babyzilla · 03-22-2022, 11:41 AM

Last week I started getting some shop quotes to install my aftermarket parts and do some maintenance work on my Z. I have been using Hill's Garage (they are great), but they don't have an alignment system, so I've been trying to find a shop that has one and can do all the work while the car is there rather than bouncing around multiple shops. I was surprised to see how much the quotes varied (installing the rear diff bushings is expensive af)! Today I decided to go with Kinetic Autoworks. Dave was very communicative, the shop is familiar with Zs/Gs so he helped walk me thru some things, and their quote was reasonably priced. Some shops just don't pick up, or they get back to you days later. I'm sure they're busy, idk.

I have the following things to be done: CBE, FUCAs, rear camber arms and toe bolts, poly rear diff bushings, clutch fluid and diff fluid flush, and alignment. Lastly, I'll need to go back to Hill's for an EcuTek tune, and I'll finally be done my project (I did some other things prior)! I'll be sure to update back on here once everything is done with a list of all the modifications. Hopefully I have a positive experience with this new shop.

People seem to laugh when I say I'm about to complete my project lol. I get what they're saying, but I had to draw the line somewhere and actually have other responsibilities! I definitely learned a lot more about my car though (and made some mistakes along the way) which was great.

Doc's Z · 03-22-2022, 12:17 PM

Quote:

Originally Posted by cv129

Geez....I think I have to do the door handle cover on the wife's car now. Which vendor did you buy the handle cover from?

Also, great if you would comment on the fitment. I've heard many complaints CF handle covers being a little off on sizes, and some custom touches needed. It's been a deterrent for me.

I had nothing but issues with the vendor and won't mention them - I'll take the high road. I can share that the door handle covers were not plug-and-play. The outer covers fit fine, but the inner door handle pieces required some modification to fit properly. The process wasn't difficult, but it was time consuming because I had to sand, test fit, sand some more, etc.

03-19-2022, 08:23 AM	#5898 (permalink)
Doc's Z Base Member Join Date: May 2016 Location: Arkansas Age: 51 Posts: 47 Drives: '14 Nismo/Golf cart Rep Power: 10075	I've been busy the last week or so: First, I installed new Michelin PS4s, 305/30 in the rear and 265/35 in the front. I went ahead and purchased the R7 along with a Blendmount. Install took less than a half-hour. This thing has saved my bacon a few times. My 21-year old son, who still enjoys spending time with his old man, helped me install my door door handle covers and hood. For additional safety, we went ahead and installed a set of Quik-Latch QL-38-LP/BP Lockable hood pins. God-Speed, JARblue, cv129 and 9 others like this. __________________ 2014 Solid Red *NISMO* 370z #211 \| AAM \| Diode Dynamics \| Morimoto \| Swift \| SPC \| SPL \| Z1\| Last edited by Doc's Z; 03-19-2022 at 08:32 AM.

03-19-2022, 09:32 AM	#5899 (permalink)
babyzilla Enthusiast Member Join Date: Apr 2017 Location: Maryland Posts: 487 Drives: 15 Nismo Tech 6MT Rep Power: 23631	My brother had the same z (stock). One of the best gen/combo IMO. Love the mods and happy to hear your kid helped you with them! BTW...what's the rj11/45 connection for on the radar? Hotrodz, Doc's Z and Averying like this.

03-21-2022, 10:15 PM	#5905 (permalink)
Dreadnaught Track Member Join Date: Dec 2009 Location: Farmington, Utah Posts: 582 Drives: 14 SR 370z 6MT Rep Power: 10140	Installed a new driver side door lock actuator today. For some lovely reason the inner door panel was riveted to the window track assembly unlike the other side which I have done. So, I just took off the two lower left hand bolts and bent the dog sh1t out of it in order to gain access to the cable that goes to the door handle and the wiring harness that connects to the door lock actuator. It sure was fun to snake the old one out and to snake the new one in. I broke the rear window glass sash so I'll be buying a new one from Nissan soon and replacing that since I'm the biggest anal bead on the string. __________________ Ford Diesel and Heavy Line Technician at your service.

03-22-2022, 10:04 AM	#5908 (permalink)
Dreadnaught Track Member Join Date: Dec 2009 Location: Farmington, Utah Posts: 582 Drives: 14 SR 370z 6MT Rep Power: 10140	In the next couple of weekends I'll be installing a new rear main seal, pilot bushing, flywheel, clutch, pressure plate and csc. Should be fun times doing the job on jack stands. All OEM parts will be used. JARblue, Hotrodz, old guy and 5 others like this. __________________ Ford Diesel and Heavy Line Technician at your service. Last edited by Dreadnaught; 03-22-2022 at 10:08 AM.

03-22-2022, 11:41 AM	#5909 (permalink)
babyzilla Enthusiast Member Join Date: Apr 2017 Location: Maryland Posts: 487 Drives: 15 Nismo Tech 6MT Rep Power: 23631	Last week I started getting some shop quotes to install my aftermarket parts and do some maintenance work on my Z. I have been using Hill's Garage (they are great), but they don't have an alignment system, so I've been trying to find a shop that has one and can do all the work while the car is there rather than bouncing around multiple shops. I was surprised to see how much the quotes varied (installing the rear diff bushings is expensive af)! Today I decided to go with Kinetic Autoworks. Dave was very communicative, the shop is familiar with Zs/Gs so he helped walk me thru some things, and their quote was reasonably priced. Some shops just don't pick up, or they get back to you days later. I'm sure they're busy, idk. I have the following things to be done: CBE, FUCAs, rear camber arms and toe bolts, poly rear diff bushings, clutch fluid and diff fluid flush, and alignment. Lastly, I'll need to go back to Hill's for an EcuTek tune, and I'll finally be done my project (I did some other things prior)! I'll be sure to update back on here once everything is done with a list of all the modifications. Hopefully I have a positive experience with this new shop. People seem to laugh when I say I'm about to complete my project lol. I get what they're saying, but I had to draw the line somewhere and actually have other responsibilities! I definitely learned a lot more about my car though (and made some mistakes along the way) which was great. JARblue, Hotrodz, ZontheRocks and 4 others like this. Last edited by babyzilla; 03-22-2022 at 11:47 AM.

03-19-2022, 10:06 AM	#5901 (permalink)
babyzilla Enthusiast Member Join Date: Apr 2017 Location: Maryland Posts: 487 Drives: 15 Nismo Tech 6MT Rep Power: 23631	Yeah, I wish he still had his so we could both have nismos the only thing I thought it was lacking were the recaros. The lack of tech package could easily be fixed with an aftermarket unit, and the chrome headlights have several options to black out.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 09:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 08:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM