What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

OldSkool · 09-27-2021, 11:13 AM

Quote:

Originally Posted by Doc's Z

I appreciate the comments. I didn't do much to my '12 Nismo and regretted it, so this project car has already been more enjoyable.

Love it Doc! That car is beautiful!

Where in Arkansas? I'm up in the NW corner...

Cheers, JC

ubermoore · 09-27-2021, 08:19 PM

Did some suspension work over the past couple of weekends. Powertrix coilovers, Hotchkiss front bar w/ SPL links, FUCAs, camber bars, and toe bolts. Topped it off with a new set of Forgestars.

Really happy so far, but I’ll probably end up talking myself into a set of mid links before too long. Adjusting toe with the eccentrics is a pain in the ***.

trent1331 · 09-28-2021, 11:08 AM

Quote:

Originally Posted by OldSkool

Love it Doc! That car is beautiful!

Where in Arkansas? I'm up in the NW corner...

Cheers, JC

Not who you replied to, but I'm in Fayetteville. Howdy neighbor!

SeeThruHead · 10-01-2021, 05:00 PM

some minor stuff today.

sportsman2003 · 10-01-2021, 05:32 PM

Put some new wheels on it.

370z-4.jpg

abm89 · 10-01-2021, 05:54 PM

Trying to motivate myself to disassemble the interior again ��

JARblue · 10-01-2021, 10:06 PM

Quote:

Originally Posted by abm89

Trying to motivate myself to disassemble the interior again ��

Come take a look at my living room and maybe it will inspire you

Zingston · 10-02-2021, 10:01 AM

Just washed, waxed and detailed interior of Z. Now on to the Jeep. Ugghh!

Doc's Z · 10-03-2021, 09:45 AM

Quote:

Originally Posted by OldSkool

Love it Doc! That car is beautiful!

Where in Arkansas? I'm up in the NW corner...

Cheers, JC

Sorry for the late response (I was traveling), but I'm approximately 45 minutes north of Little Rock.

abm89 · 10-03-2021, 01:41 PM

Almost finished. I ordered a bracket for the IC7, as I found a way to use the steering column to mount the dash safely. The custom one I printed won't work with the view i have from my seating position. The fuel level, signals, hi beam, and parking brake indicators all are functional, so I can legally run this as my primary dash in Texas based on inspection laws. Now to eat something and then put the car back together.

I double checked my voltage parameters for the zeitronix ethanol reading, but it still says 50% with out the pull-up resistor enabled, and 55% with the resistor enabled. Probably just shitty ethanol in Austin.

Hotrodz · 10-04-2021, 12:19 AM

Quote:

Originally Posted by abm89

Almost finished. I ordered a bracket for the IC7, as I found a way to use the steering column to mount the dash safely. The custom one I printed won't work with the view i have from my seating position. The fuel level, signals, hi beam, and parking brake indicators all are functional, so I can legally run this as my primary dash in Texas based on inspection laws. Now to eat something and then put the car back together.

I double checked my voltage parameters for the zeitronix ethanol reading, but it still says 50% with out the pull-up resistor enabled, and 55% with the resistor enabled. Probably just shitty ethanol in Austin.

Remember, in many states no the just call it flex fuel. I think has to be a minimum of 50 or 55%. The deal is you never know what you are going to get.

Sent from my SM-G965U using Tapatalk

Maldat · 10-04-2021, 01:48 AM

sideways 3 times , no fish tails , just a quick flick

JARblue · 10-04-2021, 10:03 AM

Quote:

Originally Posted by abm89

Probably just shitty ethanol in Austin.

Yup. That's one of the reason I haven't even considered switching over. I know guys that have never seen over 70% here in town. Ethanol content is low in Texas in general thanks to O&G.

abm89 · 10-04-2021, 10:34 AM

Quote:

Originally Posted by Hotrodz

Remember, in many states no the just call it flex fuel. I think has to be a minimum of 50 or 55%. The deal is you never know what you are going to get.

Sent from my SM-G965U using Tapatalk

Yeah, that's probably what it is. I'm irked at the fact that they advertise it as E85. I'm pretty sure you cant have anything below E70 at the pump if you advertise it as 85, but I'm not an expert in that area.

Here's a quick video of the temporary zip tie mount haha:

The cord sticking up is the usb cable to access the dash. I still need to fine tune some sensitivity settings for the ambient light sensor and the fuel level signal. I took a right turn at speed and it definitely gave me the low fuel warning lmaoooo

redondoaveb · 10-04-2021, 10:35 AM

Quote:

Originally Posted by Hotrodz

Remember, in many states no the just call it flex fuel. I think has to be a minimum of 50 or 55%. The deal is you never know what you are going to get.

Sent from my SM-G965U using Tapatalk

In So Cal the ethanol pumps actually have stickers on them that tell you what the minimum ethanol content is. There's a station within a mile from me but the sticker on their pumps state minimum 55% so you never know what you're going to get. There's a Propel station about 5 miles away and the sticker says minimum 72%. I usually see 82 to 83% on my gauge from Propel.

10-01-2021, 05:00 PM	#5644 (permalink)
SeeThruHead Track Member Join Date: Jun 2020 Location: Toronto Posts: 716 Drives: Red '18 Sport Manual Rep Power: 23498	some minor stuff today. Hotrodz likes this. __________________ My Build thread STH Build Plan Thread Images too big fix here

10-01-2021, 05:32 PM	#5645 (permalink)
sportsman2003 Base Member Join Date: Dec 2018 Location: In the moment Posts: 191 Drives: Sideways most times Rep Power: 11605	Put some new wheels on it. 370z-4.jpg God-Speed, Rusty, Hotrodz and 8 others like this.

10-01-2021, 05:54 PM	#5646 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,382 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	Trying to motivate myself to disassemble the interior again �� JARblue, Rusty, Hotrodz and 3 others like this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

10-02-2021, 10:01 AM	#5648 (permalink)
Zingston A True Z Fanatic Join Date: May 2017 Location: Florida Posts: 4,028 Drives: like it's a rental. Rep Power: 2684370	Just washed, waxed and detailed interior of Z. Now on to the Jeep. Ugghh! JARblue, Rusty, Hotrodz and 3 others like this.

10-03-2021, 01:41 PM	#5650 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,382 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	Almost finished. I ordered a bracket for the IC7, as I found a way to use the steering column to mount the dash safely. The custom one I printed won't work with the view i have from my seating position. The fuel level, signals, hi beam, and parking brake indicators all are functional, so I can legally run this as my primary dash in Texas based on inspection laws. Now to eat something and then put the car back together. I double checked my voltage parameters for the zeitronix ethanol reading, but it still says 50% with out the pull-up resistor enabled, and 55% with the resistor enabled. Probably just shitty ethanol in Austin. JARblue, Hotrodz, redondoaveb and 1 others like this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

10-04-2021, 01:48 AM	#5652 (permalink)
Maldat Base Member Join Date: Aug 2021 Location: New Zealand Posts: 94 Drives: 2010 Z34 40th Manual Rep Power: 3372	sideways 3 times , no fish tails , just a quick flick

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 10:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 09:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM