What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

SeeThruHead · 02-17-2022, 10:36 PM

I didn't really think about it. I hate them, so I would have had to sell them. And bought new 18s for my sets of tires. Or bought new winter tires and put them on the 19s. Way too much trouble. Especially considering how quickly the deal had to go down, and the shortage of tires and wheels for purchase. Also there's a snowstorm happening right now, so kind of needed the winter tires.

babyzilla · 02-17-2022, 11:18 PM

Finally installed my new wheels. Love them!
Lowered on Swift Spec R springs. Front is perfect. Added 1inch adapters to the rear, but they still need some adjustment. If all else fails, I'll incorporate koni yellows.

babyzilla · 02-18-2022, 02:25 PM

Hey Guys, I tried to do some searching but didn't find the answer I was looking for. I also didn't want to hijack someone else's thread, so I hope this thread is OK to post my question considering it relates to what I just previously posted on here and it is on topic?..

I do not want coilovers and I only do commuting and spirited driving with my Z. I am lowered on Swift Spec R springs. The front came out perfect, but the rear has some negative camber on it. Will an alignment and some toe bolts fix this? The other issue is I rub at high speeds on bumps. This is why I think I need to add the konis. Plus, I heard the Konis with Swift springs is an amazing combo. I figured I could raise the back up slightly since they are adjustable. Will that fix the negative camber or will I still need toe bolts fix that after an alignment? Do I need other suspension hardware? Any input or experience is appreciated.

SLOPOS · 02-19-2022, 03:29 AM

Quote:

Originally Posted by INV_MY_370

Pics

Sent from my unknown using Tapatalk

If you ever have to do that again, grab a rag and pour some gasoline on it - should wipe the vht paint right off without hurting the lenses. Literally wipes right off and leaves you with haze free results. Tinting headlights is such a braindead thing to do - literally working against what they're designed to do lol.

INV_MY_370 · 02-19-2022, 04:29 AM

U think I didnt try this. I tryed break cleaner, acitone, gas, rubbing alcohal, and few other things. I have no clue what was on there. But ot wasnt any old paint out of a spray can.

Sent from my GM1917 using Tapatalk

SLOPOS · 02-20-2022, 09:19 PM

Got the akebonos installed! I didn't break anything, yay!

SLOPOS · 02-20-2022, 09:20 PM

Quote:

Originally Posted by INV_MY_370

U think I didnt try this. I tryed break cleaner, acitone, gas, rubbing alcohal, and few other things. I have no clue what was on there. But ot wasnt any old paint out of a spray can.

Sent from my GM1917 using Tapatalk

Oh jeeze, that's crazy. Came out great though!

INV_MY_370 · 02-20-2022, 09:23 PM

Yep all the way down to 10,000 grit paper making sure there very lil paper scratches as posable. Then finally the meguiars plastX

Sent from my GM1917 using Tapatalk

SLOPOS · 02-22-2022, 07:25 PM

Yay, no more front plate holes! I'm usually against carbon fiber that adds weight but I couldn't look at the holes anymore and got this used from a forum member for $80 shipped. Used some 3M 300LSE tape and pretty sure it's permanently bonded to the bumper now.

TreeSemdyZee · 02-22-2022, 07:34 PM

Quote:

Originally Posted by SLOPOS

Got the akebonos installed! I didn't break anything, yay!

Then you obviously didn’t do it right!

INV_MY_370 · 02-22-2022, 09:31 PM

Quote:

Originally Posted by SLOPOS

Yay, no more front plate holes! I'm usually against carbon fiber that adds weight but I couldn't look at the holes anymore and got this used from a forum member for $80 shipped. Used some 3M 300LSE tape and pretty sure it's permanently bonded to the bumper now.

Looks good, now get rid of that hamburger badge.

Sent from my GM1917 using Tapatalk

SLOPOS · 02-23-2022, 06:34 AM

Quote:

Originally Posted by INV_MY_370

Looks good, now get rid of that hamburger badge.

Sent from my GM1917 using Tapatalk

Every time I've ever used after market badges I ended up regretting it - they just never seem to be the same quality and fit as factory badges. Any you can suggest?

JARblue · 02-23-2022, 09:33 AM

The Z has been in the shop since Christmas. Finally picked it up yesterday. Glad I was able to reschedule today's trip to Dallas for better weather next week.

Been driving a crappy Mitsubishi Mirage G4 5spd lately. First got in the Z and was extremely surprised how unfamiliar it felt. About 1/4 miles and a few gear shifts later it feels like home

cv129 · 02-23-2022, 09:47 AM

Quote:

Originally Posted by SLOPOS

Every time I've ever used after market badges I ended up regretting it - they just never seem to be the same quality and fit as factory badges. Any you can suggest?

https://www.thezstore.com/page/TZS/CTGY/370z03b

I have the Z logo ones (not Evo R) on the wife's car and they felt like OEM. I will replace mine with the satin silver ones when I don't feel lazy.

NecioVato · 02-23-2022, 10:00 AM

Quote:

Originally Posted by JARblue

The Z has been in the shop since Christmas. Finally picked it up yesterday. Glad I was able to reschedule today's trip to Dallas for better weather next week.

Been driving a crappy Mitsubishi Mirage G4 5spd lately. First got in the Z and was extremely surprised how unfamiliar it felt. About 1/4 miles and a few gear shifts later it feels like home

Made it a point to go out yesterday for a drive bc you are right - it's COLD in the DFW right now and only going to get worse tonight with ice and whatnot.

02-17-2022, 10:36 PM	#5806 (permalink)
SeeThruHead Track Member Join Date: Jun 2020 Location: Toronto Posts: 716 Drives: Red '18 Sport Manual Rep Power: 23498	I didn't really think about it. I hate them, so I would have had to sell them. And bought new 18s for my sets of tires. Or bought new winter tires and put them on the 19s. Way too much trouble. Especially considering how quickly the deal had to go down, and the shortage of tires and wheels for purchase. Also there's a snowstorm happening right now, so kind of needed the winter tires. __________________ My Build thread STH Build Plan Thread Images too big fix here

02-23-2022, 09:33 AM	#5818 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	The Z has been in the shop since Christmas. Finally picked it up yesterday. Glad I was able to reschedule today's trip to Dallas for better weather next week. Been driving a crappy Mitsubishi Mirage G4 5spd lately. First got in the Z and was extremely surprised how unfamiliar it felt. About 1/4 miles and a few gear shifts later it feels like home NecioVato, Hotrodz, sx moneypit and 3 others like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 10:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 09:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM

02-18-2022, 02:25 PM	#5808 (permalink)
babyzilla Enthusiast Member Join Date: Apr 2017 Location: Maryland Posts: 487 Drives: 15 Nismo Tech 6MT Rep Power: 23631	Hey Guys, I tried to do some searching but didn't find the answer I was looking for. I also didn't want to hijack someone else's thread, so I hope this thread is OK to post my question considering it relates to what I just previously posted on here and it is on topic?.. I do not want coilovers and I only do commuting and spirited driving with my Z. I am lowered on Swift Spec R springs. The front came out perfect, but the rear has some negative camber on it. Will an alignment and some toe bolts fix this? The other issue is I rub at high speeds on bumps. This is why I think I need to add the konis. Plus, I heard the Konis with Swift springs is an amazing combo. I figured I could raise the back up slightly since they are adjustable. Will that fix the negative camber or will I still need toe bolts fix that after an alignment? Do I need other suspension hardware? Any input or experience is appreciated.

02-19-2022, 04:29 AM	#5810 (permalink)
INV_MY_370 Base Member Join Date: Mar 2018 Location: Illinois Posts: 84 Drives: 2012-Gun Metallic-MT Rep Power: 3362	U think I didnt try this. I tryed break cleaner, acitone, gas, rubbing alcohal, and few other things. I have no clue what was on there. But ot wasnt any old paint out of a spray can. Sent from my GM1917 using Tapatalk

02-20-2022, 09:23 PM	#5813 (permalink)
INV_MY_370 Base Member Join Date: Mar 2018 Location: Illinois Posts: 84 Drives: 2012-Gun Metallic-MT Rep Power: 3362	Yep all the way down to 10,000 grit paper making sure there very lil paper scratches as posable. Then finally the meguiars plastX Sent from my GM1917 using Tapatalk