What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

R1talin · 08-24-2021, 11:40 PM

Finished the stereo install on a 2016 370Z nismo with Navi/ kept the factory head unit and replaced the tweeters/ front door speakers / rear speakers and amp…. Was much easier that i thought it would be…. After the fact of researching/splicing/testing the wrong wires…..ill save y’all from 17 pages of details but it all worked out in the end.

After my research I purchased the following:
1. Front speakers & tweeters: Hertz DSK 130.3 - Dieci Series 5-1/4" component speaker system
2. Rear speakers: Hertz DCX 87.3 - Dieci Series 3-1/2" 2-way car speakers
3. Subwoofer Box - I was really looking for a JL stealth box but could not find one…. So went with a 2X10” box from conceptenclosures.com - specifically built for our 370z’s
4. Amplifier - JL Audio RD900/5 - 5-channel car amplifier — 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 2 ohms
5. Alpine W10S4 - BassLine Series 10" 4-ohm subwoofer (based the subwoofer decision on the size of the enclosure)

At the end of the day all is working as expected and I’m really happy with the outcome. Do want to get it tuned but sounds good (IMO) base on the tuning suggestions in the manual.

the attached diagram is what will be needed to need to splice into the harness coming from the factory head unit
Basically pins 1&9 and 2&10…

Credit to this guy for the post: https://youtu.be/yubzGi8UqZU

0394BD1E-C455-420C-9C08-A167DBDCA691.jpg

Ïon · 08-25-2021, 03:01 AM

Morimotto's and Wing install

big day for the Z, I know wings aren't for everyone but trying to keep the car unique opposed to the rest of the locals that just slam it with rims and a cbe

ZontheRocks · 08-25-2021, 09:07 AM

Das unique alright.

Glad you're enjoying your Z!

Hotrodz · 08-25-2021, 09:46 AM

Ion, you need to adjust your wind angel it should be flat or 0* to the ground.

Sent from my SM-G965U using Tapatalk

zeeder · 08-25-2021, 12:04 PM

Well, I tried to install the base tune, from Specialty Z, last night and got an error. Looks like there might already be an UpRev tune on the car so I've reached out to a local shop that uses UpRev to see if they can flash it back to stock so I can install the ECUTek Tune. Hopefully they're able to!

abm89 · 08-25-2021, 12:07 PM

Quote:

Originally Posted by Hotrodz

Ion, you need to adjust your wind angel it should be flat or 0* to the ground.

Sent from my SM-G965U using Tapatalk

Definitely. My wing is a super low-drag design, and I still can feel the difference with it set at 0 AoA

Hotrodz · 08-25-2021, 12:17 PM

Quote:

Originally Posted by abm89

Definitely. My wing is a super low-drag design, and I still can feel the difference with it set at 0 AoA

Mine is set at 0* for track use. I was told that I may need to adjust it to +5* depending on the track. Generally speaking you want it between +5* and -5*. I think for street you want least drag setup as possible unless you don't care about fuel economy and top end performance.

Sent from my SM-G965U using Tapatalk

abm89 · 08-25-2021, 01:01 PM

I remember adjusting mine at the track just to see how different angles affect the handling. Even the slightest angle was too much. I lost 2mph on the back straight at MSR-H lol.

I did inquire about Aeromotions' dynamic upgrade so i can add DRS (mainly for a flex if im honest I'll just use it on the highway to troll). $2500!

zeeder · 08-25-2021, 09:57 PM

Quote:

Originally Posted by zeeder

Well, I tried to install the base tune, from Specialty Z, last night and got an error. Looks like there might already be an UpRev tune on the car so I've reached out to a local shop that uses UpRev to see if they can flash it back to stock so I can install the ECUTek Tune. Hopefully they're able to!

Great news, the shop was able to revert me to the stock tune and I got the base tune from Seb installed and the first logs sent off to him. Weirdly, I didn’t notice much difference between the UpRev tune and the stock tune. That said, the throttle mapping in the lower revs is much better with the ECUTek tune! It’s hot as hell here right now so we’re just working on the warm weather tune lol.

k67p67 · 08-26-2021, 03:07 PM

A few months back I experienced a rotator cuff injury. Been on the mend since then. Certain movements are really painful, one of them being lifting a wheel and sliding it onto the studs. Even with light 3-piece wheels, the wheel+tire weighs 45-50 lbs. I was looking for some kind of aid to help me raise a wheel and hold it while I clocked it to line up the studs. At first I tried a floor jack but clocking the wheel was difficult. I decided to try a wheel dolly as it could perform both the lifting function and allow easy clocking of the wheel face to facilitate mounting. I couldn't be happier with the results and would recommend this to anyone in a similar situation. The dolly was about $125 and I picked up some rollerblade-type wheels for $25 because the original ones were crap. I had to build a plywood platform to add height when the car is way up on jack stands but, at lower levels, the dolly is all that is needed.

zeeder · 08-26-2021, 10:22 PM

Tire Rack had an $80 rebate for purchasing in-stock winter tires so I went ahead and purchased some VREDESTEIN WINTRAC PROs I got them in base 18 inch wheel sizes and will be putting them on base wheels I purchased. I’m looking forward to seeing how the Z handles this winter!

Ghostvette · 08-27-2021, 09:04 AM

Quote:

Originally Posted by zeeder

Tire Rack had an $80 rebate for purchasing in-stock winter tires so I went ahead and purchased some VREDESTEIN WINTRAC PROs I got them in base 18 inch wheel sizes and will be putting them on base wheels I purchased. I’m looking forward to seeing how the Z handles this winter!

It doesn't do bad, until the snow gets about 4" deep, then it's kind of a snow plow.

I drove my 2012 daily, even in the snow. I did tell the folks at work that if we got more than 3" of snow, I wasn't coming into work. Too many idiots that don't know how to drive...

zeeder · 08-27-2021, 01:38 PM

Quote:

Originally Posted by Ghostvette

It doesn't do bad, until the snow gets about 4" deep, then it's kind of a snow plow.

I drove my 2012 daily, even in the snow. I did tell the folks at work that if we got more than 3" of snow, I wasn't coming into work. Too many idiots that don't know how to drive...

Yeah, I think I'll do the same. Just work from home if we get anything major.

abm89 · 08-27-2021, 01:55 PM

Thanks for reminding me, I need to swap my conti extremes for the michelin AS4 on my subaru (at a minimum). The AWD was rendered useless this winter.

Hotrodz · 08-27-2021, 02:01 PM

Quote:

Originally Posted by abm89

I remember adjusting mine at the track just to see how different angles affect the handling. Even the slightest angle was too much. I lost 2mph on the back straight at MSR-H lol.

I did inquire about Aeromotions' dynamic upgrade so i can add DRS (mainly for a flex if im honest I'll just use it on the highway to troll). $2500!

The magic is knowing if losing 2 mph on the straights is a big deal. You may gain time in medium to high speed turns. I run a lot of short tracks so 2 mph loss may not be as big a deal vs better handling and speed in the twisty stuff!

Sent from my SM-G965U using Tapatalk

08-25-2021, 03:01 AM	#5597 (permalink)
Ïon Base Member Join Date: Jan 2020 Location: BC Posts: 58 Drives: 2020 370z Rep Power: 3551	Morimotto's and Wing install big day for the Z, I know wings aren't for everyone but trying to keep the car unique opposed to the rest of the locals that just slam it with rims and a cbe Rusty, Hotrodz, Ghostvette and 5 others like this.

08-25-2021, 09:07 AM	#5598 (permalink)
ZontheRocks Track Member Join Date: Mar 2017 Location: Central Florida Posts: 955 Drives: 2016 Nissan PW 370Z Rep Power: 34535	Das unique alright. Glad you're enjoying your Z! __________________ '16 Pearl White Sport \| Stillen Gen. 3 \| Motordyne ART \| Motordyne Shockwave \| ZSpeed \| Powertrix \| EVO-R \| Aeroworkz \| Nismo \| Z1 \| EcuTek \| Tuned by Seb @ SpecialtyZ

08-25-2021, 09:46 AM	#5599 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	Ion, you need to adjust your wind angel it should be flat or 0* to the ground. Sent from my SM-G965U using Tapatalk JARblue, Rusty and abm89 like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

08-25-2021, 12:04 PM	#5600 (permalink)
zeeder Enthusiast Member Join Date: Jun 2011 Location: Columbia, MO Age: 47 Posts: 460 Drives: ‘13 370Z ST 6M Rep Power: 3428	Well, I tried to install the base tune, from Specialty Z, last night and got an error. Looks like there might already be an UpRev tune on the car so I've reached out to a local shop that uses UpRev to see if they can flash it back to stock so I can install the ECUTek Tune. Hopefully they're able to! JARblue and Hotrodz like this. __________________ Zack FI catback, HFC, and Start Button - Z1 Intake - Nismo S-Tune Spoiler - PasswordJDM V2 Shift Knob

08-25-2021, 01:01 PM	#5603 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,382 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	I remember adjusting mine at the track just to see how different angles affect the handling. Even the slightest angle was too much. I lost 2mph on the back straight at MSR-H lol. I did inquire about Aeromotions' dynamic upgrade so i can add DRS (mainly for a flex if im honest I'll just use it on the highway to troll). $2500! JARblue, Rusty and Hotrodz like this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

08-26-2021, 03:07 PM	#5605 (permalink)
k67p67 Enthusiast Member Join Date: Oct 2016 Location: Rancho Cucamonga, CA Posts: 300 Drives: 2017 Nismo Tech 6MT Rep Power: 3937	A few months back I experienced a rotator cuff injury. Been on the mend since then. Certain movements are really painful, one of them being lifting a wheel and sliding it onto the studs. Even with light 3-piece wheels, the wheel+tire weighs 45-50 lbs. I was looking for some kind of aid to help me raise a wheel and hold it while I clocked it to line up the studs. At first I tried a floor jack but clocking the wheel was difficult. I decided to try a wheel dolly as it could perform both the lifting function and allow easy clocking of the wheel face to facilitate mounting. I couldn't be happier with the results and would recommend this to anyone in a similar situation. The dolly was about $125 and I picked up some rollerblade-type wheels for $25 because the original ones were crap. I had to build a plywood platform to add height when the car is way up on jack stands but, at lower levels, the dolly is all that is needed. God-Speed, JARblue, cv129 and 7 others like this. __________________ 2017 370Z Nismo Tech 6MT PART OUT IN PROGRESS Work \| Motordyne \| Powertrix \| Swift \| Michelin \| Takeda \| Hotchkis \| RJM \| Voodoo13 \| SPL \| SPC \| Z1 Motorsports \| ZSpeed \| Morimoto \| Craft Square Last edited by k67p67; 08-27-2021 at 12:54 AM.

08-26-2021, 10:22 PM	#5606 (permalink)
zeeder Enthusiast Member Join Date: Jun 2011 Location: Columbia, MO Age: 47 Posts: 460 Drives: ‘13 370Z ST 6M Rep Power: 3428	Tire Rack had an $80 rebate for purchasing in-stock winter tires so I went ahead and purchased some VREDESTEIN WINTRAC PROs I got them in base 18 inch wheel sizes and will be putting them on base wheels I purchased. I’m looking forward to seeing how the Z handles this winter! __________________ Zack FI catback, HFC, and Start Button - Z1 Intake - Nismo S-Tune Spoiler - PasswordJDM V2 Shift Knob

08-27-2021, 01:55 PM	#5609 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,382 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	Thanks for reminding me, I need to swap my conti extremes for the michelin AS4 on my subaru (at a minimum). The AWD was rendered useless this winter. JARblue, zeeder and Hotrodz like this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 10:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 09:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM