What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

BettyZ · 03-10-2022, 10:05 PM

Quote:

Originally Posted by babyzilla

I'm sorry to hear that. I know every batch is a little different due to the molds and that it is rarely a perfect fit. I think that's part of the risk you take with these aftermarket carbon fiber hoods and being OK with the fitment. Fortunately for me, after playing with the hinges, bolts, and positioning, it fits pretty damn good. I'm very happy with it, I'm just hesitant on putting holes in it to use the hood pins I bought. I reused the factory hood hooks and everything seems to work just fine, but I've seen those videos where the hoods fly off the car SMH. Also, the instructions say to get it cleared again. I'm hoping applying PPF and ceramic coating will work in place of that, or even be better. Let me know if anyone has thoughts on this, please.
I'll post some pics tomorrow.
Did you try playing with the fitment?

Played with fitment all day. Issue is the hood actually curves in on the side by the battery compartment.

I put in Aerocatch pins. Utter PITA to install (about as bad as putting the trans back in alone with the Z on a quikjack) but ended up working well.

What was unfortunate was the hood started warping due to engine heat so the gap between hood and bumper is noticeably worse than stock. And I put the OEM rubbers back in

BettyZ · 03-10-2022, 10:15 PM

You can see the front fascia retainers

redondoaveb · 03-10-2022, 10:57 PM

Quote:

Originally Posted by BettyZ

You can see the front fascia retainers

You must get great airflow with that big gap in the front

A Black Z34 · 03-10-2022, 11:22 PM

Got the spacers on…looks way better overall…as much as I want to lower it, it is my daily so that’ll be something to sleep on.

Lvcky69 · 03-10-2022, 11:30 PM

Quote:

Originally Posted by babyzilla

Oh yeahhhh...going into work late was worth it. Fresh off the delivery truck!

Box was pretty beat up, so I was worried. Luckily, hood was undamaged. Time for PPF and ceramic coating

I remember the days when I received my cf hood and cf fenders from fly1.

But things have changed. Moved on to bigger and better things.

INV_MY_370 · 03-10-2022, 11:39 PM

3d printed in carbon fiber , and wrapped, fully designed my self

Sent from my GM1917 using Tapatalk

babyzilla · 03-11-2022, 09:51 PM

Quote:

Originally Posted by babyzilla

I'm sorry to hear that. I know every batch is a little different due to the molds and that it is rarely a perfect fit. I think that's part of the risk you take with these aftermarket carbon fiber hoods and being OK with the fitment. Fortunately for me, after playing with the hinges, bolts, and positioning, it fits pretty damn good. I'm very happy with it, I'm just hesitant on putting holes in it to use the hood pins I bought. I reused the factory hood hooks and everything seems to work just fine, but I've seen those videos where the hoods fly off the car SMH. Also, the instructions say to get it cleared again. I'm hoping applying PPF and ceramic coating will work in place of that, or even be better. Let me know if anyone has thoughts on this, please.
I'll post some pics tomorrow.
Did you try playing with the fitment?

I think the fit is almost perfect on both sides. The front may have a slightly larger gap than the OEM hood, but it doesn't bother me.

I got back back from work and attempted to install the aerocatch hood pins...I just couldn't do it lol I couldn't get my self to cut through the hood. It fits so well and secure with all three OEM hooks w/o any extra pressure compared to closing the OEM hood. I opened and closed the hood like 20 times double checking everything and it seems solid - no play or wiggle.

The other thing I was reading about was applying heat reflective material on the underside of the hood. I know you said you experienced additional warping of the hood. Did you apply this? My only concern is, wouldn't the heat just be reflected back to the engine...

SLOPOS · 03-13-2022, 02:50 PM

Installed an ikon OEM style wing today. Amazing quality for $130 factory paint matched. Install was super easy but I can't say it was comfortable drilling holes into a perfectly good car lol. It looks so good, very happy with the decision. My touring is one step away from being the perfect sport/touring without the silly s-mode

Averying · 03-13-2022, 09:06 PM

First Autocross of the season today. 28° F this morning, 7 year old RE11s, and a bumpy AF airstrip course. Let’s just say trying to put any power down out of the corners was a fun time…

ADSI club here in RI was a great time though. They use a mile long course (~90 seconds) with some fast sections pushing well into 3rd gear. So laid back compared to SCCA events. Got ~15 runs over the course of 3hrs with plenty of breaks to talk to other people throughout the day.

Sent from my iPhone using Tapatalk

Dreadnaught · 03-14-2022, 07:57 AM

I installed my brand new OEM black housing headlamps today. The car definitely looks more sporty and aggressive.

You should definitely remove the air filter housings so you can gain access to a plastic clip that is located at the inner corner of each housing. The clip goes around a wiring harness and guides them through this area of the car. If you do not remove this clip or just break it off if you decide to just do that you cannot remove the headlights even with the four bolts removed that bolt it in place and with the harness that controls the housing itself.

My neighbor pointed out to me that black housing headlamps even go along with my all black interior that 2014 model year Solid Red 370's only came with.

babyzilla · 03-14-2022, 08:51 AM

Quote:

Originally Posted by Dreadnaught

I installed my brand new OEM black housing headlamps today. The car definitely looks more sporty and aggressive.

You should definitely remove the air filter housings so you can gain access to a plastic clip that is located at the inner corner of each housing. The clip goes around a wiring harness and guides them through this area of the car. If you do not remove this clip or just break it off if you decide to just do that you cannot remove the headlights even with the four bolts removed that bolt it in place and with the harness that controls the housing itself.

My neighbor pointed out to me that black housing headlamps even go along with my all black interior that 2014 model year Solid Red 370's only came with.

IMO black housing headlamps make a huge difference. Plus, I hate chrome.

BettyZ · 03-14-2022, 12:46 PM

Quote:

Originally Posted by babyzilla

I think the fit is almost perfect on both sides. The front may have a slightly larger gap than the OEM hood, but it doesn't bother me.

I got back back from work and attempted to install the aerocatch hood pins...I just couldn't do it lol I couldn't get my self to cut through the hood. It fits so well and secure with all three OEM hooks w/o any extra pressure compared to closing the OEM hood. I opened and closed the hood like 20 times double checking everything and it seems solid - no play or wiggle.

The other thing I was reading about was applying heat reflective material on the underside of the hood. I know you said you experienced additional warping of the hood. Did you apply this? My only concern is, wouldn't the heat just be reflected back to the engine...

I did not apply it. The heat would def be reflected to the motor, and the idea behind heat reflective is so that the CF gel coat doesnt turn color. The warpage occurred at the front of the hood.

Rusty · 03-14-2022, 06:20 PM

Quote:

Originally Posted by redondoaveb

You must get great airflow with that big gap in the front

Like the gaps in his teeth.

babyzilla · 03-14-2022, 11:17 PM

Ever since I lowered my Z on Swift springs, I've been trying to figure out how to adjust the camber and all that good stuff. As usual, this forum educated me on what I needed to do. Originally I was just going to install the rear camber arms because I didn't think the front really needed much, but then I figured I might as well just gets some FUCAs for the front so when I align the car I can just be done with it. I ended up getting some SPC rear camber arms, but after talking to my friend who has SPL everything on his 300ZX and reading a lot more into the whole SPL vs SPC, I've decided to get the whole SPL camber kit. I found a guy who bought it for his G37 but never installed it and is selling his car...so I got a pretty good deal. Still, it was expensive AF compared to the SPC counterparts. I don't track my car and it's no longer my daily, but I just wanted to do it right. I honestly think it's overkill, but everyone talking about the SPCs snapping was enough for me to run the other way lol. Plus, the SPLs are made in the USA.

All that being said...my rear SPC camber arms are for sale on here!

INV_MY_370 · 03-15-2022, 09:25 PM

Wraped my front bumper, now its not just gun matlic , its now gunmetel grey brushed matalic

Sent from my GM1917 using Tapatalk

03-10-2022, 10:15 PM	#5882 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 38 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684371	You can see the front fascia retainers A Black Z34 likes this. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods Last edited by BettyZ; 03-10-2022 at 10:17 PM.

03-10-2022, 11:39 PM	#5886 (permalink)
INV_MY_370 Base Member Join Date: Mar 2018 Location: Illinois Posts: 84 Drives: 2012-Gun Metallic-MT Rep Power: 3362	3d printed in carbon fiber , and wrapped, fully designed my self Sent from my GM1917 using Tapatalk God-Speed, abm89, sx moneypit and 5 others like this.

03-13-2022, 09:06 PM	#5889 (permalink)
Averying Enthusiast Member Join Date: May 2018 Location: Rhode Island Posts: 478 Drives: '09 370Z, '03 G35 Rep Power: 14419	First Autocross of the season today. 28° F this morning, 7 year old RE11s, and a bumpy AF airstrip course. Let’s just say trying to put any power down out of the corners was a fun time… ADSI club here in RI was a great time though. They use a mile long course (~90 seconds) with some fast sections pushing well into 3rd gear. So laid back compared to SCCA events. Got ~15 runs over the course of 3hrs with plenty of breaks to talk to other people throughout the day. Sent from my iPhone using Tapatalk abm89, johnxxx, sx moneypit and 3 others like this. __________________ 2009 Sport Touring \| Platinum Graphite \| GTM Stage 1 Supercharger \| BC BR Coilovers \| Hotchkis Swaybar \| Z1 FUCAs \| AME TM-02 Wheels \| Z1 2-piece Front Rotors \| Z1 Clutch & Flywheel \| Invidia Gemini Catback \| GTM Resonated Test Pipes

03-14-2022, 07:57 AM	#5890 (permalink)
Dreadnaught Track Member Join Date: Dec 2009 Location: Farmington, Utah Posts: 582 Drives: 14 SR 370z 6MT Rep Power: 10140	I installed my brand new OEM black housing headlamps today. The car definitely looks more sporty and aggressive. You should definitely remove the air filter housings so you can gain access to a plastic clip that is located at the inner corner of each housing. The clip goes around a wiring harness and guides them through this area of the car. If you do not remove this clip or just break it off if you decide to just do that you cannot remove the headlights even with the four bolts removed that bolt it in place and with the harness that controls the housing itself. My neighbor pointed out to me that black housing headlamps even go along with my all black interior that 2014 model year Solid Red 370's only came with. ZontheRocks, redondoaveb, Averying and 2 others like this. __________________ Ford Diesel and Heavy Line Technician at your service.

03-14-2022, 11:17 PM	#5894 (permalink)
babyzilla Enthusiast Member Join Date: Apr 2017 Location: Maryland Posts: 487 Drives: 15 Nismo Tech 6MT Rep Power: 23631	Ever since I lowered my Z on Swift springs, I've been trying to figure out how to adjust the camber and all that good stuff. As usual, this forum educated me on what I needed to do. Originally I was just going to install the rear camber arms because I didn't think the front really needed much, but then I figured I might as well just gets some FUCAs for the front so when I align the car I can just be done with it. I ended up getting some SPC rear camber arms, but after talking to my friend who has SPL everything on his 300ZX and reading a lot more into the whole SPL vs SPC, I've decided to get the whole SPL camber kit. I found a guy who bought it for his G37 but never installed it and is selling his car...so I got a pretty good deal. Still, it was expensive AF compared to the SPC counterparts. I don't track my car and it's no longer my daily, but I just wanted to do it right. I honestly think it's overkill, but everyone talking about the SPCs snapping was enough for me to run the other way lol. Plus, the SPLs are made in the USA. All that being said...my rear SPC camber arms are for sale on here! Hotrodz and sx moneypit like this.

03-15-2022, 09:25 PM	#5895 (permalink)
INV_MY_370 Base Member Join Date: Mar 2018 Location: Illinois Posts: 84 Drives: 2012-Gun Metallic-MT Rep Power: 3362	Wraped my front bumper, now its not just gun matlic , its now gunmetel grey brushed matalic Sent from my GM1917 using Tapatalk SophiaZ, God-Speed, Hotrodz and 5 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 10:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 09:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM