What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

alcheng · 05-16-2020, 03:24 PM

Quote:

Originally Posted by ABUNAI NISMO

Installed the Hotchkis rear sway bar today. This bar is adjustable. The hole on the very end is for the stiffest setting. The 3rd hole farthest from the end of the bar is for the softest. I used the middle hole! I also installed the Bell Raceworks differential brace too! I might as well have since I was down there anyhow!

The build is coming along. Slow but sure! I hope to 50% complete by the end of 2020!

WISHLIST

19X9.5
19X10.5 OMARI SPEC LMGT4 (gloss or satin black no preference)

question: how much downforce or hp do you gain with this Taco Mod..??

I am interested....

BettyZ · 05-16-2020, 06:47 PM

Latches are IN.

Sent from my SM-G955U using Tapatalk

madwi · 05-16-2020, 06:50 PM

Quote:

Originally Posted by BettyZ

Latches are IN.

( Click to show/hide )

Sent from my SM-G955U using Tapatalk

Any reason why you put them on backwards?

-ZS-Carpenter · 05-16-2020, 09:16 PM

Quote:

Originally Posted by madwi

Any reason why you put them on backwards?

That's just his camera

Flip it around a couple times

old guy · 05-16-2020, 09:42 PM

Quote:

Originally Posted by -ZS-Carpenter

That's just his camera

Flip it around a couple times

BettyZ · 05-16-2020, 09:45 PM

Quote:

Originally Posted by madwi

Any reason why you put them on backwards?

I wanted to do it Joby-style.

redondoaveb · 05-16-2020, 10:44 PM

Here's how this guy did his.

BettyZ · 05-17-2020, 12:51 AM

Quote:

Originally Posted by redondoaveb

Here's how this guy did his.

Mmhmm..

Sent from my SM-G955U using Tapatalk

Gooch · 05-17-2020, 03:00 PM

Quote:

Originally Posted by Gooch

Been tuning my stock block BP kit build with Seb the last few days. Things were great up until today, a light tapping coming from somewhere. If I didn’t know any better, I’d say it is an exhaust leak. Going to take everything apart tomorrow.. praying it’s not from one of the headers.

Turned out to be the passenger side header flange to where the cat would be. Replaced both gaskets for good measure; the original was cooked in two different places. All is well now. And fixed two rattles, one was my exhaust hitting the W brace and the other was my BOV rubbing against one of my horns. What a machine.

madwi · 05-17-2020, 03:53 PM

Quote:

Originally Posted by Gooch

Turned out to be the passenger side header flange to where the cat would be. Replaced both gaskets for good measure; the original was cooked in two different places. All is well now. And fixed two rattles, one was my exhaust hitting the W brace and the other was my BOV rubbing against one of my horns. What a machine.

That reminds me, I never reinstalled that horn, only running the one.

BettyZ · 05-17-2020, 04:02 PM

Quote:

Originally Posted by madwi

That reminds me, I never reinstalled that horn, only running the one.

Dewla dezigns air guide has the horn relocated to the front fastener for the passenger side headlight.

Z_ealot · 05-17-2020, 04:38 PM

Still waiting on my replacement idler pulley to come in so she's still sitting

...i think I'm having withdrawals

Hotrodz · 05-17-2020, 04:51 PM

Quote:

Originally Posted by Z_ealot

Still waiting on my replacement idler pulley to come in so she's still sitting

...i think I'm having withdrawals

Stop sniveling! You haven't been waiting long enough to have any signs or symptoms of withdrawals. I have been waiting since the week before Thanks Giving 2018 for my Z!

Sent from my SM-G965U using Tapatalk

ZontheRocks · 05-17-2020, 05:02 PM

Crossing my fingers on one hell of a deal on a 34-row Z1 oil cooler setup that just hit the classifieds.

Nismo GT500 shift knob arrived last week and replaced my NLA Nismo Ti with a burnt finish. I feel like the GT500 goes better with the car aesthetically and the extra girth fits my hand better. Yukka yukka

Rusty · 05-17-2020, 05:18 PM

Quote:

Originally Posted by Hotrodz

Stop sniveling! You haven't been waiting long enough to have any signs or symptoms of withdrawals. I have been waiting since the week before Thanks Giving 2018 for my Z!

Sent from my SM-G965U using Tapatalk

05-16-2020, 06:47 PM	#4742 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 37 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684371	Latches are IN. Sent from my SM-G955U using Tapatalk JARblue, Rusty, axmea? and 8 others like this. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

05-17-2020, 05:02 PM	#4754 (permalink)
ZontheRocks Track Member Join Date: Mar 2017 Location: Central Florida Posts: 957 Drives: 2016 Nissan PW 370Z Rep Power: 34535	Crossing my fingers on one hell of a deal on a 34-row Z1 oil cooler setup that just hit the classifieds. Nismo GT500 shift knob arrived last week and replaced my NLA Nismo Ti with a burnt finish. I feel like the GT500 goes better with the car aesthetically and the extra girth fits my hand better. Yukka yukka Hotrodz, madwi, Ghostvette and 3 others like this. __________________ '16 Pearl White Sport \| Stillen Gen. 3 \| Motordyne ART \| Motordyne Shockwave \| ZSpeed \| Powertrix \| EVO-R \| Aeroworkz \| Nismo \| Z1 \| EcuTek \| Tuned by Seb @ SpecialtyZ

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 10:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 09:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM

05-17-2020, 04:38 PM	#4752 (permalink)
Z_ealot A True Z Fanatic Join Date: Sep 2010 Location: Albuquerque, NM Posts: 2,045 Drives: 09 370Z Touring/Sprt Rep Power: 10091	Still waiting on my replacement idler pulley to come in so she's still sitting ...i think I'm having withdrawals